|
|
Effects of variable pitch inducer on cavitation performance of highspeed centrifugal pumps
|
SUN Qiangqiang1, JIANG Jin1, 2, ZHANG Shuaishuai1, CHEN Qi3 |
1.School of Power and Mechanical Engineering, Wuhan University, Wuhan, Hubei 430072, China; 2.Key Lab of Hydraulic Machi-nery Transient, MOE, Wuhan University, Wuhan, Hubei 430072, China; 3. Hubei Water Resources Research Institute, Wuhan, Hubei 430070, China |
|
|
Abstract In order to study the effect of geometry shape of variable pitch inducer and coordination between inducer and impeller including axial distance and circumferential angle on the cavitation perfor-mance of the high-speed centrifugal pump, the turbulence model of RNG k-ε and cavitation model of Schnerr-Sauer were used to investigate the cavitation performance of high-speed centrifugal pump with different inducers at diverse coordination conditions. The results show that the variable pitch inducer which the blade diameter is constant can suppress the cavitation of the high-speed centrifugal pump more effectively compared with the variable pitch inducer with variable blade diameter. When the distance between inducer and impeller is too small or too large, the pressure coefficient and cavitation number of inducer decrease and the vapor volume ratio in the impeller flow channel has an upward trend. As a result of that, efficiency and lift coefficient of the high-speed centrifugal pump decrease. In addition, the cavitation performance of the pump fluctuates as the circumferential angle changes, however the change regularity is not obvious.
|
Received: 07 September 2016
|
|
|
|
[1]CAMPOS-AMEZCUA R, BAKIR F, CAMPOS-AMEZCUA A, et al. Numerical analysis of unsteady cavitating flow in an axial inducer[J]. Applied thermal engineering, 2015, 75(2):1302-1310.[2]BRENNEN C E. Cavitation and bubble dynamics[M]. New York:Oxford University Press,1995:609-617.[3]WATANABE S, ENOMOTO N, ISHIZAKA K, et al. Suppression of cavitation surge of a helical inducer occurring in partial flow conditions[J]. Turbomachinery, 2004, 32:94-100.[4]JI B, LUO X, ARNDT R E A, et al. Numerical simulation of three dimensional cavitation shedding dynamics with special emphasis on cavitation—vortex interaction[J]. Ocean engineering, 2014, 87:64-77.[5]NOGUERA R, REY R, MASSOUH F, et al. Design and analysis of axial pumps[J].International journal & magazine of engineering, technology, management and research, 2015,2(8):701-705.[6]PATELLA R F, REBOUD J L, LAMBERT P A. Numerical analysis of cavitation instabilities in inducer blade cascade[J]. Journal of fluids engineering, 2005, 130:1441-1448.[7]LEE K H, CHOI J W, KANG S H. Cavitation perfor-mance and instability of a two-bladed inducer[J]. Journal of propulsion & power, 2015, 28(6):1168-1175.[8]TAMURA Y, MATSUMOTO Y. Improvement of bubble model for cavitating flow simulations[J]. Journal of hydrodynamics, 2009, 21(1):41-46.[9]KUROKAWA J, IMAMURA H, CHOI Y D, et al. Suppression of cavitation in inducer by J-groove[J]. Turbomachinery, 2005, 33:592-600.[10]IMAMURA H, KUROKAWA J, MATSUI J, et al. Passive control of rotating stall in a parallel wall vaned diffuser by J-grooves[J]. Journal of fluids engineering, 2000, 122:90-96.[11]YAKHOT V, ORSZAG S A. Renormalization group analysis of turbulence. I. Basic theory[J]. Journal of scientific computing, 1986, 1(1):3-51. |
|
|
|