|
|
Numerical study on cavitation characteristics of CAP1400 nuclear main coolant pump |
ZHU Rongsheng, CHEN Zongliang, Wang Xiuli, Cao Liang |
National Research Center of Pumps, Jiangsu University, Zhenjiang, Jiangsu 212013, China |
|
|
Abstract In order to study the cavitation problem of CAP1400 nuclear main coolant pump, the steady numerical simulation on the cavitation problem was conducted on the the basis of hydraulic design and three-dimensional modeling.The distribution characteristics of vapor volume fraction on the suction side of impeller blades, vapor volume fraction between blades and medium temperature between blades were acquired under the normal condition, incipient cavitation, critical cavitation, severe cavitation and fracture cavitation.The calculation results show that the nuclear main coolant pump cavitation occurs on the suction side of impeller blades first and develops in the direction of pressure side of blade and hub.Vapor volume fraction growth trend is the same from the relative position S=0.35-0.45, and vapor volume fraction is relatively smooth from S=0.45-0.50 in the impeller passage at the stage of critical cavitation and severe cavitation.Temperature gradient was formed in the liquid phase near the two-phase interface due to heat transfer between the two-phase caused by phase change.The vapor medium temperature inside the cavity is lower than the temperature of the liquid medium, and the temperature difference increases with the development of cavitation.
|
Received: 01 June 2015
|
|
|
|
[1]杨敏官,陆胜,高波,等. 叶片厚度对混流式核主泵叶轮能量性能影响研究[J]. 流体机械,2015, 43(5):28-32. YANG Minguan,LU Sheng,GAO Bo, et al. Influence of blade thickness on energy performance of mixed flow nuclear main pump[J]. Fluid machinery, 2015, 43(5):28-32.(in Chinese)[2]李靖, 王晓放, 周方明. 非均布导叶对核主泵模型泵性能及压力脉动的影响[J]. 流体机械, 2014, 42(9):19-24. LI Jing,WANG Xiaofang,ZHOU Fangming. Influence of uneven guide blade on performance and pressure fluctuation of nuclear model pump[J]. Fluid machinery, 2014, 42(9):19-24.(in Chinese)[3]宫晓清, 孟祥铠, 李纪云,等. 核主泵用流体动压型机械密封温度场的数值研究[J]. 流体机械, 2015,43(7):16-21. GONG Xiaoqing,MENG Xiangkai,LI Jiyun,et al. Numerical research on temperature of hydrodynamic mechanical seals in reactor coolant pump[J]. Fluid machinery, 2015,43(7):16-21.(in Chinese)[4]赵星宇, 刘莹, 温庆丰,等. 核主泵备用机械密封材料的摩擦性能研究[J]. 流体机械, 2012, 40(5):1-5. ZHAO Xingyu,LIU Ying,WEN Qingfeng,et al. Study on frictional performance of mechanical seal spare material used for nuclear coolant pump[J]. Fluid machinery, 2012, 40(5):1-5.(in Chinese)[5]蔡龙,张丽平.浅谈压水堆核电站主泵[J].水泵技术,2007(4):1-5. CAI Long,ZHANG Liping.Discussion of PWR main pump[J].Pump technology,2007(4):1-5.(in Chinese)[6]龙云,朱荣生,付强,等.核主泵小流量工况下不稳定流动数值模拟[J].排灌机械工程学报,2014,32(4):290-295. LONG Yun,ZHU Rongsheng,FU Qiang,et al.Numerical analysis on unstable flow of reactor coolant pump under small flow rate condition[J].Journal of drainage and irrigation machinery engineering,2014,32(4):290-295.(in Chinese)[7]王春林,彭娜,康灿,等.模型泵内部流场的数值模拟[J].核动力工程,2009,30(4):81-85. WANG Chunlin,PENG Na,KANG Can,et al.Numerical simulation of interior flow field of nuclear model pump[J].Nuclear power engineering,2009,30(4):81-85.(in Chinese).[8]博金海,姜胜耀,姚梅生,等.上空腔小破口失水事故模拟实验[J].核动力工程,1990(5):57-60. BO Jinhai, JIANG Shengyao,YAO Meisheng,et al. Simulation experiment of small break LOCA in upper plenum[J].Nuclear power engineering,1990(5):57-60.(in Chinese).[9]RAHIM F C, RAHGOSHAY M, MOUSAVIAN S K. A study of large break LOCA in the AP1000 reactor containment[J]. Progress in nuclear energy, 2012, 54(1): 132-137.[10]CHAN A M C, KAWAJI M, NAKAMURA H, et al. Experimental study of two-phase pump performance using a full size nuclear reactor pump[J]. Nuclear engineering and design, 1999, 193(s1): 159-172.[11]GAO Hong, GAO Feng, ZHAO Xianchao, et al. Transient flow analysis in reactor coolant pump systems du-ring flow coastdown period[J]. Nuclear engineering and design, 2011, 241(2):509-514.[12]GROUDEV Pavlin, ANDREEVA Marina, PAVLOVA Malinka, et al. Investigation of main coolant pump trip problem in case of SB LOCA for Kozloduy Nuclear Power Plant WWER-440/V230[J]. Annals of nuclear energy, 2015, 76:137-145.[13]王一名. 基于模型变换法设计的混流泵空化研究与评价[D]. 大连:大连理工大学,2013.[14]陆鹏波. 高温高压混流泵空化及其泵结构设计影响分析[D]. 大连:大连理工大学,2012.[15]缪方明,陈宁,张江涛. 核电常规岛给水泵CAP1400转子动力学分析[J].热能动力工程,2014(4):439-444. MIAO Fangming, CHEN Ning, ZHANG Jiangtao. Dynamic analysis of the CAP 1400 rotor of a feed water pump in the conventional island of a nuclear power station[J].Journal of engineering for thermal energy and power,2014(4):439-444.(in Chinese)[16]ZHANG Qiong, GUO RuiPing, ZHANG ChunMing, et al. Radioactive airborne effluents and the environmental impact assessment of CAP1400 nuclear power plant under normal operation[J]. Nuclear engineering and design,2014,280:579-585.[17]ROCHA P A C, ROCHA H H B, CARNEIRO F O M, et al. k-ω, SST(shear stress transport)turbulence model calibration: a case study on a small scale horizontal axis wind turbine[J]. Energy, 2013, 65:412-418.[18]BISWADIP Shome. Numerical study of turbulent flow in heated circular tube using transitional shear stress transport turbulence model[J]. International journal of thermal sciences,2014,79:90-102.[19]MEJRI I,BAKIR F,REY R.Comparison of computatio-nal results obtained from a homogeneous cavitation model with experimental investigations of three inducers[J].Journal of fluids engineering, 2006, 128(6):1308-1323. |
|
|
|