|
|
Numerical simulation of two-phase turbulent flow in Francis turbine passage on sediment erosion |
HUANG Jianfeng1, ZHANG Lixiang2, YAO Ji2, LONG Liyan1 |
1.Faculty of Water Conservation, Yunnan Agricultural University, Kunming, Yunnan 650201, China; 2.Department of Engineering Mechanics, Kunming University of Science and Technology, Kunming, Yunnan 650500, China |
|
|
Abstract This study aims to investigate the flow behavior of solid-liquid two-phase flow based on sediment erosion in Francis turbine, the numerical simulation of three-dimensional two-phase turbulent flow in the Francis turbine passage was conducted by the mixture model for an algebraic slip formulation in the Euler—Euler approach based on the CMFD theory, the polyhedron mesh technique, standard k-ε model, SIMPLEC algorithm and multiple reference frame model. The silt volume fraction distributions in guide vanes and blade passage were obtained in the small opening case by the ANSYS Fluent software. The position and degree of sediment erosion in the Francis turbine passage were analyzed. The simulation results coincided with the distribution of sediment particles on the blade runner practical wear. The results show that this method can be used to simulate the 3D turbulent flow and true multiphase flow with sediment erosion in Francis turbine,which provides a significant reference for revealing the influence mechanism of the sediment particles interacting with water in the solid-liquid two-phase turbulent flow field that can induce turbine vibration and solving practical engineering problems.
|
Received: 14 April 2015
|
|
|
|
[1]车得福,李会雄.多相流及其应用[M].西安:西安交通大学出版社,2007.[2]THAPA B S, THAPA B, DAHLHAUG O G. Current research in hydraulic turbines for handling sediments[J]. Energy, 2012, 47(1):62-69.[3]THAPA B S, DAHLHAUG O G, THAPA B. Sediment erosion in hydro turbines and its effect on the flow around guide vanes of Francis turbine[J]. Renewable & sustainable energy reviews, 2015, 49:1100-1113.[4]GOHIL P P, SAINI R P. Coalesced effect of cavitation and silt erosion in hydro turbines—A review[J]. Renewable & sustainable energy reviews, 2014, 33(2):280-289.[5]吴伟章,吴玉林,任静,等.水轮机转轮内部磨损预测[J].工程热物理学报,2000,21(6):709-712. WU Weizhang, WU Yulin, REN Jing,et al.Numerical simulation on silt abrasion in a hydraulic turbine runner[J]. Journal of engineering thermophysics, 2000,21(6):709-712.(in Chinese)[6]唐学林,唐宏芬,吴玉林.水轮机转轮内固液两相紊流场数值模拟及磨蚀预估[J].工程热物理学报,2001,22(1):51-54. TANG Xuelin, TANG Hongfen, WU Yulin. Simulating and erosion prediction of 3D two phases flow through a turbine runner[J].Journal of engineering thermophysi-cs, 2001,22(1):51-54.(in Chinese)[7]高忠信,周先进,张世雄,等.水轮机转轮固液两相三维紊流计算及磨损预估[J].水利学报,2002(9):37-43. GAO Zhongxin, ZHOU Xianjin, ZHANG Shixiong,et al. Numerical prediction on silt wearing of turbine runner by means of two-phase turbulent flow simulation [J]. Journal of hydraulic engineering,2002(9):37-43.(in Chinese)[8]李琪飞,李仁年,韩伟,等.混流式水轮机引水、导水部件内部固液两相流动的数值分析[J].兰州理工大学学报,2008,34(6): 47-50. LI Qifei, LI Rennian, HAN Wei, et al. Numerical analysis of inner solid-liquid two-phase flow in diversion and guiding apparatus in Francis turbine[J].Journal of Lanzhou University of Technology, 2008,34(6):47-50.(in Chinese)[9]李琪飞,李仁年,韩伟,等.不同固相体积分数下水轮机内部两相流动的数值模拟[J].兰州理工大学学报,2009,35(4): 43-47. LI Qifei, LI Rennian, HAN Wei, et al. Numerical simulation of inner two-phase flow with different volumetric fractions of solid-phase in hydraulic turbines[J].Journal of Lanzhou University of Technology, 2009,35(4):43-47.(in Chinese)[10]钱忠东,张凯,王志远,等.双吸式离心泵叶片头部形状对泥沙磨损的影响[J].排灌机械工程学报,2014,32(2):103-107. QIAN Zhongdong, ZHANG Kai, WANG Zhiyuan,et al. Effect of blade leading edge shape on sediment erosion of blade in double-suction centrifugal pumps[J]. Journal of drainage and irrigation machinery engineering, 2014,32(2):103-107.(in Chinese)[11]钱忠东,王焱,谢华.副叶片对双吸离心泵口环泥沙磨损的影响分析[J].水力发电学报,2012,31(4):232-237. QIAN Zhongdong,WANG Yan,XIE Hua. Influence of back blade on sediment erosion of impeller ring in double suction pump[J]. Journal of hydroelectric engineering, 2012,31(4):232-237.(in Chinese)[12]齐学义,周慧利,高志远.含沙水流水轮机两列导叶相对位置对活动导叶磨损的影响[J].兰州理工大学学报,2013,39(1):37-41. QI Xueyi,ZHOU Huili, GAO Zhiyuan. Influence of relative setting position of double guide vane on abrasion of guide vane in hydraulic turbine operated in silt-laden water flow[J].Journal of Lanzhou University of Technology, 2013, 39(1):37-41.(in Chinese)[13]MANNINEN M, TAIVASSALO V, KALLIO S. On the mixture model for multiphase flow[M]. Espoo: VTT Publications, 1996. |
|
|
|