|
|
Numerical simulation of cavitation flow in counter-rotating axial-f〓 low pump |
Huang Dan, Pan Zhongyong, Pan Xiwei, Feng Zizheng, Zhang Xiao |
National Research Center of Pumps, Jiangsu University, Zhenjiang, Jiangsu 212013, China |
|
|
Abstract At the designed operating conditions of the counter-rotating axial-flow pump, the cavitation flow field were simulated using cavitation model, Rayleigh-Plesset equations and the SST turbulence model, for 3 configurations: the pump with front impeller only, the pump with rear impeller only, and the pump with both impellers.The H-NPSH curves of the three cases were established based on the simulation. The cavitation flow of front impeller and rear impeller were analyzed by comparing the primary cavitation, critical cavitation, and serious cavitation.The distribution of static pressure and vapor volume fraction of the blade's suction surface and pressure surface were observed and the vapor volume fraction of the suction surface was obtained. The results show that cavitation first occurred on the local low-pressure area on the back of the blade′s leading edge,then extended to hub from leading edge while decreasing NPSH. The cavitation development of the front impeller and rear impeller are not synchronous. The results reveal that the cavitation flow in counter-rotating axial-flow pump and its excellent cavitation performance.
|
Received: 31 March 2014
|
|
|
|
[1]王立祥.船舶喷水推进[J].船舶,1997(3):45-52. Wang Lixiang. Waterjet propulsion of ships[J]. Ship and Boat,1997(3):45-52.(in Chinese)[2]魏晓巍.喷水推进器[J].船舶,1998(4):39-41. Wei Xiaowei. Waterjet propulsion [J].Ship and Boat,1998(4):39-41.(in Chinese)[3]曹璞钰,王洋,李贵东,等. 喷水推进器最佳工况[J]. 排灌机械工程学报, 2015, 33(2): 145-151. Cao Puyu,Wang Yang,Li Guidong,et al. Optimum condition of water-jet propulsion[J]. Journal of Drainage and Irrigation Machinery Engineering, 2015, 33(2): 145-151.( in Chinese)[4]孙存楼,王永生,黄斌.船舶喷水推进器特殊工况性能研究[J].哈尔滨工程大学学报,2011,32(7):867-872. Sun Cunlou, Wang Yongsheng, Huang Bin.Research on waterjet performance in special work conditions[J].Journal of Harbin Engineering University,2011,32(7):867-872.(in Chinese)[5]Norbert B.Numerical analysis of a waterjet propulsion system[D].Netherlands:Library Eindhoven University of Technology,2006.[6]刘承江,王永生,张志宏,等.喷水推进器推力的CFD计算方法研究[J].计算力学学报,2008,25(6):927-931. Liu Chengjiang,Wang Yongsheng,Zhang Zhihong,et al.Research on computational methods of waterjet thrust using CFD[J].Chinese Journal of Computational Mechanics,2008,25(6):927-931.(in Chinese)[7]Kooiker K T,Verbeek K.Performance and cavitation analysis of a waterjet system in a cavitation tunnel[C]//The 7th International Conference Oil Fast Sea Transportation(FAST′03).Ischia,Italy:MARIN,2003:57-62.[8]Wienken W,Stillek K J.A method to predict cavitation inception using large-eddy simulation and its application to the flow past a square cylinder[J].Journal of Fluids Engineering,2006,128(2):316-326.[9]蒙盛吉.CFD分析概述及在离心泵改进设计中的应用[J].化工设备与管道,2013,50(4):55-59. Meng Shengji.Description of CFD analysis and its application in reform design of centrifugal pump[J]. Process Equipment & Piping,2013,50(4):55-59.( in Chinese)[10]段向阳,王永生,苏永生,等.喷水推进器空化监测技术研究[J].舰船科学技术,2009,31(5):39-41. Duan Xiangyang,Wang Yongsheng,Su Yongsheng,et al.Research on monitoring techniques of waterjet cavitation[J].Ship Science and Technology, 2009,31(5):39-41.(in Chinese)[11]刘承江,王永生.混流式喷水推进器空化性能数值分析[J].机械工程学报,2009,45(12):76-83. Liu Chengjiang,Wang Yongsheng.Numerical simulation of a mixed-flow waterjet cavitating performance[J].Journal of Mechanical Engineering, 2009,45(12):76-83.(in Chinese)[12]Lindau J W, Pena C,Baker W J,et al. Modeling of ca-vitating flow through waterjet propulsors[J].International Journal of Rotating Machinery,2012(5):1-13.[13]Lindau J W, Boger D A, Medvitz R B, et al. Propeller cavitation breakdown analysis[J]. Journal of Fluids Engineering, 2005,127(5):95-1002.[14]王德军,周惠忠,黄志勇,等.对旋式轴流泵全流道三维非定常紊流场的数值模拟[J].工程力学,2004,21(3):150-154. Wang Dejun,Zhou Huizhong,Huang Zhiyong,et al.3D numerical simulation on unsteady turbulence flow through the full passage of a contra-rotating axia flow pump[J].Engineering Mechanics, 2004,21(3):150-154.(in Chinese)[15]王德军,周惠忠,黄志勇.对旋式轴流泵叶轮水力性能的研究[J].核动力工程,2004,25(1):59-63. Wang Dejun,Zhou Huizhong,Huang Zhiyong.Study on the impeller hydraulic performance for the contra-rotating axial flow pump[J].Nuclear Power Engineering, 2004,25(1):59-63.(in Chinese)[16]王德军,周惠忠,黄志勇,等.对旋式轴流泵全流道三维定常紊流场的数值模拟[J].清华大学学报:自然科学版,2003,43(10):1339-1342. Wang Dejun, Zhou Huizhong, Huang Zhiyong,et al.3D steady turbulence flow numerical simulation on the full passage of a contra-rotating axia flow pump[J].Journal of Tsinghua University:Science and Technology, 2003,43(10):1339-1342.(in Chinese)[17]郑磊,王国玉,刘影.前后叶轮匹配对双级轴流式喷水推进器性能的影响[J].车辆与动力技术,2006(4):18-21. Zheng Lei,Wang Guoyu,Liu Ying.Effects of impeller′s matching to double-stage axial flow water-jet propeller performance[J].Vehicle & Power Technology, 2006(4):18-21.(in Chinese) |
|
|
|