|
|
Design of axial auxiliary impeller in external circulation cooling system of large pump |
Jia Yun1, Jia Yanwei2, Wei Xianzhu3 |
1.School of Energy Science and Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001, China; 2.Harbin Electric Power Equipment Co. Ltd., Harbin, Heilongjiang 150066, China; 3.State Key Laboratory of Hydropower Equipment, Harbin, Heilongjiang 150040, China |
|
|
Abstract In order to design and validate the auxiliary impeller required by the cycle power of the oil-lubricated external circulation cooling system on the reactor coolant pump′s bi-directional thrust bearing, the CFD method is applied to present a numerical analysis for the pressure feature and flow rate within the oil impeller. The objective is to demonstrate the vector distribution of the relative velocity on the center surface of the flow path, and to verify the possibility of creating any flush angle from the inlet flow of the vane, the pros and cons of the vane shape design and how well it functionally matches the vane. The numerical analysis intuitively reflects the flow parameters and patterns generated by the designed shape of the vane, indicates the fact that the velocity at the vane′s inlet mainly affects the tangent angle; thus, effectively lowers the damaging impact on any system devices located adjacent to the rear outlet of the vane. Through simulation of the oil-lubricating circulation, numerical analysis are comparatively analyzed with the testing results, for all 5 complete working processes, deviations are uniformly less than 5% and precisely satisfied lubricating oil′s flow, head, zero-impact on flows and other operating requirements. This paper concludes the practical application of a simplified numerical analysis and reasoning could replace the repetitive testing employed in the traditional design process for axial auxiliary impellers. It has been successfully applied in the design of reactor coolant pump.
|
Received: 14 August 2014
|
|
|
|
[1]刘平安, 武仲德. 三峡发电机推力轴承外循环冷却技术[J].大电机技术,2008(1):7-12. Liu Ping′an, Wu Zhongde. Technology of external circulation of thrust bearing for three gorges [J].Large Electric Machine and Hydraulic Turbine, 2008(1):7-12.(in Chinese)[2]何少润.高转速蓄能机组水导轴承外循环冷却系统的改造[J]. 水电站机电技术,2010,33(5):1-5. He Shaorun. Renovation of external circulation cooling system of turbine guide bearing of high-speed storage unit [J]. Mechanical & Electrical Technique of Hydropower Station, 2010,33(5):1-5.(in Chinese)[3]杨晓斌. 浅谈水电站转轮巧加泵叶减轻水封磨蚀[J]. 石河子科技,2008(2):51-52. Yang Xiaobin. Reducing the abrasion of the water seal by adding the vane of impeller in hydroelectric station [J]. Shihezi Science and Technology, 2008(2):51-52.(in Chinese)[4]蔡龙,张丽萍. 浅谈压水堆核电站主泵[J]. 水泵技术,2007(4):1-9. Cai Long, Zhang Liping. About pressurized water reactor nuclear main pump [J]. Pump Technology, 2007(4):1-9.(in Chinese)[5]关醒凡.现代泵理论与设计[M].北京:中国宇航出版社,2011.[6]黄欢明,高红. 轴流泵叶轮内部流动的数值模拟与实验 [J].上海交通大学学报,2009,43(1):124-128. Huang Huanming, Gao Hong. Numerical simulation and experimental study on flow field in an axial flow pump[J]. Journal of Shanghai Jiaotong University, 2009,43(1):124-128.(in Chinese)[7]高波,刘栋. 300MW轴流式核主泵模型内流测量方案探讨[J].流体机械,2009,37(1):20-27. Gao Bo, Liu Dong. Preliminary approach to internal flow measurement scheme of 300MW axial-flow nuclear reactor coolant pump model[J]. Fluid Machinery, 2009,37(1):20-27.(in Chinese)[8]Shi Weidong, Zhang Desheng, Guan Xingfan. Numerical and experimental investigation of high-efficiency axial-flow pump [J]. Chinese Journal of Mechanical Engineering, 2010, 23(1): 38-44.[9]Lin L, Wang Y Y. Investigation of scale effect for the computation of turbulent flow around a circular cylinder [J]. Acta Mechanica Sinica, 2013, 29(5):641-648.[10]Li W G. Effects of blade exit angle and liquid viscosity on unsteady flow in centrifugal pumps [C]//Procee-dings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy.London: SAGE, 2012:580-599.[11]Steinmann A, Wurm H, Otto A. Numerical and experimental investigations of the unsteady cavitating flow in a vortex pump [J]. Journal of Hydrodynamics, Ser.B, 2010,22(5):324-329.[12]Ha T W, Choe B S. Numerical simulation of rotordynamic coefficients for eccentric annular-type-plain-pump seal using CFD analysis[J].Journal of Mechanical Scien-ce and Technology, 2012, 26(4): 1043-1048.[13]Shojaeefard M H, Tahani M, Ehghaghi M B, et al. Numerical study of the effects of some geometric characteris-tics of a centrifugal pump impeller that pumps a viscous fluid[J]. Computers & Fluids, 2012, 60: 61-70.[14]Lucius A, Brenner G. Unsteady CFD simulations of a pump in part load conditions using scale-adaptive simulation[J]. International Journal of Heat and Fluid Flow, 2010, 31(6): 1113-1118.[15]Bjarne B J, Sverre D K. Numerical computation of the pump turbine characteristics [C]//Proceedings of the XXIst IAHR Symposium on Hydraulic Machinery and Systems, 2002:129-133. |
|
|
|