|
|
|
| Dynamic and static performance of flow stability valve |
| Li Sihai,Huang Liuyi,Wei Wei. |
| To study the static and dynamic performances of flow stability valve,main chamber balance pressure p1 was calculated, and under other throttling parameters keeping still,p1 can be regarded as a linear combination of system input pressure p0 and load pressure p2.On the basis of p1, the mathematical relationship between compensation spool displacement rate Δxpc/xpc and static parameters was obtained, and it can be found that compensation spool is not sensitive to the change of p2, however, it is sensitive to p0 change. The valve dynamic model was built and the dynamic performances were simulated based on HydraulicLabraries in AMESim HCD, and for p0 increasing, load motion efficiency can be improved, and external and internal differential pressures become larger when the motion of load appears unstable.For Mincreasing, load speed and load acceleration decrease, and internal and external differential pressures all decrease, when the stability of dynamic transition is improved.For spring stiffness Kincreasing, load dynamic change process start time is backward delayed by a period of time, and for internal differential pressure decreasing, external differential pressure steady value almost remains. The influence of changing diameters dton load dynamic performance is limited, and the change of dt almost has no influence on external differential pressure. However, with dtincreasing, internal differential pressure has a slight increase. |
|
| ［1］袁寿其,梁赟,袁建平,等.离心泵进口回流流场特性的数值模拟及试验［J］.排灌机械工程学报, 2011, 29(6): 461-465.Yuan Shouqi, Liang Yun, Yuan Jianping, et al. Numerical simulation and experiment on characteristics of centrifugal pump inlet recirculation ［J］.Journal of Drainage and Irrigation Machinery Engineering, 2011, 29(6): 461-465.(in Chinese)［2］冯晓迪. 液压阀动态特性试验回路仿真研究［J］. 液体传动与控制, 2009(4): 12-14.Feng Xiaodi. Simulation research of hydraulic valve dynamic characteristics test circuit based on AMEsim［J］. Fluid Power Transmission and Control, 2009(4): 12-14.(in Chinese)［3］张恒, 姚平喜, 段少帅, 等. 基于Fluent的负载敏感平衡阀流场分析［J］. 液压气动与密封, 2010(4): 32-35.Zhang Heng, Yao Pingxi, Duan Shaoshuai, et al. Simulation study of internal flow fluid for the loadsensing counterbalance valve based on fluent［J］. Hydraulics Pneumatics and Seals, 2010(4): 32-35.(in Chinese)［4］陈继文,李志红,杨红娟. 调速阀式旁路节流调速系统动态特性理论及试验研究［J］. 昆明理工大学学报:理工版,2010, 35(2)： 56-60.Chen Jiwen, Li Zhihong, Yang Hongjuan, et al.Theory and experimental research of dynamic characteristics of speed control valve type bypass trimming circuit ［J］. Journal of Kunming University of Science and Technology:Science and Technology, 2010, 35(2)： 56-60.(in Chinese)［5］吴文兵,黄宜坚. 功率谱在调速阀故障诊断中的性能分析［J］. 制造技术与机床,2011(12):198-201.Wu Wenbing, Huang Yijian. The performance analysis of power spectrum in a regulating valve′s fault diagnosis ［J］. Technology ＆ Machine Tool, 2011(12): 198-201.(in Chinese)［6］张宏, 廉自生, 熊晓燕,等. 基于CFD和两相流技术的高水基液压阀结构设计研究\[J\].煤矿机电，2007（5）:1-7.Zhang Hong，Lian Zisheng, Xiong Xiaoyan,et al. Study of high waterbase hydraulic valve based on CFD and BPF technique[J\]. Colliery Mechanical & Electrical Technology,2007（5）:1-7.（in Chinese）［7］李辉, 柯坚, 刘晓红. 基于CFD的液压锥阀结构特性分析\[J\].流体机械,2009,37（9）:33-36.Li Hui, Ke Jian, Li Xiaohong. Analysis of structure characteristics of a hydraulic poppet valve based on CFD[J\]. Fluid Machinery, 2009,37（9）:33-36.（in Chinese）［8］Koskinen K T, Vilenius M J, Virvalo T, et al.Water as apressure medium in position servo systems［C］／／[JP2]Proceedings of the Forth Scandinavian International Conference on Fluid Power, 1995: 859-871.［9］贺小峰,王学兵,嵇碧波.先导式水压溢流阀的设计［J］. 中国机械工程,2005,16(18):1625-1628.He Xiaofeng, Wang Xuebing, Ji Bibo,et al. Design of a two stage relief valve for water hydraulic system ［J］. Chinese Mechanical Engineering, 2005, 16(18)： 1625-1628.(in Chinese)［10 ］孙成通, 韩虎, 曾庆良.基于MATLAB液压系统仿真技术研究\[J\].煤矿机械, 2007,28(7):39-41.Sun Chengtong, Han Hu, Zeng Qingliang. Research on simulation technology of hydraulic system based on MATLAB\[J\].Coal Mine Machinery,2007,28(7):39-41.（in Chinese）［11］王亮, 韩虎, 高洁. 液压系统仿真软件及其应用\[J\].煤矿机械, 2007,28(12):102-104.Wang Liang,Han Hu,Gao Jie. Hydraulic system simulation software and utilization\[J\].Coal Mine Machinery,2007,28(12):102-104.（in Chinese）［12］刘银水, 黄艳, 贺小峰. 水压阀的研究与发展［J］. 液压与气动,2001(5):10-14.Liu Yinshui, Huang Yan, He Xiaofeng, et al. Research and development of water hydraulic valve ［J］. Chinese Hydraulics ＆ Pneumatics, 2001(5): 10-14.（in Chinese)［13］徐礼锋. 一种流量稳定阀的设计［J］.机电工程技术, 2007, 36(4): 74-76.Xu Lifeng. A Type of flow control valve analysis［J］. Mechanical and Electrical Engineering, 2007, 36(4): 74-76.(in Chinese)［14］郭志佳, 刘延斌, 孟文宝,等. 超磁致驱动式流量阀流量特性的数值模拟研究［J］. 重庆邮电大学学报:自然科学版, 2012, 24(4): 512-517.Guo Zhijia, Liu Yanbing, Meng Wenbao, et al. Numerical simulation of the flow characteristic of the giant magnetostrictivedriven flow valve［J］.Journal of Chongqing University of [JP2]Posts and Telecommunications:Natural[JP] Science Edition, 2012, 24(4): 512-517.(in Chinese)［15］Wu D, Burton R, Schoenau G, et al. Analysis of a pressurecompensated flow control valve［J］. Journal of Dynamic Systems,2007, 129(2): 203-211. |
|
|
|
