|
|
Optimal design of double volute splitter in double suction pump |
Xiao Ruofu, Lü Tengfei, Wang Fujun, Liu Zhuqing |
(College of Water Conservancy and Civil Engineering, China Agricultural University, Beijing 100083, China) |
|
|
Abstract The doublevolute was adopted to reduce the radial force that is inherent in singlevolute centrifugal pumps.The hydraulic performance and radial force on the impeller in a doublevolute centrifugal pump were estimated numerically based on a threedimensional,steady and turbulent flow model.Due to the poorly designed splitter,the pump head and efficiency were relatively decreased by 21.8%and 41.3% respectively at the design point,comparing with the pump without splitter in the volute.In order to restore the performance,the splitter was optimized by approach of CFD and orthogonal experimental design techniques.Three factors,including starting circumferential angle and radius as well as length of free part of splitter were involved in the optimization process.The design cases were determined by the orthogonal experiment L4(23) table at the two levels of those factors,subsequently,they were analyzed using a CFD code to obtain their effects on the performance of the pump.The optimum design of splitter was achieved as the result of orthogonal experiment.According to the CFD predictions and testing results of the optimized design,the radial force has been reduced by about half and the hydraulic performance has kept nearly unchanged compared with the pump without splitter in the volute.
|
Received: 14 March 2011
Published: 30 November 2011
|
|
|
|
[1]Hiroyuki O,Toru M,Kenichi M,et al.Magnetically levitated centrifugal blood pump with radically suspended selfbearing motor[C]∥Proceedings of theEighth Interna tion Symposium on Magnetic Bearing,2002. [2]Khalifa A.Experiment and numerical investigation of flow induced vibration in a high pressure double volute centrifugal pump[D].Dhahran:King Fahd University of Petroleum & Minerals,2009. [3]Khalid R.Fullscale investigations of axial force of large centrifugal pumps[J].European Journal of Scientific Research,2010,47(4):586-594. [4]Lobanoff V,Ross R.Centrifugal Pumps Design and Application[M].2nd ed.Houston:Gulf Publishing Company,1996:61-63. [5]Daniel B,Ronald F.Effects of volute design and number of impeller blades on lateral impeller forces and hydraulic performance[J].International Journal of Rotating Machinery,2003,9(2):145-152. [6]刘建瑞,徐永刚,苏起钦,等.基于Fluent的单-双涡室离心泵径向力分析[J].排灌机械,2009,27(2):83-86.Liu Jianrui,Xu Yonggang,Su Qiqin,et al.Analysis of radical force in centrifugal pump with single and double volute based on Fluent[J].Drainage and Irrigation Machinery, 2009,27(2):83-86.(in Chinese) [7]赵万勇,张 亮,雒 军.双吸离心泵径向力数值分析[J].排灌机械,2009,27(4):205-209.Zhao Wanyong,Zhang Liang,Luo Jun.Numerical analysis of radial force in double suction centrifugal pumps[J].Drainage and Irrigation Machinery,2009,27(4):205-209.(in Chinese) [8]杨 敏,阂思明,王福军.双蜗壳泵压力脉动特性及叶轮径向力数值模拟[J].农业机械学报,2009,40(11):83-88.Yang Min,Min Siming,Wang Fujun.Numerical simulation of pressure fluctuation and radial force in a double volute pump[J].Transactions of the Chinese Society for Agricultural Machinery,2009,40(11):83-88.(in Chinese) [9]陈 魁.试验设计与分析[M].北京:清华大学出版社,1996:72-78. [ 10 ]关醒凡.现代泵技术手册[M].北京:宇航出版社,1995:244-246. |
|
|
|