|
|
Hydraulic model and its pilot-plant unit for rear bulb-type cross-flow pump |
GUAN Xing-fan1, SHANG Ming-hua1, XIE Wei-dong2, FENG Xu-song3 |
1.Technical and Research Center of Fluid Machinary Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China; 2.Jiangsu Surveying and Design Institute of Water Resources Co.Ltd., Yangzhou, Jiangsu 225009, China; 3.Jiangsu Water Resources Co.Ltd.of South-to-North Water Transfers Eastern Route Project, Nanjing, Jiangsu 210029, China |
|
|
Abstract According to the pump requirements of middle and low delivery lift and large flow capacity for the first-stage construction in South-to-North Water Transfers Eastern Route Project,and the actual pump characteristics in Jinhu Pump Station,a hydraulic model and its pilot-plant unit for the cross-flow pump were built.The flow field was calculated and analyzed by computational fluid dynamics(CFD) with FLUENT code,and the hydraulic model was optimized by repeated trials in the pilot cross-flow pump.The simulating results calculated by the hydraulic model(named JGZM-3) coincided with the actual results from the pretest in Jiangsu University and the retest in Hohai University.The testing parameters from the pilot cross-flow pump were as follows: delivery lift 2.82 m,flow capacity 342 L/s,power efficiency 79.05%,and cavitation specific speed 1 105.The pilot pump has the characters of large flow capacity and high power efficiency;and its overall performance indexes reach the advanced level,as the foreign made products.Compared with a like vertical axial-flow pump, the pilot cross-flow pump raised the power efficiency over 5% and flow capacity over 10%.
|
Received: 08 August 2013
|
|
|
|
[1] 刘宁,汪易森,张纲.南水北调工程水泵模型同台测试[M].北京:中国水利水电出版社,2006[2] 曾江,李缦."能为南水北调工程做点力所能及的工作是我有生最大的愿望"江苏大学流体机械研究中心关醒凡教授访谈录[J].通用机械,2004(1):8-10[3] ポンプ图集分科会,关醒凡.泵图集[M].北京:机械工业出版社,1976[4] 关醒凡,伍杰,朱泉荣.南水北调东线已招标泵站水泵模型装置试验成果及分析[J].排灌机械,2006,24(1):1-7 |
|
|
|