|
|
Flow mechanism in votex-pump |
ZHAO Wan-yong1, LIU Tian-bao1, 2, LI Yi-song1, ZHANG Liang1, WANG Zhen1 |
1.College of Fluid Power and Control, Lanzhou University of Technology, Lanzhou, Gansu 730050, China; 2.Dongbei Special Steel Group Co.Ltd., Dalian, Liaoning 116031, China |
|
|
Abstract The vortex pump of type 80X-13.5 was numerically simulated. The inner flow model was designed by Pro/E.Separated unstructured hexahedron grid partition and part of boundary condition were used by Gambit.Considering Reynolds Average N-S Equation and standard k-ε turbulence model with SIMPLEC algorithm,numerical simulation for the three-dimensional steady incompressible turbulent flow of the vortex-pump was carried out.The medium is water and the inner flow field of vortex pump is rotating flow with constant angular velocity,three dimensional,and incompressible turbulent flow.The distribution of velocity and total pressure were obtained in numerical simulation.The distribution area of flow are summed up.The circumferential flow is considered as the main flow and can be divided into run-through flow and circulatory flow.The result of numerical simulation testified the validity of the existing model and the new division of flow distribution of the vortex pump typed 80X-13.5.vortex-pump;numerical simulation;flow mechanism;pressure distribution;run-through flow;circulatory flow
|
Received: 08 August 2013
|
|
|
|
[1] 关醒凡.现代泵技术手册[M].北京:宇航出版社,1995:433-442[2] 青木正则.ポルテシクズに关ち研究[J],1984,12(2):48-43[3] 沙毅,杨敏官,康灿.旋流泵特性分析与设计方法探讨[J].农业工程学报,2004,20(1):124-127[4] 陈红勋,陈次昌.旋流泵叶轮内流速场的初步测量[J].排灌机械,1991,9(2):17-19[5] 封俊,李世煌.旋流泵无叶腔内部的有限元分析[J].流体工程,1988,16(11):24-26[6] 施卫东,汪永志,沙毅.旋流泵内部流动的研究[J].农业机械学报,2006,37(1):67-70[7] 沙毅,王劲松,杨敏官.旋流泵内部流动及吸入性能试验研究[J].水泵技术,2003(4):9-12 |
|
|
|