|
|
Influence of Centrifugal Pump Configuration on Axial Travelling of Shaft in Large- and Middle-sized Driving Motor |
ZHAO Wan-yong |
Dept. of Fluid Machinery and Fluid Power Engineering, Gansu University of Technology, Lanzhou, Gansu 730050, China |
|
|
Abstract The abnormal operation of large- and middle-sized driving motor with journal bearings due to excessive temperature rising caused by shaft axial travelling is investigated experimentally on the spot and then analyzed theoretically. It is recognized that such operation results from the bending of pump shaft caused by the radial loads when the motor-driven single volute pump operates beyond designed conditions so that the shaft offset cannot be compensated by means of shaft coupling with nylon pin bolts. It is suggested that the double volute configuration and shaft coupling with elatic ring pin bolts should be adopled for the large-sized centrifugal pumps to avoid the axial travelling of the rotor of the driving motor.
|
Received: 07 August 2013
|
|
|
|
[1] A J斯捷潘诺夫,徐行健.离心泵和轴流泵[M].北京:机械工业出版社,1980:116-146[2] 《机械设计手册》联合编写组.机械设计手册[M].北京:化学工业出版社,1987:1116-1118 |
|
|
|