|
|
Stress analysis of Francis hydraulic turbine runner based on FSI |
Xiao Ruofu1, Zhu Wenruo2, Yang Wei1, Liu Jie3, Wang Fujun1 |
1.College of Water Resources and Civil Engineering, China Agricultural University, Beijing 100083, China; 2.Beijing IWHR Technology Co. Ltd., Beijing 100038, China; 3.Department of Mechanic and Electric, China Three Gorges Corporation, Chengdu, Sicuan 610000, China |
|
|
Abstract To carry out stress characteristics analysis based on two-way FSI, the Navier-Stokes equations and Continuity equation used were transferred to arbitrary Lagrangian-Eulerian(ALE)coordinate system firstly, then were discretized with the special finite volume method adopting flow-condition-based interpolation(FBIC-C). The structure static mechanics equations used were established in rotation coordinate system, and were modeled with the finite element method. The two-way coupling ite-ration method between the fluid equations and the solid finite element equations was used to calculate until the coupling system is convergence. The structure calculation results based on two-way FSI showed that: the equivalent stress and deformation distribution of the runner in one-way and two-way FSI conditions are similar. The locations of maximum stress and deformation are the same. With the increasing of deformation, the relative difference of equivalent stresses gets higher. The highest relative difference values of equivalent stresses and deformations are both occurring at the maximum deformation point. Deformation mainly determines the difference between one-way and two-way FSI results. The one-way FSI is available if accuracy requirement is low at the condition of small deformation.
|
Received: 05 May 2012
|
|
|
|
[1]Jiang Y Y, Yoshimura S, Imai R,et al. Quantitative evaluation of flow-induced structural vibration and noise in turbomachinery by full-scale weakly coupled simulation[J]. Journal of Fluids and Structures, 2007,23(4): 531-544.[2]肖若富,王正伟,罗永要.基于流固耦合的混流式水轮机转轮静应力特性分析[J].水力发电学报,2007,26(3): 14-16. Xiao Ruofu, Wang Zhengwei, Luo Yongyao. Stress analysis of Francis turbine runners based on FSI[J]. Journal of Hydroelectric Engineering, 2007,26(3): 14-16.(in Chinese)[3]罗永要,王正伟,梁权伟.混流式水轮机转轮动载荷作用下的应力特性[J]. 清华大学学报:自然科学版, 2005, 45(2): 235-238. Luo Yongyao, Wang Zhengwei, Liang Quanwei. Stress of Francis turbine runners under fluctuant work conditions[J]. Journal of Tsinghua University:Science & Technology, 2005, 45(2): 110-113.(in Chinese)[4]张立翔,王文全,姚激. 混流式水轮机转轮叶片流激振动分析[J]. 工程力学, 2007, 24(8): 143-150. Zhang Lixiang, Wang Wenquan, Yao Ji. Analysis of flow-induced vibration of blades for a Francis hydro turbine[J]. Engineering Mechanics, 2007, 24(8): 143-150.(in Chinese)[5]Zhang Qun, Toshiaki H. Studies of the strong coupling and weak coupling methods in FSI analysis[J]. International Journal for Numerical Methods in Engineering, 2004,60(12): 2013-2029.[6]Schmucker H, Flemming F, Coulson S. Two-way coupled fluid structure interaction simulation of a propeller turbine[C]//IOP Conference Series: Earth and Environmental Science, 2010: 152-159.[7]王福军. 计算流体动力学分析——CFD软件原理与应用[M]. 北京:清华大学出版社, 2004:119-139.[8]刘小兵,刘德民,曾永忠,等. 基于流固耦合的水轮机振动的数值研究[J].水动力学研究与进展,2008,23(6): 715-722. Liu Xiaobing, Liu Demin, Zeng Yongzhong,et al. Numerical simulation of vibration of hydraulic turbine based on fluid-structure coupling [J]. Chinese Journal of Hydrodynamics, 2008,23(6): 715-722.(in Chinese)[9]赵均海. 强度理论及其工程应用[M]. 北京:科学出版社, 2003.[10]Bathe K J. ADINA Theory and Modeling Guide Volume Ⅲ: ADINA CFD&FSI[M].Watertown:[s.n.], 2010. |
|
|
|