|
|
Radial forces of waterjet propulsion mixedflow pump |
CHENG Li, Bart P.M. van Esch, LIU Chao, ZHOU Ji-Ren, JIN Yan |
(1.College of Hydraulic Science and Engineering, Yangzhou University, Yangzhou, Jiangsu 225009, China; 2. Departrment of Mechanical Engineering, Eindhoven University of Technology, Eindhoven 5600, The Netherlands) |
|
|
Abstract Fluctuations of fluid pressure in hydraulic machinery can cause resonance and fatigue damage of blades. In order to study fluidinduced forces, which are caused by impellerdiffuser interaction, unsteady radial forces due such an effect was conducted in a mixedflow pump with a vaned diffuser by using CFD computation and model experiment. A closedloop test rig was built for the pump and a corotating dynamometer was installed between the impeller and the pump shaft to measure the instantaneous forces and moments on the impeller. The dynamic behavior of the experimental rotorshaft system was determined by carrying out extensive calibrations. The measured forces at the blade passing frequency showed an unexpected dependency on flow rate. Another important observation was that the blade excitation forces cause the impeller to whirl in the direction opposite to shaft rotation. The computed global characteristics and the magnitude of blade interaction forces showed good agreement with measurements, respectively. The measured results were compared with the unsteady ones estimated by using CFD codeFluent. Over a large range of flow rates, the trend of force variation agrees well with the measurements. The reasons for deviation of prediction from experiment were explained.
|
Received: 10 January 2012
Published: 30 November 2012
|
|
|
|
[1]Yoshida Y, Tsujimoto Y, Yokoyama D, et al. Rotordynamic fluid force moments on an opentype centrifugal compressor impeller in precessing motion[J]. International Journal of Rotating Machinery, 2001,7(4): 237-251.[2]Yoshida Y, Tsujimoto Y, Morimoto G, et al. Effects of seal geometry on dynamic impeller fluid forces and moments [J]. Journal of Fluids Engineering, 2003,125(5):786-795.[3]Suzuki T, Prunieres R, Horiguchi H, et al. Measurements of rotordynamic forces on an artificial heart pump impeller[J]. Journal of Fluids Engineering, 2007,129(11): 1422-1427.[4]Rodriquez C G, Egusquiza E, Santos I F. Frequencies in the vibration induced by the rotor stator interaction in a centrifugal pump turbine[J]. Journal of Fluids Engineering, 2007,129(11): 1428-1435.[5]Bulten N W H, Van Esch B P M. Fully transient CFD analyses of waterjet pumps[J]. Marine Technology, 2007,44(3): 185-193.[6]肖若富,吕腾飞,王福军. 双蜗壳式双吸泵隔板结构对叶轮径向力的影响[J]. 农业机械学报,2011,42(9):85-88.Xiao Ruofu,Lü Tengfei,Wang Fujun. Influence of rib structure in doublevolute centrifugal pumps on the impeller radial force[J]. Transactions of the Chinese Society for Agricultural Machinery, 2011,42(9):85-88. (in Chinese)[7]Jerry B, Acosta A J, Brennen C E, et al. Forces on centrifugal pump impellers[C]//Proceedings of the 2nd International Pump Symposium, 1985.[8]Yang Jing, Zhou Lingjiu, Wang Zhengwei. Numerical simulation of threedimensional cavitation around a hydrofoil[J]. Journal of Fluids Engineering, 2011,133(8): 11-19.[9]Van Esch B P M. Performance and radial loading of a mixedflow pump under nonuniform suction flow[J]. Journal of Fluids Engineering, 2009,131(5):1-7.[10]Kawata Y, Kanki H, Kawakami T. The dynamic radial force on the cavitating centrifugal impeller [C]//Proceedings of the 12th IAHR Symposium on Hydraulic Machinery in Energyrelated Industries, 1984:305-313. |
|
|
|