|
|
|
| Multioperatingcondition design of centrifugal pump with medium specific speed |
| YUAN Shou-Qi, HU Bo, LU Wei-Gang, LI Tong, HUANG Zhi-Pan |
| (Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang, Jiangsu 212013, China) |
|
|
|
|
Abstract In order to allow the hydraulic performance of type TS65-40-125 centrifugal pump with a medium specific speed to satisfy multioperatingcondition simultaneously, its impeller was redesigned three times by means of the enlarged design flow rate method. A structure grid was generated in Ansys Workbench 12 and the grid sizeindependence was analyzed. The pressure, turbulence kinetic energy, velocity distributions in those impellers and the overall performance curves were obtained with the commercial software CFX. Finally, one optimal impeller was identified and experiments were made against it. It can be concluded that the properly selected geometry parameters of the impeller can effectively improve head and efficiency of the centrifugal pump with medium specific speed and expand the high efficiency zone by using the enlarge design flow rate method. The head of the redesigned pump was improved as high as 5 m compared with the original one at the design point and the efficiency at five operating points basically met the specifications in the related national pump standard of China. Some references are provided for the multioperatingcondition design of centrifugal pump with medium specific speed.
|
|
Received: 09 February 2012
Published: 30 September 2012
|
|
|
|
| 1］黎义斌, 王洋. 无过载超低比转数离心泵改型设计［J］. 排灌机械,2006,24(2):7-10.Li Yibin, Wang Yang. Improved design of nonoverload superlow specific speed centrifugal pump［J］. Drainage and Irrigation Machinery, 2006,24(2):7-10. (in Chinese)［2］袁寿其. 低比转速离心泵理论与设计［M］. 北京:机械工业出版社,1997.［3］潘中永,谢蓉,曹英杰,等. 叶片安放角变化规律对离心泵性能影响分析［J］. 排灌机械,2009,27(5):319-322.Pan Zhongyong,Xie Rong,Cao Yingjie,et al. Analysis effects of blade angle on centrifugal pump performance［J］.Drainage and Irrigation Machinery, 2009,27(5):319-322. (in Chinese)［4］谭磊,曹树良. 中比转数离心泵叶轮的优化设计及数值模拟［J］. 排灌机械工程学报,2010,28 (4):282-290.Tan Lei,Cao Shuliang. Optimal design and numerical simulation for impeller of centrifugal pump with mediumhigh specific speed［J］. Journal of Drainage and Irrigation Machinery Engineering, 2010,28 (4):282-290. (in Chinese)［5］Jafarzadeh B,Hajari A,Alishahi M M,et al. The flow simulation of a lowspecificspeed highspeed centrifugal pump［J］. Applied Mathematical Modelling,2011,35:242-249.［6］关醒凡,陆伟刚,魏光新. 全扬程泵理论与设计实践［J］. 水泵技术,1995(2):9-11.Guan Xingfan,Lu Weigang,Wei Guangxin. The theory and design of nonoverload centrifugal pumps［J］. Pump Technology,1995(2):9-11. (in Chinese)［7］陈金玉,杨来侠. 基于Ansys Workbench手机外壳有限元网格划分研究［J］. 现代制造技术与装备,2008,182(1):58-60.Chen Jinyu,Yang Laixia. The research on finite element mesh for cellphone shell based on Ansys Workbench［J］. Modern Manufacturing Technology and Equipment,2008,182(1):58-60. (in Chinese)［8］周水清,孔繁余,王志强，等. 基于结构化网格的低比转数离心泵性能数值模拟［J］. 农业机械学报,2011,42(7):66-69.Zhou Shuiqing,Kong Fanyu,Wang Zhiqiang,et al. Numerical simulation for low specificspeed centrifugal pump with structured grid［J］. Transactions of the Chinese Society for Agricultural Machinery,2011,42(7):66-69. (in Chinese)［9］施卫东,张华,陈斌,等. 不同叶顶间隙下的轴流泵内部流场数值计算［J］. 排灌机械工程学报,2010,28 (5):374-377.Shi Weidong,Zhang Hua,Chen Bin,et al. Numerical simulation of internal flow field in axialflow pump with different blade tip clearance sizes［J］. Journal of Drainage and Irrigation Machinery Engineering,2010,28 (5):374-377. (in Chinese)［10］王福军. 计算流体动力学分析——CFD软件原理与应用［M］. 北京:清华大学出版社,2004. |
|
|
|
