高剪切匀浆泵两相流动的数值模拟

doi:10.3969/j.issn.1674-8530.2012.04.007

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (3067 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to study the mixing effect of flow and analyze the flow pattern as well as the velocity characteristics in high shear pulp pump, a geometrical hydraulic model of a high shear pulp pumps was established by Pro/E, and solidliquid twophase flow in it was simulated by using the CFD method based on the mixture model, standard k-ε turbulence model and SIMPLEC algorithm. The meshindependence check was conducted to reduce the influence of mesh size on the results.A series of CFD numerical simulations were carried out under different discharges and rotational speeds, respectively, and the results were compared among the cases to identify their influence on the flow field in the pump. The results show that the mixing uniformity of two phases was improved considerably after the solid phase was sheared in the shearing chamber, suggesting the shear pulp pump exhibited a better mixing and homogenizing effect for the solid phase in flow. The rate of two phases mixing becomes slow when the discharge is increased, and the mixing rate and uniformity of two phases are improved when the rotational speed increases.Note that the mixing rate and uniformity of two phases in the impeller but those in the inlet to the impeller are affected in a great deal by a change in the rotational speed.

Key words： high shear pulp pump；twophase flow shearing and mixing；computaional fluid dynamics；numerical simulation

Received: 03 June 2011 Published: 30 July 2012

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YE Xiao-Yan
	TIAN Ying-Ying
	DING Ya-Na
	SHEN Liang-Bin
	ZHU Li-Kai

Cite this article:

YE Xiao-Yan,TIAN Ying-Ying,DING Ya-Na等. Numerical simulation of twophase flow in high shear pulp pump[J]. Journal of Drainage and Irrigation Machinery Engin, 2012, 30(4): 407-411.

URL:

http://zzs.ujs.edu.cn/pgjx/EN/10.3969/j.issn.1674-8530.2012.04.007 OR http://zzs.ujs.edu.cn/pgjx/EN/Y2012/V30/I4/407

［1］Chitu T M, Oulahna D, Hemati M. Wet granulation in laboratoryscale high shear mixers: Effect of chopper presence, design and impeller speed［J］. Powder Technology, 2011,206（1/2）: 34-43.［2］Bukovec P, Kroselj V, Turk S,et al. Optimization of melt pelletization in a high shear mixer［J］. International Journal of Pharmaceutics, 2009,381（2）: 192-198.

［3］王春林,张裕中.安装位置对高剪切混合器流体力学性能的影响［J］.食品与机械,2010,26(5):98-101.

Wang Chunlin, Zhang Yuzhong. Effect of high shear mixer locations on the flow pattern and energy dissipation［J］.Food and Machinery, 2010, 26(5):98-101.(in Chinese)

［4］浦广益,宋广雷,张裕中.高剪切均质机内部三维流场分析［J］.轻工机械,2010,28(1):28-31.

Pu Guangyi, Song Guanglei, Zhang Yuzhong. Internal 3D flow field analysis of high shear homogenizer［J］. Light Industry Machinery, 2010, 28(1): 28-31.(in Chinese)

［5］周富强,周蕾蕾. 连续式高剪切均质机结构机理流场及功率研究［J］. 食品与机械,2009,25(1):97-100.

Zhou Fuqiang, Zhou Leilei. Study on structure mechanism, flow field and power for continuous high shear homogenizer［J］. Food and Machinery, 2009, 25(1):97-100.(in Chinese)

［6］Khopkar A R, Tanguy P A. CFD simulation of gasliquid flows in stirred vessel equipped with dual rushton turbines: Influence of paralle, imerging and diverging flow configurations［J］. Chemical Engineering Science, 2008,63 (14): 3810-3820.

［7］刘建瑞,苏起钦.自吸泵气液两相流数值模拟分析［J］.农业机械学报, 2009, 40(9): 73-76.

Liu Jianrui, Su Qiqin. Numerical simulation on gasliquid twophase flow in selfpriming pump［J］. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(9):73-76.(in Chinese)

［8］Kumar S, Bergada J M, Watton J. Axial piston pump grooved slipper analysis by CFD simulation of threedimensional N-S equation in cylindrical coordinates［J］. Computers and Fluids, 2009, 38(3):648-663.