|
|
Calculation and Prevention for Water Hammer in Water Intake Project of Huizhou Shennengyuan Fengda Electric Power Plant |
JIANG Gui-lin1, ZHOU Long-cai2, FENG Jun1, LI Kang-bo1 |
1. Huayu Water Resources and Hydropower Surveying and Design CO. LTD, Huizhou, 516001, Guangzhou Province, China 2. Key Laboratory of Water Resource and Hydropower Engineering Science, Wuhan University, Wuhan, 430072, China |
|
|
Abstract The water hammer in water intake project of Fengda electric power plant is calculated by themethod of characteristic line. As the GRP sand inclusion steel pipes with low elastic modulus are adopted, andthe water treatment mixing screw set at the end of pipeline wears down a part of water hammer energy, so getlow positive water hammer pressure in the water supply system. But high negative pressure is likely to happenat the both ends of the pipeline in case of a serious pump-stopping water hammer. The results show that it iseffective to prevent the negative water hammer pressure by setting three one-way surge tanks in pipeline.
|
Received: 08 August 2013
|
|
|
|
[1] 刘竹溪,刘光临.泵站水锤及其防护[M].北京:水利电力出版社,1988[2] E B 怀利,V.L斯特里特,清华大学流体传动与控制教研组.瞬变流[M].北京:水利电力出版社,1983[3] .GB/T50265-1997.泵站设计规范[S],1997-9-1[4] 日本农业土木事业协会,丘传忻,林中卉.泵站工程技术手册[M].北京:中国农业出版社,1988 |
|
|
|