|
|
ZHANG Jing1, TAN Minggao1, LIU Houlin1, WU Xianfang2, HE Naichang1 |
|
[1]关醒凡.现代泵理论与设计[M].北京:中国宇航出版社,2011.[2]施卫东,张华,陈斌,等.不同叶顶间隙下的轴流泵内部流场数值计算[J].排灌机械工程学报,2010,28(5):374-377. SHI Weidong,ZHANG Hua,CHEN Bing,et al.Numerical simulation of internal flow field in axial-flow pump with different blade tip clearance sizes[J].Journal of drainage and irrigation machinery engineering,2010,28(5):374-377.(in Chinese)[3]MATTHIAS S,REZA S A.Clearance effects on the evolution of the flow in the vaneless diffuser of a centrifugal compressor at part load condition[J].Journal of turbomachinery,2008,130:1-9.[4]李振华, 孙玉莹, 李云,等. 不同流量系数下叶顶间隙对离心压缩机模型级性能的影响[J]. 流体机械, 2015,43(10):31-36. LI Zhenhua,SUN Yuying,LI Yun, et al. Study on influence of tip clearance on performance of centrifugal compressor models with different flow coefficients[J].Fluid machinery,2015,43(10):31-36.(in Chinese)[5]李仁年,韩伟,李琪飞,等.间隙对螺旋离心泵性能影响的预测及试验[J].农业机械学报,2007,38(6):79-81. LI Rennian,HAN Wei,LI Qifei,et al. Prediction and experiment about the effect of clearance on performance of screw centrifugal pump [J].Transactions of the CSAM,2007,38(6):79-81.(in Chinese)[6]HOWARD J H G, ABRAMIAN M, HERMAN P. Volute pump of very low specific speed[C].Proceedings of the 1987 ASME-JSME Thermal Engineering Joint Conference,New York: ASME, 2000,2:51-61.[7]PRASAD A, WAGNER J H. Unsteady effects in turbine tip clearance flows[J]. Journal of turbomachinery, 2000, 122(4):621-627.[8]赵伟国,邬国秀,黎义斌,等.口环间隙变化对离心泵性能的影响研究[J].水力发电学报,2014,33(5):211-215. ZHAO Weiguo,WU Guoxiu,LI Yibin,et al.Effect of the clearance of wear-rings on the centrifugal pump perfor-mance[J].Journal of hydroelectric engineering,2014,33(5):211-215.(in Chinese)[9]陈鱼,费振桃,蔡永雄,等.输送清水时口环间隙对离心油泵性能的影响[J].流体机械,2006,34(1):1-5. CHEN Yu,FEI Zhentao,CAI Yongxiong,et al. Effect of the clearance of wear-rings on the performance of centri-fugal oil pump while handling water[J].Fluid machinery, 2006, 34(1):1-5.(in Chinese)[10]李文广,费振桃,蔡永雄.离心油泵叶轮口环间隙对性能的影响[J].水泵技术,2004(5):7-13. LI Wenguang,FEI Zhentao,CAI Yongxiong. Effect of the clearance of wear-rings on the performance of centri-fugal oil pump[J].Pump technology,2004(5):7-13.(in Chinese)[11]LOMAKIN A.A. Calculation of critical speed and securing of dynamic stability of hydraulic high-pressure pumps with reference to the forces arising in the gap seals[J].Energy of machinery,1962,14(1):1158-1170.[12]AYAD A F, ABDALLA H M, ALY E A. Effect of semi-open impeller side clearance on the centrifugal pump performance using CFD[J]. Aerospace science & technology, 2015, 47:247-255.[13]王洋,张翔.叶轮口环间隙对低比转速离心泵效率的影响[J].排灌机械工程学报,2008,26(6):27-30. WANG Yang,ZHANG Xiang. Effect of clearance of impeller wear-rings on efficiency of low specific speed centrifugal pump[J].Journal of drainage and irrigation machinery engineering,2008,26(6):27-30.(in Chinese)[14]张杰, 赵波, 李金国. 基于 CFD 的汽车水泵数值模拟与试验验证[J]. 流体机械, 2016, 44(11):6-10. ZHANG Jie,ZHAO Bo,LI Jinguo. Numerical simulation and test verification of automotive water pump based on CFD [J].Fluid machinery, 2016, 44(11):6-10.(in Chinese) |
|
|
|