|
|
|
| Reciprocating pump seals design based on frictional temperature verification |
| Zeng Shengqu1,2, Chen Fujiang3, Zhou Huamin2 |
| 1.Sany Heavy Industry Concrete Pump Institute, Changsha, Hunan 410100, China; 2.School of Material Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei 430074, China; 3.School of Petroleum Engineering, Changzhou University, Changzhou, Jiangsu 213016, China |
|
|
|
|
Abstract To avoid the seals failure due to the increasing temperature caused by the friction motion in medium or high pressure reciprocating pump, it is necessary to consider the frictional temperature in the design of seals to ensure that the highest temperature on the friction interface is not greater than the allowable temperature of seal material. The maximum temperature on the interface by the friction motion is mainly influenced by the surrounding temperature, the frictional temperature of contact body, and the frictional temperature rise on the interface between contact bodies. The formula of frictional seals′ temperature for reciprocating pump is derived. And a concise formula of the increasing temperature on the frictional interface is proposed for designing and checking the seals for the reciprocating pump, which is based on the classical analytic computational formula of friction surface temperature. The feasibility of the proposed concise formula is validated by the comparison of calculation and experimental results. Results in present work would provide the reference for choosing and designing of seals in reciprocating motion from the view of the frictional temperature.
|
|
Received: 29 May 2014
|
|
|
|
| [1]Blok H. Theoretical study of temperature rise at surfaces of actual contact under oiliness lubricating conditions[C]//Proceedings of General Discussion on Lubrication and Lubricants.London:IMechE,1937,2:222-235.[2]Blok H. The flash temperature concept[J]. Wear, 1963, 6(6):483-494.[3]Jaeger J C. Moving sources of heat and the temperature at sliding contacts[C]//Proceedings of the Royal Society.New South Wales:[s.n.], 1942,76:203-224.[4]Archard J F. The temperature of rubbing surfaces[J]. Wear, 1959, 2(6):438-455.[5]Tian X, Kennedy F E. Maximum and average flash temperature in sliding contacts[J]. Journal of Tribology, 1994, 116(1):167-174.[6]Laraqi N, Alilat N, de Maria J M, et al. Temperature and division of heat in a pin-on-disc frictional device-exact analytical solution[J]. Wear, 2009, 266(7): 765-770.[7]Rowe K G, Bennett A I, Krick B A, et al. In situ thermal measurements of sliding contacts[J]. Tribology international, 2013, 62:208-214.[8]彭旭东,董光能,谢友柏. 静止销和旋转圆盘间的稳态温度新算法[J]. 润滑与密封,1999(2):66-68. Peng Xudong, Dong Guangneng, Xie Youbai. A new calculation method for steady-state temperature between a stationary pin and a rotating disc[J].Lubrication Engineering, 1999(2):66-68.(in Chinese)[9]Stachowiak G W,Batchelor A W. Engineering Tribology [M]. Boston:Butterworth-Heinemann,2010.[10]Bharat Bhushan. Introduction to Tribology [M]. 葛世荣,译. 北京:机械工业出版社,2007.[11]温诗铸. 摩擦学原理[M]. 北京:清华大学出版社, 1990.[12]苏亚欣. 传热学[M]. 武汉:华中科技大学出版社, 2009.[13]金晓行, 刘小君, 王伟, 等. 摩擦制动器温度场的研究现状和展望[J]. 合肥工业大学学报:自然科学版,2007,30(7):801-804. Jin Xiaoxing, Liu Xiaojun, Wang Wei, et al. Development of researches on the temperature field of frictional brakes[J]. Journal of Hefei University of Technology:Natural Science, 2007,30(7):801-804.(in Chinese)[14]熊佳, 雷玉勇, 杨志峰, 等. 基于ANSYS的高压机械密封温度场理论研究[J]. 润滑与密封, 2007,32(4):123-126. Xiong Jia, LeiYuyong, Yang Zhifeng, et al. Study on temperature fields of mechanical seal based on ANSYS[J]. Lubrication Engineering, 2007,32(4):123-126.(in Chinese) |
|
|
|
