|
|
Performance optimization of low-specific speed centrifugal pump under variable operation conditions |
Bu Xuebing, Chen Hui, Li Yongpeng, Wang Wenting |
Xi′an Aerospace Propulsion Institute, Xi′an, Shaanxi 710100, China |
|
|
Abstract In order to improve the overall efficiency of a low specific speed centrifugal pump at multi-operation point, the hydraulic performance of such a pump is optimized numerically across a flow rate ratio of 8(the maximum flow rate to the minimum one)by making use of a global optimization algorithm based on Latin hypercube sampling and simulated annealing algorithm. Three optimization schemes are exploited, i.e. impeller optimization, volute optimization, and overall(impeller plus volute)optimization. It is shown that the efficiency of the optimized pumps becomes better in all the optimization schemes. The efficiency of the optimized pump in the volute optimization scheme is quit close to that in the overall optimization. However, the improvement of efficiency in the impeller optimization scheme is less than that in the other schemes. Thus, when a centrifugal pump with low specific speed is optimized at variable operation points, the first priority is to conduct a volute optimization. Moreover, in order to improve the overall efficiency of a centrifugal pump at multi-operation point, the design flow rate should be slightly lower than the maximum operation flow rate.
|
Received: 06 November 2013
|
|
|
|
[1]朱祖超. 低比转数高速离心泵的理论及设计应用[M]. 北京: 机械工业出版社, 2008.[2]齐学义, 刘永明. 胡家旺,等. 提高超低比转数离心泵效率的方法[J]. 水电能源科学, 2011,29(2):118-120. Qi Xueyi,Liu Yongming,Hu Jiawang, et al. Method of improving efficiency of low specific speed centrifugal pump[J]. Water Resources and Power, 2011,29(2):118-120.(in chinese)[3]Hideshi Kagawa, Akira Okayasu, Toyohiko Ota. Improvement on the low ns high-pressure pump[J]. AIAA Journal, 2009:4957.[4]Junichi Kurokawa, Takeshi Yamada, Hiroshi Hiraga. Performance of low specific speed pumps[C]//Proceedings of the 11th Australasian Fluid Mechanics Conference. Hobart,Australia: University of Tasmania, 1992.[5]邓文剑, 楚武利. 叶轮和蜗壳匹配关系对离心泵性能影响的研究[J]. 石油机械,2008, 36(3): 9-12. Deng Wenjian, Chu Wuli. The effect of matching between impeller and volute to performance of centrifugal pump[J]. China Petroleum Machinery, 2008,36(3):9-12.(in Chinese)[6]袁寿其, 胡博, 陆伟刚, 等. 中比转数离心泵多工况设计[J]. 排灌机械工程学报, 2012,30(5):497-502. Yuan Shouqi, Hu Bo, Lu Weigang, et al. Multi-operating-condition design of centrifugal pump with medium specific speed[J]. Journal of Drainage and Irrigation Machinery Engineering, 2012,30(5):497-502.(in Chinese)[7]Joseph P V. Centrifugal and axial pump design and off-design performance prediction[R]. Washington D.C.,USA:NASA Technical Memorandum,106745.[8]Massinissa Djerroud, Guyh Ngoma, Walid Ghie. Numerical identification of key design parameters enhancing the centrifugal pump performance: Impeller, impeller-volute, and impeller-diffuser[C]//Proceedings of the ISRN Mechanical Engineering,2011: 794341.[9]袁寿其, 付强, 朱荣生. 核电站离心式上充泵多工况水力设计[J]. 排灌机械工程学报, 2010,28(3):185-189. Yuan Shouqi, Fu Qiang, Zhu Rongsheng. Multi-operating-condition hydraulic design of centrifugal pump for nuclear power plant[J]. Journal of Drainage and Irrigation Machinery Engineering, 2010,28(3):185-189.(in Chinese)[10]胡苑, 赖喜德, 符杰,等. 基于数值模拟和性能预测方法的主油泵改型优化[J]. 流体机械, 2009,37(4): 38-42. Hu Yuan, Lai Xide,Fu Jie,et al. Retrofit and optimization design of main oil pump by numerical simulation and performance estimation[J]. Fluid Machinery, 2009,37(4):38-42.(in Chinese)[11]张伟. 叶片泵非设计工况叶轮内部流动分析和预测[D]. 上海:上海大学上海市应用数学和力学研究所,2010.[12]张伟, 余运超, 陈红勋. 离心泵叶轮非设计工况下内部湍流流场的模拟[J]. 排灌机械工程学报, 2010,28(3): 38-42. Zhang Wei, Yu Yunchao, Chen Hongxun. Numerical simulation of flow in centrifugal pump impeller at off-design conditions[J]. Journal of Drainage and Irrigation Machinery Engineering, 2010, 28(1):38-42.(in Chinese)[13]谈明高. 离心泵能量性能预测的研究[D]. 镇江:江苏大学流体机械工程技术研究中心,2008.[14]Shusaku Kagawa, Junichi Kurokawa, Jun Matsui,et al. Performance of very low specific speed centrifugal pumps with circular casing[J]. Journal of Fluid Science and Technology, 2007, 2(1): 130-138.[15]李世煌. 叶片泵的非设计工况及其优化设计[M]. 北京: 机械工业出版社,2006. |
|
|
|