Abstract:In order to solve the problems in the design optimization of automobile cooling water pump impeller, such as long design cycle and unclear optimization method, a design and optimization method of semi-open impeller at rated operating condition was proposed based on the theory of centrifugal pump design and computational fluid mechanics dynamics(CFD). Firstly, the structural parameters of the impeller were determined, and the water pump was preliminarily modeled by the 3D modeling software CATIA V5. The design model was simulated and analyzed by using the CFD software STARCCM+, and the absolute pressure cloud diagram, velocity vector diagram and turbulent kinetic energy distribution diagram of the pump section were obtained. Finally, the main structural parameters of the impeller, such as inlet and outlet width, inlet and outlet diameter, inlet and outlet angle, were optimized by MATLAB genetic algorithm toolbox with the aim of minimizing the total energy loss of the pump. The results of the study show that MATLAB genetic algorithm toolbox plays a significant role in the process of pump optimization through the simulation comparison of the cooling water pump before and after optimization under multiple operating conditions. In addition, MATLAB genetic algorithm toolbox has obvious advantages in finding the optimization combination of impeller structural parameters, and the results are reasonable and reliable. The pump performance after impeller optimization is excellent, and the pump efficiency has been increased by 2.3% at rated operating conditions.
雷刚*,徐雪汉,谭巍,杨联林,王虎银. 基于STARCCM+的离心式冷却水泵叶轮优化设计[J]. 排灌机械工程学报, 2022, 40(9): 874-879.
LEI Gang*,XU Xuehan,TAN Wei,YANG Lianlin,WANG Huyin. Optimization design of centrifugal cooling water pump impeller based on STARCCM+. Journal of Drainage and Irrigation Machinery Engin, 2022, 40(9): 874-879.