Analysis on steady fluid dynamics of cylindrical gas seal by CFD
SUN Junfeng1, LIU Meihong1, LI Yuxian1, SU Zehui2, KANG Yuchi1
1.Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming, Yunan 650504, China; 2.Lanshi Energy Equipment Engineering Institute, Lanzhou, Gansu 730050, China
Abstract:In order to explore the effect of groove structure on the sealing performance of a new type cylindrical gas seal, in the paper, the static pressure distribution, fluid velocity distribution and gas shear stress distribution in the sealing film are analyzed and compared between two structures by using the CFD software. The two structures include ordinary flat and T-groove floating rings. The results demonstrate that a large film pressure variation is found in the circumferential direction in the ordinary flat floating ring seal, specially, the highest pressure is in the area with the minimum film thickness or vice versa because of the fluid hydrodynamic effect generated by the eccentric rotation of the ring. For the T-groove floating ring, a large film pressure is in the groove and its root, and the maximum pressure is higher than in the ordinary floating ring film. Because every groove can produce a hydrodynamic effect, the film pressure not only exhibits several peaks in the circumferential direction, but the number of pressure peaks is equal to the number of grooves. Compared with the ordinary floating ring, the fluid velocity in the T-groove floating ring film is larger than in the ordinary flat ring film due to even strong hydrodynamic effect generated by the grooves. The maximum shear stress occurs in the range with the minimum film thickness in the ordinary flat ring film, in the T-groove ring film, however, the maximum shear stress is located at the minimum film thickness and in the dam area of groove root; further its value is larger than the former.
孙军锋, 刘美红, 李遇贤, 苏泽辉, 康宇驰. 基于CFD柱面气膜密封静态力学性能分析[J]. 排灌机械工程学报, 2017, 35(11): 968-974.
SUN Junfeng, LIU Meihong, LI Yuxian, SU Zehui, KANG Yuchi. Analysis on steady fluid dynamics of cylindrical gas seal by CFD. Journal of Drainage and Irrigation Machinery Engin, 2017, 35(11): 968-974.
[1]马纲,沈心敏.先进气膜密封技术研究进展与分析[J].航空制造技术,2009(3):58-61. MA Gang, SHEN Xinmin. Development and analysis of advanced gas film sealing technology[J].Aeronautical manufacturing gechnology,2009(3):58-61.(in Chinese)[2]NAKANE H, MAEKAWA A, AKITA E, et al. The development of high performance leaf seals[J]. J. eng. gas turbines power,2004,126(2): 342-350.[3]苏泽辉,刘美红. 柱面气膜密封性能的CFD数值分析[J].润滑与密封,2016,41(9): 49-53. SU Zehui, LIU Meihong.CFD numerical simulation of cylinder gas film seal properties[J].Lubrication engineering,2016,41(9): 49-53.(in Chinese)[4]刘蕴,殷国富,杜建媛,等. 螺旋槽型干气密封系统轴向振动影响因素研究[J]. 四川大学学报(工程科学版), 2016,48(S2): 155-160. LIU Yun, YIN Guofu, DU Jianyuan, et al. Research of axial vibration of dry gas seal system with spiral groove [J]. Journal of Sichuan University(engineering science edition), 2016,48(S2): 155-160.(in Chinese)[5]马纲,孙晓军,罗先海,等.端柱面组合密封气膜稳态特性数值仿真分析[J].北京航空航天大学学报,2014,40(4):439-443. MA Gang, SUN Xiaojun, LUO Xianhai, et al. Numerical simulation analysis of steady-state properties of gas face and cylinder film seal [J]. Journal of Beijing University of Aeronautics and Astronautics,2014,40(4):439-443.(in Chinese)[6]陈源,彭旭东,江锦波,等. 密封环挠性安装形式对干气密封动态追随性的影响分析[J]. 摩擦学报, 2017,37(2): 139-147. CHEN Yuan, PENG Xudong, JIANG Jinbo, et al. The influence of flexibly mounted ways of seal rings on dynamic tracking of dry gas seal [J]. Tribology, 2017,37(2): 139-147.(in Chinese)[7]马纲,栗绣花,沈心敏,等.柱面气膜密封界面结构与性能分析[J].航空动力学报,2011, 26(11):2610-2616. MA Gang, LI Xiuhua, SHEN Xinmin, et al. Analysis of performance and interface structure of cylinder gas film seal [J]. Journal of aerospace power, 2011, 26(11): 2610-2616.(in Chinese)[8]马纲,孙晓军,何军,等.端柱面组合密封气膜密封参数化建模仿真分析[J].润滑与密封,2013,38(7):8-11. MA Gang, SUN Xiaojun, HE Jun, et al. Simulation analysis of gas face and cylinder film seal by parametric modeling [J]. Lubrication engineering, 2013,38(7): 8-11.(in Chinese)[9]STEINETZ B M, HENDRICKS R C. Engine seal technology requirements to meet NASA′s advanced subsonic technology program goals[J]. Journal of propulsion and power, 1994, 12(4):786-793.[10]TIBOS S, TEIXEIRA J A, GEORGAKIS C. Investigation of effective groove types for a film riding seal[J]. Journal of engineering for gas turbines & power, 2017,139(7):072503.[11]ATHAVALE M M, HO Y H, PREZEKWAS A J. Analysis of coupled seals, secondary and powerstream flow fields in aircraft and aerospace turbomachines[J]. Revista médica de chile, 2005, 131(10): 1-6.[12]MUNSON J, STEINETZ B M. Specific fuel consumption and increased performance benefits possible with advanced seal technology[C]//Proceedings of the Joint Propulsion Conference and Exhibit,2013.[13]陈汇龙, 刘志斌, 刘彤,等. 基于空化的机械密封槽腔耦合方式研究[J]. 江苏大学学报(自然科学版), 2015, 36(1):43-47. CHEN Huilong, LIU Zhibin, LIU Tong, et al.Research on coupling style of mechanical seal with spiral groove and micro-pores based on cavitation[J]. Journal of Jiangsu University(natural science edition), 2015, 36(1):43-47.(in Chinese)[14]胡松涛, 黄伟峰, 刘向锋,等. 螺旋槽干气密封压差扰动下的瞬态特性研究[J]. 流体机械, 2017, 45(2):22-27. HU Songtao, HUANG Weifeng, LIU Xiangfeng,et al. Transient response analysis of spiral groove gas face seals under pressure-drop fluctuation [J]. Fluid machinery, 2017, 45(2):22-27.(in Chinese)