Study on numerical method for roof mounted wind turbine micrositing based on U-ABL
Wang Qiang1, Wang Jianwen1,2, Hou Yali1,2, Luo Kun1,2, Gao Zhiying1,2
1.School of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot, Inner Mongolia 010051, China; 2.Key Laboratory of Wind and Solar Power Energy Utilization Technology Ministry of Education and Inner Mongolia Construction, Hohhot, Inner Mongolia 010051, China
Abstract:Based on project IEA Task 27- study on numerical method for wind turbines micrositing on top of buildings in complex urban building environment, the urban atmospheric boundary layer(U-ABL)is involved, and a new CFD numerical analysis method is explored for micrositing of small building-mounted wind turbines. In the method, the wind turbulent characteristics are analyzed by using U-ABL, consequently, more accurate and suitable inflow condition is established for the urban building environment. By making use of this method, a building in southern suburb in Hohhot city is modelled in CFD and a suitable inflow condition is included by UDF. Then, the turbulent characteristic parameters such as turbulent intensity, wind acceleration factor, average turbulent boundary layer thickness and ideal power amplifying factor in the vertical direction above the building are predicted and analyzed. The results turn out that the optimum installation location is at the leading edge of the building for a horizontal axis wind turbines and the turbines should be above the building as high as 1.50 times the building height. The case has confirmed the feasibility of the new numerical method, and provides a new idea for analyzing the wind turbulent characteristics. Meanwhile, the method also has theoretical and practical significance for small building-mounted wind turbines micrositing.
王强, 汪建文,, 侯亚丽,, 罗坤,, 高志鹰,. 基于U-ABL理论屋顶风力机微观选址数值方法探究[J]. 排灌机械工程学报, 2015, 33(9): 773-778.
Wang Qiang, Wang Jianwen,, Hou Yali,, Luo Kun,, Gao Zhiying,. Study on numerical method for roof mounted wind turbine micrositing based on U-ABL. Journal of Drainage and Irrigation Machinery Engin, 2015, 33(9): 773-778.
[1]Ledo L, Kosaskh P B, Cooper P. Roof mounting site analysis for micro-wind turbines[J]. Renewable Energy, 2011, 36(12): 1379-1391.[2]Tabrizia B A, Whale J, Lyons T,et al. Performance and safety of rooftop wind turbines:Use of CFD to gain insight into inflow conditions[J]. Renewable Energy, 2014, 67(7): 242-251.[3]许昌, 杨建川, 李辰奇, 等. 复杂地形风电场微观选址优化[J]. 中国机电工程学报, 2013, 33(31): 58-64. Xu Chang, Yang Jianchuan, Li Chenqi, et al. Optimization of wind farm layout in complex terrain[J]. Proceedings of the CSEE. 2013, 33(31): 58-64.(in Chinese)[4]Burton T, Sharpe D, Jenkins N, et al. Wind Energy Handbook[M]. United Kingdom: Wiley, 2001:9-36.[5]孟昌波. 风资源评估改进方法的研究[D].北京:清华大学土木水利学院, 2008.[6]Song Mengxuan, Chen Kai, He Zhongyang. Bionic optimization for micro-siting of wind farm on complex terrain[J]. Renewable Energy,2013,50(2): 551-557.[7]Heath M A, Walshe J D, Watson S J. Estimating the potential yield of small building-mounted wind turbines[J]. Wind Energy,2007,10(3): 271-287.[8]张怀全. 风资源与微观选址: 理论基础与工程应用[M].北京, 机械工业出版社, 2013.[9]陶文铨. 数值传热学 [M]. 2版.西安: 西安交通大学出版社, 2001.[10]IEC 61400-1.Wind turbines-part 1: Design requirements [S].International Standard,2005.[11]Abohela I, Hamza N, Dudek S. Effect of roof shape, wind direction, building height and urban configuration on the energy yield and positioning of roof mounted wind turbines[J]. Renewable Energy, 2013, 50(2): 1106-1118.[12]王强,汪建文,侯亚丽. 集装箱顶风力机的微观选址及功率预测研究[J].太阳能学报, 2015, 36(4): 812-817. Wang Qiang, Wang Jianwen, Hou Yali. Study of micrositing and power prediction of wind turbine at the top of the container[J]. Acta Energiae Solaris Sinica, 2015, 36(4): 812-817.(in Chinese)
没有找到本文相关文献
江苏大学梦溪校区(镇江市梦溪园巷30号)图书馆5楼 0511-84440893
传真0511--84440033 Copyright 江苏大学杂志社 2010-2015 All
Rights Reserved