Abstract:In order to study the relationship between the pressure regulating properties and the structural parameters of pressure regulator used in irrigation system, tests on the pressure regulating properties of seven low flow types of pressure regulators integrated with springs were conducted. The relationship between the spring parameters and the preset outlet pressure, and the forces acting on the builtin moving parts were also analyzed. The results showed that pressure regulator with lower preset outlet pressure has higher performance of regulating. The difference between measured critical working pressure and preset outlet pressure increases with the preset outlet pressure and is not equal to a constant of 0.034 MPa. As the preset outlet pressure increases, the spring stiffness constant increases with a larger spring diameter and a shorter spring natural length. Both the initial and maximum spring forces are in positive linear relationship with the preset outlet pressure. As well, when the regulating part moves toward the inlet of the pressure regulator, the ratio of spring force to hydrostatic pressure exerting on the outlet crosssection of the regulating part increases with an average from 57.9% to 66.5%, and the sum of friction force of the sealing part and the deformation force of rubber diaphragm decreases with an average from 39.9% to 31.3%.
严海军, 姚培培, 王 敏. 灌溉用压力调节器性能试验与受力分析[J]. 排灌机械工程学报, 2010, 28(6): 548-552.
Yan Haijun, Yao Peipei, Wang Min. Performance test and force analysis of pressure regulator used in irrigation system. Journal of Drainage and Irrigation Machinery Engin, 2010, 28(6): 548-552.
[1]田金霞,龚时宏,李光永.滴灌系统中压力调节器应用的经济性分析[J].灌溉排水学报,2004,23(4):55-57.Tian Jinxia,Gong Shihong,Li Guangyong.Economic analysis of pressure regulators in the drip irrigation system[J].Journal of Irrigation and Drainage,2004,23(4):55-57.(in Chinese)[2]王新坤.微灌毛管进口流量调节器应用的经济性分析[J].排灌机械,2008,26(2):57-60.Wang Xinkun.Economic analysis on application of discharge regulator in micro-irrigation lateral inlet[J].Drainage and Irrigation Machinery,2008,26(2):57-60.(in Chinese)[3]Lamaddalena N,Pereira L S.Assessing the impact of flow regulators with a pressure-driven performance analysis model[J].Agricultural Water Management,2007,90(1/2):27-35.[4]余晓明,茅忠明,孔彪龙.减压阀性能试验与内部流场数值计算[J].上海理工大学学报,2009,31(2):183-189.Yu Xiaoming,Mao Zhongming,Kong Biaolong.Computer assistant test and numerical simulation analysis for pressure reduing valve[J].Journal of University of Shanghai for Science and Technology,2009,31(2):183-189.(in Chinese)[5]Rami E G,Jean-Jacques B,Bruno D,et al.Modelling of a pressure regulator[J].International Journal of Pressure Vessels and Piping,2007,84(4):234-243.[6]Tesar V.Extremely simple pressure regulator-computation studies[J].Chemical Engineering Journal,2009,155(1/2):361-370.[7]田金霞,龚时宏,李光永,等.微灌压力调节器参数对出口预置压力影响的研究[J].农业工程学报,2005,21(12):48-51.Tian Jinxia,Gong Shihong,Li Guangyong,et al.Impacts of pressure regulator parameters on preset pressure in micro-irrigation system[J].Transactions of the CSAE,2005,21(12):48-51.(in Chinese)[8]臧丽花,牛文全,吴普特.低压滴灌系统大流量压力调节器的研制[J].西北农林科技大学学报:自然科学版,2006,34(7):142-146.Zang Lihua,Niu Wenquan,Wu Pute.Development of the pressure regulator for large flow in lower-pressure drip irrigation system[J].Journal of Northwest Sci-Tech University of Agriculture and Forestry:Natural Science Edition,2006,34(7):142-146.(in Chinese)[9]Nelson Irrigation Corporation.Pressure regulator literature[EB/OL].[2010-03-01].http://www.nelsonirrigation.com/products/index.cfm?id=11&speci-ficquery=1.[10]国家标准局.GB/T 18688-2002 农业灌溉设备灌溉阀的压力损失试验方法[S].北京:标准出版社,2002.