Abstract:In order to compare erosion effect of the selfexcited inspired pulsatile jet with the continuous one under different submergence conditions,experimental studies of paraffin erosion caused from a jet was carried out by using own developed apparatus.In the experiments,the jet impact power,inspired air capacity,eroded surface depth,volume loss and eroded surface area were obtain under different submerged depths.The experimental results showed that the impact power of the continuous jet is larger than inspiration pulse jet; while the power of the inspired pulsatile jet is higher than that of the jet without inspiration.Moreover,the difference in impact power between the inspired and noninspired jets steadily gets smaller with increasing submerged depth.When the submerged depth is shallower(30 m or less),the eroded surface depth of the continuous jet is smaller than the inspired pulsatile jet due to the stronger denudation caused from the air inspired.However,if the submerged depth is deeper(40 m or more),the eroded surface depth of the continuous jet is larger than the inspired pulsatile jet because of the less air inspired.The eroded surface area and volume loss of the inspired pulsatile jet are less than the continuous jet under various submerged depths.The eroded surface area and volume loss of two kinds of jet become small gradually,and their difference between the two jets also gets closer and closer with increasing submerged depth.
参考文献(References)[1]李国英.基于水库群联合调度和人工扰动的黄河调水调沙[J].水利学报,2006,37(12):1439-1446.Li Guoying.Regulation of water and sediment for the Yellow River based on joint operation of reservoirs and artificial intervention[J].Journal of Water Resources Engineering,2006,37(12):1439-1446.(in Chinese)[2]李根生,廖华林,黄中伟,等.超高压水射流作用下岩石损伤破碎机理[J].机械工程学报,2009,45(10):284-292.Li Gensheng,Liao Hualin,Huang Zhongwei,et al.Rock damage mechanisms under ultrahigh pressure water jet impact[J].Journal of Mechanical Engineering,2009,45(10):284-292.(in Chinese)[3]Libor M Hlavác,Irena M Hlavácová,Petr Jandacka.Comminution of material particles by water jetsInfluence of the inner shape of the mixing chamber[J].International Journal of Mineral Processing,2010,95(1/2/3/4):25-29.[4]卢义玉,葛兆龙,李晓红.高压空化水射流破岩主要影响因素的研究[J].四川大学学报:工程科学版,2009,41(6):1-5.Lu Yiyu,Ge Zhaolong,Li Xiaohong.Study on main factors of rock breakage with highpressure cavitating water jets[J].Journal of Sichuan University:Engineering Science Edition,2009,41(6):1-5.(in Chinese)[5]王宗龙,胡寿根,姚文龙.淹没条件下超高压磨料水射流切割岩石的实验研究[J].水动力学研究与进展:A辑,2009,24(2):150-155.Wang Zonglong,Hu Shougen,Yao Wenlong.Experimental research of ultrahigh pressure abrasive water jet cutting rock in submerged environment[J].Journal of Hydrodynamics:Ser A,2009,24(2):150-155.(in Chinese)[6]Azmira M A,Ahsanb A K.A study of abrasive water jet machining process on glass/epoxy composite laminate[J].Journal of Materials Processing Technology,2009,209(20):6168-6173.[7]Fowler G,Pashby I R,Shipway P H.The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V[J].Wear,2009,266(7/8):613-620.[8]Foldynaa J,Siteka L,Scuckaa J,et al.Effects of pulsating water jet impact on aluminum surface[J].Journal of Materials Processing Technology,2009,209(20): 6174-6180.[9]李江云,徐如良,王乐勤.自激脉冲喷嘴发生机理数值模拟[J] .工程热物理学报,2004,25(2):241-243.Li Jiangyun,Xu Ruliang,Wang Leqin.Numerical simulation of mechanism of the selfexcited pulse nozzle[J].Journal of Engineering Thermophysics,2004,25(2):241-243.(in Chinese)[10]王乐勤,王循明,徐如良.自激振荡脉冲喷嘴结构参数配比试验研究[J].工程热物理学报,2004,25(6): 956-958.Wang Leqin,Wang Xunming,Xu Ruliang.Experimental study on structural parameters optimized design of the selfexcited oscillation pulsed jet nozzle[J].Journal of Engineering Thermophysics,2004,25(6):956-958.(in Chinese)[11]唐川林,胡东,裴江红.自激振荡脉冲射流喷嘴频率特性实验研究[J].石油学报,2007,28(4):122-125.Tang Chuanlin,Hu Dong,Pei Jianghong.Experimental study on the frequency characteristic of the selfexcited oscillation pulsed nozzle[J].Acta Petrolei Sinica,2007,28(4):122-125.(in Chinese)