|
|
|
| Design program for axial flow impeller blade based on Joukowski transform |
| YAN Jing1, WANG Tao1, XIAO Guo-Hua2, LI Yu2 |
| (1.School of Energy and Environment, Xihua University, Chengdu, Sichuan 610039, China; 2. Zigong Industry Pump Co. Ltd., Zigong, Sichuan 643600, China) |
|
|
|
|
Abstract To improve the performance of axial flow pumps and upgrade the design principle of the pump blades, a new approach for calculating the blade camber was proposed here. The principle and procedure that the approach designs the blades of axial flow impeller were presented based on the Joukowski transform. The geometrical properties of an eccentric circular cylinder, which was formed by the superposition of three twodimensional potential flows—a doublet, a uniform plane flow and a point vortex, fluid dynamics around it and the position of stagnation point on it were described. Further, the geometrical properties of a circle arc, which was derived from Joukowski transform, and the fluid dynamics around it were discussed as well. Based on the above achievements, the method and producer for determining the direction and shape of a blade camber were developed in terms of the specified circulation and freestream velocity. The method and producer proposed here are completely different from the traditional ones, such as the singularity method, streamline method and so on for axial flow pump blades. The new approach is easily handled by pump engineers and it is hopeful that the approach can offer a new way for designing axial flow pump blades for the engineers.
|
|
Received: 29 September 2011
Published: 10 April 2012
|
|
|
|
| 参考文献(References)［1］Singh P, Nestmann F. Axial flow impeller shapes: Part 1［J］. World Pumps, 2011(2):36-39.［2］Singh P, Nestmann F. Axial flow impeller shapes: Part 2［J］. World Pumps, 2011(3):38-41.［3］杨敬江,关醒凡. 高比转数轴流泵水力模型设计［J］. 农业机械学报, 2008,39(12): 89-92.Yang Jingjiang, Guan Xingfan. Hydraulic design of high specific speed model axialflow pump［J］. Transactions of the Chinese Society for Agricultural Machinery, 2008,39(12): 89-92.(in Chinese)［4］刘树红，吴玉林，周雪漪，等.应用流体力学［M］.北京：清华大学出版社,2006:232.［5］罗惕乾,程兆雪,谢永曜.流体力学［M］. 北京:机械工业出版社,2008:311-322.［6］严敬,赵琴,杨小林.工程流体力学［M］. 重庆:重庆大学出版社,2008:108-111.［7］关醒凡.现代泵理论与设计［M］. 北京:中国宇航出版社,2011:511-515.［8］杨帆,刘超,汤方平,等.大型立式轴流泵装置流道内部流动特性分析［J］.农业机械学报,2011,42(5):39-43.Yang Fan, Liu Chao, Tang Fangping, et al. Characteristics of flow in large vertical axial flow pumping system［J］. Transaction of the Chinese Society for Agricultural Machinery, 2011,42(5):39-43.(in Chinese)［9］Singh P, Nestmann F. Exit blade geometry and partload performance of small axial flow propeller turbines: An experimental investigation［J］. Experimental Thermal and Fluid Science, 2010,34(6):798-811.［10］Li Wenguang. Verifying performance of axialflow pump impeller with low NPSHr by using CFD［J］. Engineering Computations, 2011,28(5):557-577. |
|
|
|
