|
|
Casing modification and stress safety of boiler circulation pumps |
FAN Yi-Zhang, ZUO Zhi-Gang, LIU Shu-Hong, SHA Yu-Jun, XU Ling-Jun |
(1.State Key Laboratory of Hydroscience and Engineering, Tsinghua University, Beijing 100084, China; 2. TR153 Strukturmechanik, KSB Aktiengesellschaft, Frankenthal 67227, Germany) |
|
|
Abstract In order to reduce manufacture cost, it is proposed to modify one boiler circulation pump by using casting method instead of forge method and reducing internal radius of semispherical casing. Based on ASME Code Section Ⅷ Division 2, using Ansys Mechanical software, adopting finite element method (FEM), Miner′s rule and rainflow counting method, static strength usage factors and low cycle fatigue usage factors of four pump casings were calculated. The calculation shows that static strength usage factors and low cycle fatigue usage factors are all smaller than 1; when the internal radius is reduced to 0.875, maximum static strength usage factor is reduced by 7%, maximum low cycle fatigue usage factor by 84%; when wall thickness is increased to 1.375, maximum static strength usage factor is reduced by 19.5%, maximum low cycle fatigue usage factor is increased by 221.4%. The results show that casting material is stress safe; smaller radius can help improve static strength and greatly reduce low cycle fatigue; and larger wall thickness can greatly help improve static strength and significantly reduce low cycle fatigue.
|
Received: 11 June 2012
Published: 30 April 2013
|
|
|
|
[1]樊泉桂. 超超临界锅炉设计及运行[M].北京:中国电力出版社, 2010:134-143.[2]李新堂,祝宝珣. 600 MW超临界直流锅炉启动系统运行特性探讨[J].电力建设,2008,29(2):55-57.Li Xintang, Zhu Baoxun. Discussion on operating characteristics of 600 MW supercritical oncethrough boiler startup system[J]. Electric Power Construction, 2008, 29(2):55-57. (in Chinese)[3]马晓珑,王军. 超(超)临界火电机组取消炉水循环泵的可行性研究[J]. 东方电气评论,2010,24(94):17-23.Ma Xiaolong, Wang Jun. Feasibility study of boiler water circulating pump cancelled in ultrasupercritical unit[J]. Dongfang Electric Review, 2010, 24(94):17-23. (in Chinese)[4]Grote Guenter, Schneider Wolfgang. Development of forged casings for primary coolant pumps of nuclear power stations [J]. Atomkernenergie/Kerntechnik, 1979, 34(2): 94-100.[5]阚玉琦,朱喜斌,赵家镇. 核电站冷却剂泵泵壳铸造质量控制[J]. 热加工工艺,2010,39(7):58-61.Kan Yuqi, Zhu Xibin, Zhao Jiazhen. Quality controlling of reactor coolant pump casing casting[J]. Hot Working Technology, 2010, 39(7):58-61. (in Chinese)[6]李宏伟,杨成. 基于ANSYS的内啮合齿轮泵壳体有限元分析及优化[J]. 液压与气动,2011(2):32-35.Li Hongwei, Yang Cheng. The finite element analysis and optimization of shell for internal gear pump based on ANSYS[J]. Chinese Hydraulic and Pneumatics, 2011(2):32-35. (in Chinese)[7]范谊章. 核主泵泵壳的水力改型和铸造模拟[D].北京:清华大学热能工程系, 2011.[8]Peng Guangjie, Wang Zhengwei, Yan Zongguo, et al. Strength analysis of a large centrifugal dredge pump case[J]. Engineering Failure Analysis, 2009, 16(1):321-328.[9]Zhao Chenggang, Li Junmin, Li Ruijun. Simulation analysis for stress field of 100 T hotmetal ladle based on ANSYS[C]∥Proceedings of 2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering. Changchun:[s.n.], 2010:100-102.[10]Hyder M Javed, Asif M. Optimization of location and size of opening in a pressure vessel cylinder using ANSYS[J]. Engineering Failure Analysis, 2008, 15(1/2):1-19.[11]ASME. 1995 ASME Boiler & Pressure Vessel Code: An Internationally Recognized Code[M]. New York: The American Society of Mechanical Engineers, 2010. |
|
|
|