|
|
|
| Numerical analysis for frame of vertical radial press concrete pipe machine based on Workbench |
| ZHANG Guangdong, GE Youhua, HAO Xinyu, MA Ruhong, YUAN Tiejun |
| School of Mechanical Engineering, Yancheng Institute of Technology, Yancheng, Jiangsu 224051, China |
|
|
|
|
Abstract The CAD/CAM software Pro/E was used to model the frame of vertical radial press concrete pipe machine. Static analysis, modal analysis and transient dynamic analysis have been carried out based on the ANSYS Workbench simulation platform. Hot rolling H steel has been used as the column and beam of the tube machine frame, whose material is Q235B. Through the static analysis, when the load change of the lower mobile platform is great, with the replacement of large diameter mold, the supporting cylinder and traction cylinder structure strength is insufficient. Through the modal analysis, it is shown that the lateral support stiffness of the pipe making machine is insufficient, and its stability of the lower order vibration of the whole frame should be strengthened according to the low order mode. According to the transient analysis, the transient stress concentration area of the pipe machine frame is mainly on the column and lateral support, which is consistent with the expectation, and needs to be strengthened. Through the static, modal and transient analyses, the rationality of frame design, and design optimization were verified and, impact load with the change of time on the frame structure were studied, which provided the necessary basis for the design of large diameter vertical radial press concrete pipe machine.
|
|
Received: 03 January 2016
|
|
|
|
| [1]熊晓军. 试析用径向挤压法制作大直径排水管的可行性[J]. 混凝土与水泥制品,1987(2):36-37. XIONG Xiaojun. Analysis on the feasibility of making large diameter drainage pipe by using radial press me-thod [J]. China concrete and cement products, 1987(2):36-37.(in Chinese)[2]SSHILLER G. Method and apparatus for producing multilayered concrete pipes: EP, EP 1473128 A2[P]. 2004-11-03.[3]江苏华光双顺机械制造有限公司.立式径向挤压制管机, CN201010135092.6[P].2010-08-11.[4]江苏邦威机械制造有限公司.径向挤压制管机, CN201110288193.1[P].2012-01-11.[5]纪爱民. 立式径向挤压制管工艺技术及设备[J]. 混凝土与水泥制品, 2011(8):25-30. JI Aiming. Vertical radial extruding process technology and its equipment [J]. China concrete and cement products, 2011(8):25-30.(in Chinese)[6]何文斌, 曾攀, 林峰,等. 40MN钢丝缠绕多向模锻液压机机架有限元模态分析[J]. 锻压技术, 2011, 36(2):69-73. HE Wenbin, ZENG Pan, LIN Feng, et al. Finite element modal analysis of steel wire wound frame for 40 MN multi-cored hydraulic press [J]. Forging & stamping technology, 2011, 36(2):69-73.(in Chinese)[7]孙海生,常春梅,卢奇等. 锆制换热器研究进展与前景[J]. 化工设备与管道, 2015, 52(2): 54-57. SUN Haisheng,CHANG Chunmei,LU Qi1 et al. Research Progress and Prospect of Zirconium Heat Exchanger[J]. Process equipment & piping, 2015, 52(2): 54-57.(in Chinese)[8]宁远林,冯秋元,张永强等. 锆制压力容器活套法兰接管的结构分析[J]. 化工设备与管道, 2014, 51(6): 10-12. NING Yuanlin,FENG Qiuyuan,ZHANG Yongqiang et al. Structural Analysis of Loose-type Flanged Connection in Zirconium Pressure Vessel[J]. Process equipment & piping, 2014, 51(6): 10-12.(in Chinese)[9]张永康, 李英杰, 王匀,等. 风车安装船的站立稳定性数值分析[J]. 江苏大学学报(自然科学版), 2013, 34(2):239-243. ZHANG Yongkang,LI Yingjie,WANG Yun,et al. Numerical analysis on standing stability of wind turbine installation vessel [J]. Journal of Jiangsu University(natural science edition), 2013, 34(2):239-243.(in Chinese)[10]王永岩, 张鹏程. 基于PRO/E与AWE的梳棉机机架优化仿真分析[J]. 青岛科技大学学报(自然科学版), 2015, 36(5):558-563. WANG Yongyan, ZHANG Pengchen. Optimization and simulation analysis of carding frame based on PRO/E and AWE [J]. Journal of Qingdao University of Science and Technology(natural science edition), 2015, 36(5):558-563.(in Chinese)[11]BNCI H, DURGUN M Y, RZAOLU T, et al. Investigation of durability properties of concrete pipes incorporating blast furnace slag and ground basaltic pumice as fine aggregates[J]. Scientia iranica, 2012, 3(19):366-372.[12]PEYVANDI A, BALACHANDRA A M, SOBOLEV K, et al. Enhancement of the durability characteristics of concrete nanocomposite pipes with modified graphite nanoplatelets[J]. Construction & building materials, 2013, 47(5):111-117. |
|
|
|
