水动冷却塔直驱混流式水轮机转轮数值模拟优化

doi:10.3969/j.issn.1674-8530.14.0001

Abstract
Figure/Table
References
Related Citation (15)

[1]李延频, 南海鹏, 陈德新. 冷却塔专用水轮机的工作特性与选型[J]. 水力发电学报, 2011, 30(1): 175-179.
　　Li Yanpin, Nan Haipeng, Chen Dexin. Performance and type selection of special hydraulic turbine in cooling tower[J]. Journal of Hydroelectric Engineering, 2011,30(1):175-179.(in Chinese)
[2]张丽敏, 郑源, 张成华, 等. 用于冷却塔的超低比转数混流式水轮机设计[J]. 农业机械学报, 2010,41(S0): 39-42.
　　Zhang Limin, Zheng Yuan, Zhang Chenghua, et al. Study on francis turbine with super-low specific speed applied in cooling towers[J]. Transactions of the Chinese Society for Agricultural Machinery, 2010,41(S0):39-42.(in Chinese)
[3]黄剑峰, 张立翔, 何士华. 混流式水轮机全流道三维定常及非定常流数值模拟[J]. 中国电机工程学报, 2009,29(2):87-94.
　　Huang Jianfeng, Zhang Lixiang, He Shihua. Numerical simulation of 3-D steady and unsteady flows in whole flow passage of a Francis Hydro-turbine[J]. Procee-dings of the CSEE, 2009,29(2):87-94.(in Chinese)
[4]Khare R, Prasad D V, KUMAR D S. CFD approach for flow characteristics of hydraulic Francis Turbine[J]. International Journal of Engineering Science and Technology, 2010,2(8):3824-3831.
[5]辛喆,吴俊宏,常近时. 混流式水轮机的三维湍流流场分析与性能预测[J]. 农业工程学报,2010,26(3):118-124.
　　Xin Zhe, Wu Junhong, Chang Jinshi. Flow field analysis and performance prediction of three-dimensional turbulent flow in Francis Turbine[J]. Transactions of the CSAE, 2010,26(3):118-124.(in Chinese)
[6]Laín S, García M, Quintero B, et al. CFD numerical simulations of Francis Turbines[J]. Revista Facultad de Ingenieria Universidad de Antioquia, 2010(51): 24-33.
[7]Jain S, Saini R P, Kumar A. CFD approach for prediction of efficiency of Francis Turbine[EB/OL]. [2014-01-09]. http://www.ahec.org.in/links/IGHEM_-2010/Papers/TSF-04.pdf.
[8]Nicolle J, Labbé P, Gauthier G, et al. Impact of blade geometry differences for the CFD performance analysis of existing turbines[C]//Proceedings of IOP Conference Series: Earth and Environmental Science. Bristol, UK: IOP Publishing, 2010,12(1):012028.
[9]Anagnostopoulos J S. A fast numerical method for flow analysis and blade design in centrifugal pump impellers[J]. Computers & Fluids, 2009,38(2): 284-289.
[10]齐学义,刘永明,胡家旺,等. 提高超低比转数离心泵效率的方法[J]. 水电能源科学,2011,29(2):118-120.
　　Qi Xueyi, Liu Yongming, Hu Jiawang, et al. Method of improving efficiency of low specific speed centrifugal pump[J]. Water Resources and Power, 2011,29(2):118-120.(in Chinese)
[11]陈有志,李刚,王景辉. 改善低比转数离心泵水力性能的几种方法[J]. 防爆电机, 2005,40(3):46-48.
　　Chen Youzhi, Li Gang, Wang Jinghui. Several methods for improving the hydraulic properties of low-speed ratio centrifugal pumps[J]. Explosion-Proof Electric Machine, 2005,40(3):46-48.(in Chinese)
[12]沈艳宁, 袁寿其, 陆伟刚, 等. 复合叶轮离心泵数值模拟正交试验设计方法[J]. 农业机械学报, 2010,41(9):22-26.
　　Shen Yanning, Yuan Shouqi, Lu Weigang, et al. Orthogonal test design method based on numerical simulation for non-overload centrifugal pump with complex impeller[J]. Transactions of the Chinese Society for Agricultural Machinery, 2010,41(9):22-26.(in Chinese)
[13]董如何, 肖必华, 方永水. 正交试验设计的理论分析方法及应用[J]. 安徽建筑工业学院学报:自然科学版,2004,12(6):103-106.
　　Dong Ruhe, Xiao Bihua, Fang Yongshui. The theoretical analysis of orthogonal teat designs[J]. Journal of Anhui Institute of Architecture & Industry: Natural Science, 2004,12(6):103-106.(in Chinese)
[14]袁寿其, 张金凤, 袁建平, 等. 用正交试验研究分流叶片主要参数对性能影响[J]. 排灌机械, 2008,26(2):1-5.
　　Yuan Shouqi, Zhang Jinfeng, Yuan Jianping, et al. Orthogonal experimental study effect of main geometry factors of splitter blades on pump performance[J]. Drai-nage and Irrigation Machinery, 2008,26(2):1-5.(in Chinese)
[15]赵亚萍,廖伟丽,李志华,等. C型及S型叶片的贯流式水轮机流场特性[J]. 农业工程学报,2013,29(17):47-53.
　　Zhao Yaping, Liao Weili, Li Zhihua, et al. Flow field performance of bulb turbine with C-type or S-type blades[J]. Transactions of the CSAE, 2013,29(17):47-53.(in Chinese)