|
|
Model experiment of vertical axial-flow pump system for drainage pumping station |
YANG Jing-jiang |
Technical and Research Center of Fluid Machinery Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China |
|
|
Abstract In order to meet the requirements for the rebuilding of a drainage pumping station,a model experimental research on characteristics of vertical axial-flow pump system has been conducted.The vertical axial-flow pump model is comprised of a hydraulic model of specific speed 700,an elbow inlet and a straight outlet conduit.Performance and cavity characteristics of the model pump and the prototype pump are obtained,so is the runaway speed characteristics.At-4? of impeller blades install angle,the maximum efficiency of the model pump is 76.21% with head 6.39m and flow rate 0.298 m3/s.The maximum efficiency of the prototype pump is 83.87% with head 6.00 m and flow rate 25.9 m3/s.At the maximum head,the shaft power of prototype pump is less than 2 300 kW.The hydraulic model and optimal straight outlet conduit meet the operating condition of the pumping station.
|
Received: 08 August 2013
|
|
|
|
[1] Zierke W C,Straka W A,Taylor P D.An experimental investigation of the flow through an axial-flow pump[J].Journal of Fluids Engineering,Transactions of the ASME,1995,117(3):485-490[2] Kaya D.Experimental study on regaining the tangential velocity energy of axial flow pump[J].Energy Conversion and Management,2003,44(11):1817-1829[3] 仇宝云,林海江,袁寿其.大型水泵出水流道优化水力设计[J].机械工程学报,2006,42(12):47-51[4] LI Yaojun,WANG Fujun.Numerical investigation of performance of an axial-flow pump with inducer[J].Journal of Hydrodynamics Series B,2007,19(6):705-711[5] 陶海坤,祝宝山,曹树良.钟形进水流道吸水室后壁的优化设计[J].江苏大学学报(自然科学版),2007,28(3):228-231[6] 朱红耕,张仁田,邓东升.大型水泵装置全流道数值模拟与性能预测[J].排灌机械,2008,26(3):46-50[7] 陆林广,刘军,梁金栋.大型泵站出水流道三维流动及水力损失数值计算[J].排灌机械,2008,26(3):51-54[8] 刘宁,汪易森,张纲.南水北调工程水泵模型同台测试[M].北京:中国水利水电出版社,2006 |
|
|
|