Contrast and analysis between 2D and 3D flow field of jet mixing apparatus
Qiu Baijing, Xu Xichao
(Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education & Jiangsu Province, Jiangsu University, Zhenjiang, Jiangsu 212013, China)
Abstract:Aimed at investigating the design method and test method of jetmixing apparatus, numerical simulation and experiment research were both used to investigate the internal flow field of jet mixing apparatus. In the numerical simulation,3D model of jet mixing apparatus were established.With no consideration of the internal flow field in the near suction pipe,2D axisymmetric model was also established, and then numerical simulation scheme for both 2D axisymmetric model and 3D model flow interior field were set up. Numerical investigation for their interior flow field were performed with CFD software Fluent. It is found that compare to 3D model, the 2D axisymmetric model can save 64% CPU time for the same case. In the experiment research, mixing test bench was constructed, and performance parameters of jet mixing apparatus were recorded. The experimental data were used to validate the numerical data. Results show that the simulated results and experiment results agree well with each other. The average relative deviation was 4.14%,and maximum relative deviation was 7.41% for 2D axisymmetric model. The average relative deviation was 3.41%and maximum relative deviation was 5.13% for 3D model. The established models can be used in engineering calculations.
邱白晶, 徐溪超. 射流混药装置二维和三维流场对比分析[J]. 排灌机械工程学报, 2011, 29(5): 441-445.
Qiu Baijing, Xu Xichao. Contrast and analysis between 2D and 3D flow field of jet mixing apparatus. Journal of Drainage and Irrigation Machinery Engin, 2011, 29(5): 441-445.
[1] 祁力钧,傅泽田,史 岩.化学农药施用技术与粮食安全[J].农业工程学报,2002,18(6):203-206.Qi Lijun,Fu Zetian,Shi Yan. Technology of pesticide application and food security[J].Transactions of the CSAE,2002,18(6):203-206.(in Chinese)[2] Ghate S R,Perry C D. Ground speed control of pesticide application rates in a comperssed air direct injection sprayer[J].Transactions of the ASAE, 1994,37(1):33-38.[3] Frost A R.A pesticide injection metering system for use on agricultural spraying machines[J].Journal of Agricultural Engineering Research,1990,46:55-70.[4] Ghate S R,Phatak S C.A compressed air direct injection pesticide sprayer[J].Applied Engineering in Agriculture,1991,7(2):158-162.[5] Zhu H,Fox R D,Ozkan H E,et al. A system to determine lag time and mixture unifoumity for inline injections sprayers[J].Applied Engineering in Agriculture, 1998,14(2):103-110.[6] Vondricka J,Lammers P S. Real time controlled direct injection system for precision farming[J].Precision Agriculture,2009,10(5):421-430.[7] 何培杰,陈翠英,吴春笃,等.射流混药装置混合管流场数值计算[J].江苏大学学报:自然科学版,2002,23(2):13-16.He Peijie,Chen Cuiying,Wu Chundu,et al. Numerical computation of mixing pipe flow field in jet mixing apparatus pesticide mixture[J].Journal of Jiangsu University: Natural Science Edition,2002,23(2):13-16.(in Chinese)[8] Xu Youlin,Zhou Fengfang,Guo Jingkun,et al. Flow field simulation of chemical mixing process for direct injection system based on CFD[C]∥American Society of Agricultural and Biological Engineers Annual International Meeting 2008, 2008,2:1117-1126.[10]李羊林,吴春笃,傅锡敏.双级射流混药装置的试验研究[J].农业工程学报,2008,24(1):172-174.Li Yanglin,Wu Chundu,Fu Ximin. Experimental study on two stage jet mixing apparatus[J].Transactions of the CSAE,2008,24(1):172-174.(in Chinese)[11邱白晶,徐溪超,杨 宁,等.射流混药装置结构参数对混药性能影响的模拟分析[J].农业机械学报,2011,42(6):76-79.Qiu Baijing,Xu Xichao,Yang Ning,et al. Simulation analysis of structure parameters of jet mixing apparatus on jet mixing performance[J].Transactions of the Chinese Society for Agricultural Machinery,2011,42(6):76-79.(in Chinese)