Abstract:The 2D slip physical hydraulic model and axisymmetric numerical models were applied to investigate the wake flow direction of the vertical pipe inlet/outlet outflow. The results of the 2D model experiment and the axisymmetric numerical simulations showed that the outflow of vertical pipe with the cover plate performed as jet flow, and the direction of wake flow changed with the water level. The wake flow would shift to the surface layer when the water depth was small and it would turn to the bed when the water depth was high.The 3D model experiment showed that the outflow head loss coefficient was 0.61 with an antiswirl plate mounted above vertical inlet/outlet,and the factors were about 0.44~0.48 for other types of structures of statewide antiswirl beam,flat antiswirl beam or non antiswirl beam.The inflow head loss factors were about 0.4 for all types of intakes.The model experiment results also suggested that it was able to provide uniformity flow with pipe diffuse angle of less than 9°. An individual big spiral vortex appeared above the inlet structure during the inflow model experiment under the conditions of high water level. As the water level went down, the big spiral vortex would collapse into several small ones, and the number of spiral vortexes was same as the number of the guide walls.When two intakes were working at the same time,spiral vortexes would interact,one was dextrorotatory and another was levorotatory.
程伟平, 胡云进, 章军军, 毛根海. 竖井式抽水蓄能电站进/出水口的水力特征[J]. 排灌机械工程学报, 2010, 28(6): 537-542.
Cheng Weiping, Hu Yunjin, Zhang Junjun, Mao Genhai. Study on hydraulic characteristics of vertical pipe inlet/outlet of pumped storage plants. Journal of Drainage and Irrigation Machinery Engin, 2010, 28(6): 537-542.
[1]宋慧芳.抽水蓄能电站盖板竖井式进/出水口水力特性研究[D].天津:天津大学建筑工程学院,2004.[2]高学平,张效先,李昌良,等.西龙池抽水蓄能电站竖井式进出水口水力学试验研究[J].水力发电学报,2002,21(1):52-60.Gao Xueping,Zhang Xiaoxian,Li Changliang.The hydraulic characteristics at vertical pipe intake of Xilongchi pumped storage plant[J].Journal of Hydroelectric Engineering,2002,21(1):52-60.(in Chinese)[3]刘健.抽水蓄能电站竖井式进/出水口数值模拟[D].天津:天津大学建筑工程学院,2004.[4]高学平,刘健,宋慧芳.抽水蓄能电站竖井式出水口二维数值模拟[J].水利水电技术,2003,34(11):73-75,85.Gao Xueping,Liu Jian,Song Huifang.3-D numerical simulation on the vertical pipe outlet of pumped storage plant[J].Water Resources and Hydropower Enginee-ring,2003,34(11):73-75,85.(in Chinese)[5]高学平,张亚,刘健,等.抽水蓄能电站竖井式出水口三维数据模拟[J].水力发电学报,2004,23(2):35-38.Gao Xueping,Zhang Ya,Liu Jian,et al.3-D numerical simulation on the vertical pipe outlet of pumped storage plant[J].Journal of Hydroelectric Engineering,2004,23(2):35-38.(in Chinese)[6]陈容新,关醒凡,王伟,等.双向竖井贯流泵站模型泵装置模型试验[J].排灌机械,2007,25(1):33-37.Chen Rongxing,Guan Xingfan,Wang Wei,et al.Device model experiments of shaft-well two-direction tubular pumping station[J].Drainage and Irrigation Machinery,2007,25(1):33-37.(in Chinese)[7]Amphlett M B.Air-entraining vortices at a horizontal intake,Report No.OD/7[R].Wallingford:Hydraulic Research Station,1976.[8]Yildirim N,Jain S C.Surface tension effect on profile of a free vortex[J].Journal of the Hydraulics Division,1981,107(1):132-136.[9]Quick M C.Efficiency of air-entraining vortex formation at water intakes[J].Journal of the Hydraulics Division,1970,96(7):1403-1416.[10]Reddy Y R,Pickford J B.Vortices at intakes in conventional sumps[J].Water Power,1972,24(3):108-109.[11]胡云进,程伟平,章军军,等.无锡马山抽水蓄能电站上库进/出水口水工模型试验及数值模拟研究报告[R].杭州:浙江大学水工结构与水环境研究所,2004.