|
|
Heat transfer characteristics of ultra-thin flat-plate oscillating heat pipes with dual-diameter channels |
School of Energy and Power Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China |
|
|
Abstract The copper-based flat-plate oscillating heat pipes (FPOHPs) with thickness of 1.00 mm were designed and fabricated by printed circuit technology. The dual-diameter channels in the FPOHP with two neighboring channel widths of 1.00 and 2.20 mm were arranged, respectively. At the bottom of each wider channel, the parallel microgroove structures were respectively wet-etched. HFE-7100 was used as working fluid, and the start-up and the heat transfer performance of ultra-thin FPOHPs with/without micro grooves were compared at different filling ratios ranging from 30% to 50%. The experimental results show that the FPOHPs with/without micro grooves can start up and operate stably at both horizontal and vertical orientations, and the addition of microgroove structures can significantly enhance the FPOHP performance and lower the evaporator temperatures. The gravity independence of the FPOHP is improved after using microgroove structures. For the power input of 24 W, the effective thermal conductivities of the micro-grooved FPOHP at 30% filling ratio are respective 1 241 and 1 226 W/(m·℃) at horizontal and vertical orientations, which are increased by 25.6% and 18.7% as compared with those without micro grooves. The ultra-thin printed circuit FPOHP can largely meet the demand of electronic chip cooling.
|
Received: 17 February 2022
|
|
|
|
[1] |
KEARNEY D J, SULEMAN O, GRIFFIN J S, et al. Thermal performance of a PCB embedded pulsating heat pipe for power electronics applications[J]. Applied Thermal Engineering, 2016, 98: 798-809.
|
[2] |
孙芹, 屈健, 袁建平. 等截面和变截面通道硅基微型脉动热管传热特性比较[J]. 化工学报, 2017, 68(5): 1803-1810, 2218.
|
|
SUN Q, QU J, YUAN J P. Heat transfer performance comparison of silicon-based micro oscillating heat pipes with and without expanding channels[J]. CIESC Journal, 2017, 68(5): 1803-1810, 2218.(in Chinese)
|
[3] |
JANG D S, KIM D W, HONG S H, et al. Comparative thermal performance evaluation between ultrathin flat plate pulsating heat pipe and graphite sheet for mobile electronic devices at various operating conditions[J]. Applied Thermal Engineering, 2019, 149: 1427-1434.
|
[4] |
屈健, 杨学贵, 彭友权, 等. 紧凑型脉动热管大功率LED的冷却试验[J]. 江苏大学学报(自然科学版), 2020, 41(4): 399-404.
|
|
QU J, YANG X G, PENG Y Q, et al. Experiment of compact oscillating heat pipe for high-power LED cooling[J]. Journal of Jiangsu University (Natural Science Edition), 2020, 41(4): 399-404. (in Chinese)
|
[5] |
KHANDEKAR S, SCHNEIDER M, SCHAFER P, et al. Thermofluid dynamic study of flat-plate closed-loop pulsating heat pipes[J]. Microscale Thermophysical Engineering, 2002, 6(4): 303-317.
|
[6] |
LIN Z R, WANG S F, HUO J P, et al. Heat transfer characteristics and LED heat sink application of aluminum plate oscillating heat pipes[J]. Applied Thermal Engineering, 2011, 31(14/15): 2221-2229.
|
[7] |
MEHTA K, MEHTA N, PATEL V. Experimental investigation of the thermal performance of closed loop flat plate oscillating heat pipe[J]. Experimental Heat Transfer, 2021,34(1): 85-103.
|
[8] |
DENG Z L, ZHENG Y, LIU X D, et al. Experimental study on thermal performance of an anti-gravity pulsating heat pipe and its application on heat recovery utilization[J]. Applied Thermal Engineering, 2017,125: 1368-1378.
|
[9] |
CHIEN K H, LIN Y T, CHEN Y R, et al. A novel design of pulsating heat pipe with fewer turns applicable to all orientations[J]. International Journal of Heat and Mass Transfer, 2012, 55(21/22): 5722-5728.
|
[10] |
TSENG C Y, YANG K S, CHIEN K H, et al. A novel double pipe pulsating heat pipe design to tackle inverted heat source arrangement[J]. Applied Thermal Engineering, 2016, 106: 697-701.
|
[11] |
KWON G H, KIM S J. Experimental investigation on the thermal performance of a micro pulsating heat pipe with a dual diameter channel[J]. International Journal of Heat and Mass Transfer, 2015, 89: 817-828.
|
[12] |
TSENG C Y, YANG K S, WANG C C. Non-uniform three-dimensional pulsating heat pipe for anti-gravity high-flux applications[J]. Energies, DOI: 10.3390/en13123068.
|
[13] |
QU J, LI X J, WANG Q, et al. Heat transfer characte-ristics of micro-grooved oscillating heat pipes[J]. Experimental Thermal and Fluid Science, 2017, 85: 75-84.
|
[14] |
HAO T T, YU H W, MA X H, et al. Heat transfer enhancement of horizontal oscillating heat pipes with micro-/nanostructured surface[J]. Journal of Heat Transfer, DOI: 10.1115/1.4047216.
|
[15] |
QU J, GUAN F B, LYU Y J, et al. Experimental study on the heat transport capability of micro-grooved oscillating heat pipe[J]. Case Studies in Thermal Enginee-ring, DOI:10.1016/j.csite.2021.101210.
|
[16] |
褚雯霄, 李雄辉, 马挺, 等. 不同肋片结构的印刷电路板换热器传热与阻力特性[J]. 科学通报, 2017, 62(16): 1788-1794.
|
|
CHU W X, LI X H, MA T, et al. Heat transfer and pressure drop performance of printed circuit heat exchanger with different fin structures[J]. Chinese Science Bulletin, 2017, 62(16):1788-1794.(in Chinese)
|
[17] |
QU J, WANG Q. Experimental study on the thermal performance of vertical closed-loop oscillating heat pipes and correlation modeling[J]. Applied Energy, 2013, 112: 1154-1160.
|
[18] |
LIU X D, CHEN Y P, SHI M H. Dynamic performance analysis on start-up of closed-loop pulsating heat pipes (CLPHPs)[J]. International Journal of Thermal Sciences, 2013, 65: 224-233.
|
|
|
|