排灌机械工程学报
   Home  About Journal  Editorial Board  Author Center  Subscriptions    中文 
Journal of Drainage and Irrigation Machinery Engin  2011, Vol. 29 Issue (1): 50-53    DOI: 10.3969/j.issn.1674-8530.2011.01.011
article Current Issue | Next Issue | Archive | Adv Search Previous Articles  |  Next Articles  
Simulation of low frequency ultrasonic dual-atomization nozzle′s levitation process
Gao Jianmin1,2, Li Yangbo1
(1.Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education & Jiangsu Province, Jiangsu University, Zhenjiang, Jiangsu 212013, China; 2.United States Department of Agriculture Research Service, OH 44691,USA)
 Download: PDF (668 KB)   HTML (1 KB)   Export: BibTeX | EndNote (RIS)      Supporting Info
Abstract Researching the levitation to provide a theoretical basis for the second atomization and design guidelines, the finite element method was used, the 3D finite element model of the whole ultrasonic levitation system was built; the nozzle′s vibration frequency was 28 kHz,and its amplitude is 5 μm.Based on ultrasonic-structural coupled theory, the solution was carried out by the explicit dynamics software LS-DYNA; the motion states of the metal ball in the suspension was analyzed; obtaining the displacement, velocity, acceleration of the up and down movement and the angular velocity and angular acceleration. The results of numerical simulation show that the sound field is unstable when the low-frequency ultrasonic nozzle is vibrating; the acoustic radiation force generated by nozzle vibrates can suspend the metal ball to move up and down, and during the up and down movement, the metal ball also had a rotation around its centroid. The dynamics parameters of the ball suspended in the air are obtained through simulation compute, help to design the nozzle.
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
GAO Jian-Min
Li-Yang-Bo
Key wordsacoustic levitation   ultrasonic atomization   finite simulation   acoustic structural coupling   numerical analysis     
Received: 2011-05-17; Published: 2011-01-30
Cite this article:   
GAO Jian-Min, Li-Yang-Bo. Simulation of low frequency ultrasonic dual-atomization nozzle′s levitation process[J]. Journal of Drainage and Irrigation Machinery Engin, 2011, 29(1): 50-53.
 
[1] 高建民,任宁,顾峰,等.低频超声雾化喷头优化设计及试验[J].江苏大学学报:自然科学版,2009,30(1):1-4.Gao Jianmin,Ren Ning,Gu Feng,et al.Optimum de-sign and experiment on low-frequency ultrasonic atomi-zing nozzle[J].Journal of Jiangsu University:Natural Science Edition,2009,30(1):1-4.(in Chinese)
[2] 解文军,曹崇德,魏炳波.声悬浮的实验研究和数值模拟分析[J].物理学报,1999,48(2):250-256.Xie Wenjun,Cao Chongde,Wei Bingbo.Experimental investigation and numerical analysis on acoustic levita-tion[J].Acta Physica Sinica,1999,48(2):250-256.(in Chinese)
[3] 潘祥生,邢立华,李勋,等.聚焦式超声悬浮[J].北京航空航大大学学报,2006,32(1):79-82.Pan Xiangsheng.Xing Lihua,Li Xun,et al.Focusing ultra sonic levitation[J].Journal of Beijing University of Aeronautics and Astronautics,2006,32(1):79-82.(in Chinese)
[4] 任宁.基于聚焦式超声悬浮的低频超声雾化喷头仿真及试验研究[D].江苏大学农业工程研究院,2008.
[5] Capote F Priego,Luque de Castro.Ultrasound-assisted levitation:Lab-on-a-drop[J].Trends in Analytical Chemistry,2006,25(9):856-858.
[6] 时党勇,李裕春,张胜民.基于ANSYS/LS-DYNA8.1进行显示动力分析[M].北京:清华大学出版社,2005:7.
[7] 李杰,阎楚良,杨方飞.基于虚拟样机技术的联合收获机切割机构的仿真[J].农业机械学报,2006,37(10):74-77.Li Jie,Yan Chuliang,Yang Fangfei.Research on cut-ter's simulation of combine harvester based on virtual prototyping technology[J].Transactions of the Chinese Society for Agricultural Machinery,2006,37(10):74-77.(in Chinese)
[8] 熊珍兵,罗会信.基于HyperMesh的有限元前处理技术[J].排灌机械.2006,24(3):35-38.Xiong Zhenbing,Luo Huixin.Preprocessing technology of FEA based on HyperMesh software[J].Drainage and lrrigation Machinery,2006,24(3):35-38.(in Chi-nese)
[9] Jure Mencinger.On the finite volume discretization of discontinuous body force field on collocated grid:Appli-cation to VOF method[J].Journal of Computational Physics,2007.221:524-538.
[1] LI Chao, LIANG Qiu-Li, ZHAO Man. Numerical analysis of power loss on counterweight in scroll compressor[J]. Journal of Drainage and Irrigation Machinery Engin, 2012, 30(2): 162-166.
[2] Zhu Honggeng, Dai Longyang, Zhang Rentian, Zhu Guoxian, Lü Saijun, Fei Hairong. Development and numerical analysis of new type shaft tubular pumping system[J]. Journal of Drainage and Irrigation Machinery Engin, 2011, 29(5): 418-422.
[3] Wang Zhengzhong, Lu Qin, Guo Lixia. Numerical simulation of frost heave of concrete lining channel by taking consideration of radiation[J]. Journal of Drainage and Irrigation Machinery Engin, 2010, 28(5): 455-460.
[4] Fu Yonghong, Ji Jinghu, Hua Xijun, Yang Chaojun, Bi Qinsheng. Numerical analysis of integrated performance of mechanicalseals with regular micro surface structure[J]. Journal of Drainage and Irrigation Machinery Engin, 2010, 28(2): 169-173.
[5] He Xiuhua,Deng Xulian,Yang Song,Bi Yushi,Jiang Quanying. Numerical analysis of cavitation flow in vortex-valve piezoelectric micropump[J]. Journal of Drainage and Irrigation Machinery Engin, 2009, 27(6): 352-356.
[6] Chen Huilong,Zhai Xiao,Zhao Binjuan,Yang Shenghua,Li Ya′nan,Chen Ping. Numerical analysis on flow field in mechanical seal with porous seal ring face  [J]. Journal of Drainage and Irrigation Machinery Engin, 2009, 27(6): 398-402.
[7] . Numerical Analysis on the High Flow Area at Turbine Mode of The Pump Turbine[J]. Journal of Drainage and Irrigation Machinery Engin, 0, (): 14-.

Copyright © 2011 Journal of Drainage and Irrigation Machinery Engineering
Support by Beijing Magtech Co.Ltd   E-mail: support@magtech.com.cn