|
|
|
| Relationship of energy conversion for Venturi injector |
(1.Institute of Soil and Water Conservation, CAS & MWR, Yangling, Shaanxi 712100, China; 2.Institute of Watersaving Agriculture in Arid Areas of China, Northwest A＆F University, Yangling, Shaanxi 712100, China; 3.University of Chinese Academy of Sciences, Beijing 100049, China) |
|
|
|
|
Abstract To understand the causal conditions and processes of negative pressure in the throat of Venturi injector, by measuring pressures at the inlet, outlet and throat for Venturi injector respectively, the energy conversion relations of water flow at different feature sections were studied. The results show that the inlet pressure energy is translated into the throat kinetic energy when water flows through the Venturi injector. As the inlet pressure energy and the discharge increase, the kinetic energy in the throat increases, when the kinetic energy in the throat reaches a certain value, the pressure energy at the throat disappears completely and the negative pressure occurs. When the negative pressure reaches the minimum value and remains stable, the flow velocity increases significantly as the inlet pressure increases. The kinetic energy and head loss in the throat also increases very quickly as the flow rate increases. At the same flow rate, the differences between actual and theoretical flow velocity could indicate the size of throat vacuum space. Compared with freeoutflow conditions, under nonfreeoutflow conditions, the starting pressure causing the negative pressure in the throat increases, and the flow volume is relatively great. To obtain the same negative pressure, the inlet pressures and flow rate under nonfreeoutflow conditions are significantly greater than those under freeoutflow conditions.
|
|
Received: 17 October 2012
Published: 25 June 2012
|
|
|
|
| ［1］姚振宪,王三建. 我国滴灌发展历程及建议［J］. 农业工程,2011,1 (2): 54-58.Yao Zhenxian, Wang Sanjian. The drip irrigation development progress and suggestion of China ［J］. Agricultural Engineering,2011,1 (2):54-58.(in Chinese)［2］赵万华. 滴灌系统关键技术研究［J］. 中国农业科技导报， 2007, 9 (1): 21-25.Zhao Wanhua. The key technology of drip irrigation system ［J］. Review of China Agricultural Science and Technology, 2007, 9 (1): 21-25. (in Chinese)［3］李援农,马孝义. 节水灌溉新技术——喷灌、微灌技术(2)［J］. 农村实用工程技术, 2002 (12): 13-15.Li Yuannong, Ma Xiaoyi. Water saving irrigation, sprinkler irrigation and microirrigation new technology (2) ［J］. Applied Engineering Technology in Rural Areas,2002(12):13-15. (in Chinese)［4］黄兴法,李光永. 地下滴灌技术的研究现状与发展［J］. 农业工程学报, 2002, 18(2): 176-179.Huang Xingfa, Li Guangyong. Present situation and development of subsurface drip irrigation ［J］. Transactions of the CSAE, 2002,18 (2):176-179.(in Chinese)［5］周建斌,陈竹君,李生秀. Fertigation——水肥调控的有效措施［J］. 干旱地区农业研究. 2001 (4): 16-21.Zhou Jianbin, Chen Zhujun, Li Shengxiu. Fertigation—a efficient way to apply water and fertilizer［J］. Agricultural Research in the Arid Areas, 2001 (4): 16-21. (in Chinese)［6］杜森. 灌溉施肥技术的发展与应用［J］. 中国农业信息, 2010,22(7): 22-23.Du Sen. Technology development and application of fertigation［J］. China Agricultural Information, 2010,22(7): 22-23. (in Chinese)［7］李凯, 毛罕平, 李百军. 混药混肥装置控制性能分析［J］. 农业机械学报, 2003, 34(1): 50-53.Li Kai, Mao Hanping, Li Baijun. Analysis on control performance of various pesticide or fertilizer mixers ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2003, 34(1): 50-53. (in Chinese)［8］金永奎,夏春华,方部玲. 文丘里施肥器系列的研制［J］. 中国农村水利水电, 2006(5): 14-16.Jin Yongkui, Xia Chunhua, Fang Buling. Research and development of Venturi fertilizer applicator series ［J］.China Rural Water and Hydropower, 2006(5): 14-16. (in Chinese)［9］孙艳琦,牛文全. 文丘里管结构参数对其水力性能的影响［J］. 西北农林科技大学学报:自然科学版, 2010, 38 (2):211-218.Sun Yanqi, Niu Wenquan. Effects of Venturi structural parameters on the hydraulic performance ［J］. Journal of Northwest A＆F University:Nat Sci Ed,2010, 38 (2):211-218. (in Chinese)［10］邱振宇,鲍安红. 施肥器结构参数对施肥浓度影响的数值研究［J］.农机化研究, 2012,34(4): 42-45.Qiu Zhenyu,Bao Anhong. Fertilization numerical studies on the impact of structure parameters on fertilizer concentration ［J］. Journal of Agricultural Mechanization Research, 2012,34 (4): 42-45. (in Chinese)［11］Yan H J, Chen Y, Chu X Y, et al. Effect of structural optimization on performance of Venturi injector［C］／／IOP Conference Series: Earth and Environmental Science. ［S.L.］:IOP Publishing, 2012, 15(7): 072014.［12］Sun Y, Niu W. Simulating the effects of structural parameters on the hydraulic performances of Venturi tube［J］. Modelling and Simulation in Engineering, 2012, 2012: 1-7.［13］王淼,黄兴法,李光永. 文丘里施肥器性能数值模拟研究［J］. 农业工程学报,2006,22(7): 27-31.Wang Miao, Huang Xingfa, Li Guangyong. Numerical simulation of characteristics of Venturi injector ［J］. Transactions of the CSAE, 2006, 22(7):27-31.(in Chinese)［14］严海军,初晓一,王敏,等. 微灌系统文丘里施肥器吸肥性能试验［J］. 排灌机械工程学报， 2010,28(3): 251-255.Yan Haijun, Chu Xiaoyi, Wang Min,et al. Injection performance of Venturi injector in microirrigation system ［J］. Journal of Drainage and Irrigation Machinery Engineering, 2010,28(3): 251-255. (in Chinese) |
|
|
|
