|
|
|
| Investigation on parametric design of centrifugal pump blade |
| Zhang Renhui,Yang Junhu,Li Rennian |
| (School of Energy and Power Engineering,Lanzhou University of Technology,Lanzhou,Gansu 730050,China) |
|
|
|
|
Abstract To overcome the inconvenience of traditional centrifugal pump impeller design,the quartic Bezier curve is used to design the meridional plane and blade profile.The control method of these curves is introduced in detail,which can be integrated into the pump design theory.The partial differential equation is used to disperse the meridional plane and generate the centrifugal pump blade surface,then the blade design problem is transformed into the boundary-value problem of partial differential equation.While the boundary condition of the partial differential equation is determined,the blade can be formed.Solving the boundary-value problem with numerical method,we can get the numerical model of pump blade.By importing these datum of blade into the CAD software,we can get the 3-D model of impeller.The parametric design of centrifugal impeller is achieved,and the calculation case shows that the inverse design method of centrifugal pump blade presented here is rational.
|
|
Received: 24 May 2009
Published: 30 September 2009
|
|
|
|
| [1]杨敏官,刘栋,贾卫东,等.离心泵叶轮内部三维湍流流动的分析[J].江苏大学学报:自然科学版,2006,27(6):524-527.Yang Minguan,Liu Dong,Jia Weidong,et al.Analysis on turbulent flow in impeller of centrifugal pump[J].Journal of Jiangsu University:Natural Science Edition,2006,27(6):524-527.(in Chinese)[2]汤方平,刘超,周济人,等.离心式叶轮内紊流流场数值分析及PIV测试[J].排灌机械,2004,22(3):5-10.Tang Fangping,Liu Chao,Zhou Jiren,et al.Numerical simulation and PIV measurement about turbulent flow field in centrifugal impeller[J].Drainage and Irrigation Machinery,2004,22 (3):5-10.(in Chinese)[3]沈天耀.离心叶轮的内流理论基础[M].杭州:浙江大学出版社,1986.[4]苏步清,华宣积,忻元龙.实用微分几何引论[M].北京:科学出版社,1998.[5]Bloor M I G,Wilson M J.Generating blend surfaces using partial differential equations[J].Computer Aided Design,1989,21(3):165-171.[6]Bloor M I G,Wilson M J.Using partial differential equations to generate free form surfaces[J].Computer Aided Design,1990,22 (4):202-212.[7]Bloor M I G,Wilson M J.An analytic pseudo spectral method to generate a regular 4-sided PDE surface patch[J].Computer Aided Geometric Design,2005,22(3):203-219. |
|
|
|
