|
|
|
Abstract The most important influence factor of ejecting performance for eject pump is area proportion. Experiment was carried out to research the relationship between area proportion and ejecting performance of jet pumps under different system pressure. The water quantity, ejecting air quantity and ejecting coefficient of the jet pumps with different nozzle sizes and area proportions were tested through experiment under the condition of different access water pressure, and the experimental values of ejecting air of eject pumps with different structure parameters in different conditions were obtained. The experimental results showed that the maximum value of quantity of water and ejecting air were 1 940 L/h and 1 090 L/h of the jet pump with 5.5 mm nozzle and 0.40 MPa system pressure, respectively, and the maximum value of quantity of water and ejecting air were 1 240 L/h and 1 280 L/h of the jet pump with 4.0 mm nozzle and 0.60 MPa system pressure, respectively. The ejecting coefficient increased with the access water pressure increasing. When a certain pressure was reached, the ejecting coefficient was invariable. When the system pressure was 0.40 MPa, the ejecting coefficients of jet pump with 5.5 mm and 4.0 mm nozzle were 0.56 and 1.07, respectively. Quantity of ejecting air and ejecting coefficient needs to be paid attention to in designing and applying automatic airejecting twophase flow jet pumps.
|
|
Received: 24 May 2010
Published: 30 November 2010
|
|
|
|
| [1]Zeng Danling.Sound velocity in vapor-liquid two-phase medium[C]//Proceedings of the Second International Symposium on Multi-phase Flow and Heat Transfer.Xi'an:[s.n.],1989:11-18.[2]Zeng Danling,Zhao Liangju.Sound velocity in vaporliquid two-phase flow system[C]//Proceedings of ICECA Conference.Wuhan:ICECA,2001:18-20.[3]赵良举,曾丹苓,袁鹏,等.汽液两相混合物的加速流动与激波的热力学分析[J].工程热物理学报,2001,22(3):284-286.Zhao Liangju,Zeng Danling,Yuan Peng,et al.The thermodynamic analysis of the supersonic flow and shock wave of two-phase flow[J].Journal of Engineering Thermophysics,2001,22(3):284-286.(in Chinese)[4]Deberne N,Leone J F,Duque A,et al.A model for calculation of steam injector performance[J].International Journal of Multiphase Flow,1999,25(5):841-855.[5]刘建瑞,周贵平,施卫东,等.新型高效自吸喷灌泵的设计与试验[J].排灌机械,2006,24(4):1-4.Liu Jianrui,Zhou Guiping,Shi Weidong,et al.Design and test of self-priming and flow ejecting spray pump[J].Drainage and Irrigation Machinery,2006,24(4):1-4.(in Chinese)[6]刘建瑞,施卫东,叶忠明,等.离心泵射流自吸装置的研究[J].农业工程学报,2006,22(1):89-92.Liu Jianrui,Shi Weidong,Ye Zhongming,et al.Jetted self-priming set for the centrifugal pump[J].Transactions of the CSAE,2006,22(1):89-92.(in Chinese)[7]Falcone A M,Cataldo J C.Entrainment velocity in an axisymmetric turbulent jet[J].Journal of Fluids Engineering,2003,125(4):620-627.[8]向清江,袁寿其,何培杰,等.液气射流泵内部流场的数值计算[J].江苏大学学报:自然科学版,2008,29(3):231-235.Xiang Qingjiang,Yuan Shouqi,He Peijie,et al.Numerical simulation of liquid jet gas pump[J].Journal of Jiangsu University:Natural Science Edition,2008,29(3):231-235.(in Chinese)[9]赵静野,孙厚钧,高军.引射器基本工作原理及其应用[J].北京建筑工程学院学报,2000,16(4):12-15.Zhao Jingye,Sun Houjun,Gao Jun.Basic principles and applications of ejector[J].Journal of Beijing Institute of Civil Engineering and Architecture,2000,16(4):12-15.(in Chinese)[10]陆宏圻.喷射技术理论及应用[M].武汉:武汉大学出版社,2004:272-276. |
|
|
