|
|
|
| Design of sliding bearing wear monitoring sensor in magnetic drive pumps |
| ZENG Pei1*, ZENG Hao2, XU Defu3, GOU Xiaojun3, LI Yongliang4, YE Zizao5 |
| 1. National Research Center of Pumps, Jiangsu University, Zhenjiang, Jiangsu 212013, China; 2. KYB Industrial Machinery(Zhen Jiang)Ltd, Zhenjiang, Jiangsu 212000, China; 3. Jiangsu Xintengyu Fluid Equipment Manufacturing Co. Ltd., Shuyang, Jiangsu 223600, China; 4. Zhejiang Windey Co. Ltd., Hangzhou, Zhejiang 310012, China; 5. Zhejiang Tengyu Pump & Valve Equipment Co. Ltd., Wenzhou, Zhejiang 325006, China |
|
|
|
|
Abstract A novel sensor was designed to realize real-time monitoring of sliding bearing wear in magnetic drive pumps. Based on the structure of magnetic drive pumps, a special sensor structure in which the curved surface measurement was converted into a plane measurement with a detecting wheel was put forward. The detecting wheel made of an anti-corrosion treated magnetic material was fixed on the inner magnetic rotor, and the detecting sensor was installed in the ring-shaped recessed groove in the containment shell. The sensor was a container with a flat detecting plane, which was opposite to the detecting wheel in the axial direction. The sensor was composed of magnet, magnetic flux concentrator and its forehead as well as the Hall IC. The detecting sensor and the detecting wheel form a closed magnetic circuit. Through magnetic circuit analysis, the magnetic circuit was simplified. After the sensor size was decided, all the parameters of the magnetic circuit such as the magnetic permeability of the magnet, the magnetomotive force of the magnet, and the cross-sectional area of the magnetic circuit were constant, thus the output voltage of the Hall IC was related to the change in the area of the magnetic flux concentrator forehead, So, it was associated with radial displacement δ of the detecting wheel. The resolution was 0.122 mm, the linearity was 0.1-2.3, the sensitivity of the sensor was 10mV/mm and the linearity of the displacement characteristic curve of the sensor was improved. The sensor designed in this paper has certain application significance for real-time monitoring of sliding bearing wear in magnetic drive pumps.
|
|
Received: 10 July 2018
|
|
|
|
| [1]CLARK D. Common industry myths about magnetic drive pumps [J]. World pumps, 2004(4):20-23.[2]LAWINGER M. The current state of magnetic drive pumping [J]. Pumps and systems, 2007, 4:78-79.[3]BURGERR N D L, GHELA P N, MULDER A O, et al.Tribological failure analysis of a magnetic drive pump[J]. Engineering failure analysis, 2009, 16: 1501-1509.[4]李士雄,李涛.轴承监视器在屏蔽泵上的应用[J]. 化工设备与管道,2010,47(1):23-26. LI Shixiong,LI Tao. Application of bearing monitor in non-seal pumps[J].Process equipment and piping,2010,47(1):23-26.(in Chinese)[5]王玉良,邓子龙,赵章荣.国外磁传动无密封泵技术发展概况[J]. 石油机械,2003,41(4):52-54. WANG Yuliang, DENG Zilong, ZHAO Zhangrong. Development of foreign magnetic drive non-sealing pump technology[J]. China petroleum machinery, 2003,41(4):52-54.(in Chinese)[6]王玉良.磁力泵面临的技术问题及对策[J].石油化工设备技术, 1998, 19(1):31-33. WANG Yuliang. The existing technical problem and counter measure for magnetic pump[J]. Petro-chemical equipment technology, 1998, 19(1):31-33.(in Chinese)[7]袁铁军,曾培,孔繁余.Excel, Matlab, Neruoshell在磁力泵监测系统中的协同应用[J].农机化研究,2006(4):176-178. YUAN Tiejun, ZENG Pei,KONG Fanyu. The applica-tion of Excel,Matlab,Neruoshell on establishing mag-netic drive pump observation system[J]. Journal of agricultural mechanization research, 2006(4):176-178.(in Chinese)[8]袁铁军,曾培,孔繁余.多个神经网络模型在磁力泵滑动轴承监测系统中的应用[J].机床与液压,2007,35(2):159-161. YUAN Tiejun, ZENG Pei,KONG Fanyu. The applica-tion of multiple neural network model to the monitoring system of magnetic drive pump sliding bearing[J]. Machine tool and hydraulics,2007,35(2):159-161.(in Chinese)[9]曾培,叶子兆,李永亮,等.磁力泵滑动轴承磨损检测[J].排灌机械工程学报,2010,28(5):412-416. ZENG Pei, YE Zizhao, LI Yongliang, et al. Slide bea-ring wear monitoring on magnetic drive pump[J]. Journal of drainage and irrigation machinery enginee-ring, 2010,28(5):412-416.(in Chinese) |
|
|
|
