|
|
|
| Influence of feeding method on feed quantity of screw feeder |
| SHI Yunfei1, ZHANG Xiliang1*, XU Yunfeng2, CUI Shoujuan1 |
| 1. School of Mechanical Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China; 2. Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education, Jiangsu University, Zhenjiang, Jiangsu 212013, China |
|
|
|
|
Abstract In order to study the influence of feeding mode on the performance of single screw feeding, based on screw feeding theory and using EDEM software, a screw feeding model with discharging device was established. The screw feeding process of soybean particles with 5.5 mm diameter was simulated under 60 r/min and 120 r/min, respectively. The total energy loss in the screw feeder at the two speeds and the difference of the feeding quantity were compared, and the trajectory of the particle group movement was analyzed. Numerical analysis shows that the mechanism has low initial energy consumption, small feeding fluctuation and less relative action between particles in dynamic feeding mode. Meanwhile, the mechanism has high initial energy consumption, big feeding fluctuation and more relative action between particles in static feeding mode. The research provides theoretical and numerical simulation basis for the feed mode of screw feeder.
|
|
Received: 24 August 2018
|
|
|
|
| [1]石云飞,张西良,徐云峰,等. 加料机单、双头螺旋对颗粒群接触力的影响[J]. 江苏大学学报:自然科学版, 2019, 40(1): 76-81. SHI Yunfei,ZHANG Xiliang,XU Yunfeng, et al. Effect of single/double screw feeder on contact force of particles[J].Journal of Jiangsu University: natural science edition, 2019, 40(1): 76-81.(in Chinese)[2]张西良, 马奎, 王辉, 等. 颗粒尺寸对螺旋加料机定量加料性能的影响[J]. 农业工程学报, 2014,30(5):19-27. ZHANG Xiliang, MA Kui, WANG Hui, et al. Effect of particle size on precision dosing of screw feeder[J]. Transactions of the CSAE, 2014, 30(5): 19-27.(in Chinese )[3]崔守娟,张西良,徐云峰,等. 基于 LS-SVM 的螺旋定量加料预测及试验研究[J]. 排灌机械工程学报,2016,34(12):1099-1104. CUI Shoujuan,ZHANG Xiliang,XU Yunfeng,et al.Experimental research and prediction of screw dosing based on least squares support vector machine[J].Journal of drainage and irrigation machinery engineering, 2016, 34(12):1099-1104.(in Chinese)[4]张志洋,李红,陈超,等. 溶解混施水肥一体化装置施肥性能试验研究[J]. 排灌机械工程学报, 2018, 36(11): 1115-1119. ZHANG Zhiyang,LI Hong,CHEN Chao, et al. Experiment on fertilization performance of dissolved and mixed water-fertilizer integrated device[J]. Journal of drainage and irrigation machinery engineering, 2018, 36(11): 1115-1119.(in Chinese)[5]TALEBI K, MEMARIAN H, ROSTAMI J, et al. Mode-ling of soil movement in the screw conveyor of the earth pressure balance machines(EPBM)using compu-tational fluid dynamics[J]. Tunnelling & underground space technology incorporating trenchless technology research, 2015, 47:136-142.[6]NACHENIUS R W, WARDT T A V D, Ronsse F, et al. Re-sidence time distributions of coarse biomass particles in a screw conveyor reactor[J]. Fuel processing technology, 2015, 130(130):87-95 [7]向少学, 王小乐. 基于EDEM仿真的水平螺旋输送机输送机理分析研究[J]. 港口装卸, 2015(5):49-51. XIANG Shaoxue, WANG Xiaole. Analysis of the transportation mechanism of horizontal screw conveying based on EDEM[J]. Port operation, 2015(5):49-51.(in Chinese)[8]刘伟立, 卫红波. 基于EDEM软件的螺旋输送机仿真及分析[J]. 机械工程师, 2015(10):121-123. LIU Weili, WEI Hongbo. Simulation and analysis of screw conveyer based on EDEM software[J]. Mechanical engineer, 2015(10):121-123.(in Chinese)[9]于瑞江, 汤晓华, 张玉玲. 基于离散元法的水平螺旋输送机仿真模拟与分析[J]. 电子世界, 2015(21):168-170. YU Ruijiang, TANG Xiaohua, ZHANG Yuling. Simulation and analysis of the horizontal screw conveyor based on the discrete element method[J]. Electronics world, 2015(21):168-170.(in Chinese)[10]宋欢, 李勇, 马迎亚, 等. 基于离散元法的定量螺旋输送机的优化研究[J]. 起重运输机械, 2016(2):30-34. SONG Huan, LI Yong, MA Yingya, et al. Optimal study on rationed screw conveyor based on discrete element method[J]. Hoisting and conveying machinery, 2016(2):30-34.(in Chinese)[11]李勇, 刘伟冬. 基于EDEM软件的单螺杆离散元模拟仿真与分析[J]. 起重运输机械, 2017(4):78-81. LI Yong, LIU Weidong. Simulation and analysis of single screw discrete element based on EDEM software[J]. Hoisting and conveying machinery, 2017(4):78-81(in Chinese)[12]郭宇航. 基于EDEM不同叶片形状垂直螺旋输送机的结构设计[J]. 内燃机与配件, 2017(24):37-38. GUO Yuhang.Structural design of vertical helical conveyor with different blade shapes based on EDEM[J]. Internal combustion engine & parts, 2017(24):37-38.(in Chinese)[13]万昌江, 姜松. CAD 在碾米机零部件设计中的应用[J].粮食与饲料工业, 1997(8):10-12. WAN Changjiang, JIANG Song. Application of computer aided design(CAD)for designing components in rice whitener[J]. Food and feed industry, 1997(8):10-12.(in Chinese)[14]BOAC J M, CASADA M E, MAGHIRANG R G, et al. Material and interaction properties of selected grains and oilseeds for modeling discrete particles.[J]. Tran-sactions of the ASABE, 2010, 53(4):1201-1216. |
|
|
|
