|
|
Analysis of gas-liquid two-phase flow in oxidation ditch with fine bubbles based on PBM model |
YANG Yahong, LIU Lingang*, ZHAO Yang, ZHU Tianxu |
College of Civil Engineering, Lanzhou University of Technology, Lanzhou, Gansu 730050, China |
|
|
Abstract It is difficult to model fine bubble aeration in multiphase flow simulations for oxidation ditch with fine bubbles. In this work,the population balance model(PBM)was used by employing FLUENT and the model feasibility in fine bubble aeration was validated. Then, the gas-liquid flow in an oxidation ditch with fine bubbles was studied in Fluent. The results show that the velocity based on PBM model agrees better with the experimental data than the velocity based on the traditional model, i.e. the average error of the former is less than the latter. Thus, the new method coupled with PBM model can reduce the error caused by simplified aeration models.
|
Received: 20 October 2016
|
|
|
|
[1]胡鹏, 刘玲花, 吴雷祥,等. 微孔曝气国内外研究进展及趋势分析[J]. 环境工程, 2015, 33(2):58-61. HU Peng, LIU Linghua,WU Leixiang,et al. Current research progress and trend on fine pore aeration[J].Environmental engineering, 2015, 33(2):58-61.(in Chinese)[2]KARPINSKA A M, DIAS M M, RUI A R B, et al. Modeling of the hydrodynamics and energy expenditure of oxidation ditch aerated with hydrojets using CFD codes[J]. Water quality research journal of Canada, 2015, 50(1):83-93.[3]PENG S M, CHEN Y D, GUO W Q, et al. The application of computational fluid dynamics(CFD)in wastewater biological treatment field[J]. Applied mechanics & materials, 2014, 507(2):711-715.[4]MOULLEC Y L, POTIER O, GENTRIC C, et al. Flow field and residence time distribution simulation of a cross-flow gas-liquid wastewater treatment reactor using CFD[J]. Chemical engineering science, 2008, 63(9):2436-2449.[5]庄健,王洪臣,齐鲁,等.孔径对微孔曝气充氧性能的影响[J].环境工程学报, 2014, 8(5):1723-1726. ZHUANG Jian,WANG Hongchen, QI Lu,et al. Effects of pore diameter on oxygenation performance in fine pore aeration[J].Chinese journal of environmental engineering, 2014, 8(5):1723-1726.(in Chinese)[6]邵杰, 李晓花, 郭振江,等. 不同湍流模型在管道流动数值模拟中的适用性研究[J]. 化工设备与管道, 2016, 53(4):66-71. SHAO Jie,LI Xiaohua,GUO Zhenjiang,et al. Research of applicability of several turbulence models in numerical simulation for flow in pipeline [J]. Process equipment & piping,2016, 53(4):66-71.(in Chinese)[7]于江忠,单继宏,孙毅,等.微孔曝气器膜片最优开孔数的数值模拟[J].机械制造, 2014, 52(1):10-12. YU Jiangzhong,SHAN Jihong,SUN Yi,et al.Numerical simulation of optimal number of holes of fine bubble diffuser[J].Mechinery,2014, 52(1):10-12.(in Chinese)[8]LIANG X F, PAN H, SU Y H, et al. CFD-PBM approach with modified drag model for the gas-liquid flow in a bubble column[J]. Chemical engineering research & design, 2016, 112:88-102.[9]WANG T, WANG J, JIN Y. A CFD-PBM coupled model for gas-liquid flows[J]. Aiche journal,2005,52(1):125-140.[10]RAMKRISHNA D, MAHONEY A W. Population balance modeling. promise for the future[J]. Chemical engineering science, 2002, 57(4):595-606.[11]肖柏青,张法星,戎贵文.气泡尺寸对曝气池内气液两相流数值模拟的影响[J].中国环境科学, 2012,32(11):2006-2010. XIAO Baiqing,ZHANG Faxing,RONG Guiwen. Influence of the bubble size on numerical simulation of the gas-liquid flow in aeration tanks[J].China environmental science, 2012, 32(11):2006-2010.(in Chinese)[12]程军明, 吴伟烽, 聂娟,等. 气泡在静水中上升破裂产生射流特性的数值模拟[J]. 江苏大学学报(自然科学版), 2014, 35(5):513-517. CHENG Junming,WU Weifeng,NIE Juan,et al.Numerical simulation of bubbles rising and bursting under buoyancy effect in static water[J]. Journal of Jiangsu University(natural sciences edition),2014,35(5):513-517.(in Chinese)[13]LIU Y, HINRICHSEN O. Study on CFD-PBM turbulence closures based on k-ε, and Reynolds stress models for heterogeneous bubble column flows[J]. Computers & fluids, 2014, 105(105):91-100.[14]郑建祥, 许帅, 王京阳. 基于 CFD-PBM积分矩量法旋风分离器中颗粒聚团的数值模拟[J]. 流体机械, 2016, 44(11):30-35. ZHENG Jianxiang, XU Shuai, WANG Jingyang. Numerical simulation of particle aggregation in cyclone separator using quadrature method of moments in CFD-PBM[J]. Fluid machinery, 2016, 44(11):30-35.(in Chinese)[15]李孟,李向阳,王宏智,等.鼓泡塔气液两相流不同曳力模型的数值模拟[J].过程工程学报,2015, 15(2):181-189. LI Meng,LI Xiangyang,WANG Hongzhi,et al. Numerical simulation of gas-liquid two-phase flow in a bubble column with various drag models[J].The Chinese journal of process engineering,2015,15(2):181-189.(in Chinese)[16]曾祥专,张金松,卢欢亮,等.含转刷与推进器的全尺寸氧化沟流场模拟与DO分布[J].中国给水排水,2014,30(9):104-108. ZENG Xiangzhuan, ZHANG Jinsong, LU Huanliang, et al. Flow field simulation and do distribution in full-scale oxidation ditch with brushes and propellers[J].China water & wastewater,2014,30(9):104-108.(in Chinese)[17]陈斌,王炳祺,张华,等.推流器布置对氧化沟流场特性的影响[J].排灌机械工程学报, 2016,34(3):227-231. CHEN Bin,WANG Binqi,ZHANG Hua,et al. Effects of propeller layout position on flow characteristics in oxidation ditch[J].Journal of drainage and irrigation machinery engineering,2016,34(3):227-231.(in Chinese)[18]庞洪涛,施汉昌,施慧明,等.气升式氧化沟流动特性的中试研究[J].中国环境科学, 2009, 28(12): 1057-1061. PANG Hongtao, SHI Hanchang, SHI Huiming, et al. Flow characteristics of a pilot scale airlift oxidation ditch[J]. China environmental science,2009,28(12): 1057-1061.(in Chinese) |
|
|
|