|
|
Hydrodynamic and structural characteristics of horizontal axis current turbine under different pitch angles |
LIU Heng, WANG Wenquan, YAN Yan |
Faculty of Civil Engineering and Mechanics, Kunming University of Science and Technology, Kunming, Yunnan 650500, China |
|
|
Abstract Based on the results of a two-dimensional hydrofoil obtained by computational fluid dynamics(CFD), the best angle of attack for the hydrofoil determined firstly by means of the lift to drag ratio chart at various angles of attack. The three-dimensional blades of a horizontal axis current turbine with 20 kW rated power were designed by using the Wilson method in Matlab. The hydrodynamic characteristics of the current turbine, such as the power, moment and axial thrust coefficients were predicted using CFD under different pitch angles and tip speed ratios. The static structural characteristics were also calculated using finite element method under various hydro-loads, the stress and strain in the blades were analyzed. The results showed that increasing pitch angle in the range of 1°-5° could be helpful to reduce the starting moment at a low tip speed ratio, moreover, increasing pitch angle can reduce the axial load, deformation and stress when the axial flow velocity is too high. The power coefficient of the turbine can reach to 0.301 and its structure can meet the requirements of material strength under the optimal operating condition. These achievements can be favourable to the design and optimization of marine current turbines.
|
Received: 11 October 2016
|
|
|
|
[1]李全林.新能源与可再生能源[M]. 南京:东南大学出版社,2008:13-28.[2]卢平.能源与环境概论[M]. 北京:中国水利水电出版社,2011:12-19.[3]KHAN M J, BHUYAN G, IQBAL M T, et al. Hydrokinetic energy conversion systems and assessment of horizontal and vertical axis turbines for river and tidal applications: a technology status review[J]. Applied energy, 2009,86(10): 1823-1835.[4]BAHAJ A S, MYERS L E. Fundamentals applicable to the utilisation of marine current turbines for energy production[J]. Renewable energy, 2003,28(14):2205-2211.[5]王树杰. 柔性叶片潮流能水轮机水动力学性能研究[D]. 青岛:中国海洋大学,2009.[6]王树杰, 盛传明, 袁鹏, 等. 潮流能水平轴水轮机湍流模型研究初探[J]. 中国海洋大学学报(自然科学版), 2014,44(5):95-100,113. WANG Shujie, SHENG Chuanming, YUAN Peng, et al. A study on turbulence models of horizontal axis tidal current turbines[J]. Periodical of Ocean University of China(natural science edition), 2014,44(5):95-100,113.(in Chinese)[7]JO C H, YIM J Y, LEE K H, et al. Performance of horizontal axis tidal current turbine by blade configuration[J]. Renewable energy, 2012,42(C):195-206.[8]JO C H, KIM D Y, RHO Y H, et al. FSI analysis of deformation along offshore pile structure for tidal current power[J]. Renewable energy, 2013,54(C):248-252.[9]XU Quankun, LI Wei, LIN Yonggang, et al. Investigation of the performance of a stand-alone horizontal axis tidal current turbine based on in situ experiment[J]. Ocean engineering, 2016,113:111-120.[10]DE JESUS HENRIQUES T A, HEDGES T S, OWEN I, et al. The influence of blade pitch angle on the performance of a model horizontal axis tidal stream turbine operating under wave-current interaction[J]. Energy, 2016,102:166-175.[11]HUANG Bin, NAKANISHI Y, KANEMOTO T. Numerical and experimental analysis of a counter-rotating type horizontal-axis tidal turbine[J]. Journal of mechanical science and technology, 2016,30(2):499-505.[12]HUANG Bin, KANEMOTO T. Multi-objective numerical optimization of the front blade pitch angle distribution in a counter-rotating type horizontal-axis tidal turbine[J]. Renewable energy, 2015,81(C):837-844.[13]NORUZI R, VAHIDZADEH M, RIASI N. Design, analysis and predicting hydrokinetic performance of a horizontal marine current axial turbine by consideration of turbine installation depth[J]. Ocean engineering, 2015,108:789-798.[14]乔永喜. 水平轴潮流能发电装置基础冲刷及支撑结构的优化设计[D]. 青岛:中国海洋大学,2013.[15]盛传明. 复杂工况下潮流能水平轴水轮机水动力性能研究及叶片优化[D]. 青岛:中国海洋大学,2014. |
|
|
|