|
|
|
| Numerical analysis of internal flow of abrasive entrained waterjet nozzle |
| LONG Xinping1,2, LIU Qi1,2, RUAN Xiaofeng1,2, CHEN Zhengwen3, XUE Shengxiong3, WU ziquan4 |
| 1.School of Power and Mechanical Engineering, Wuhan University, Wuhan, Hubei 430072, China; 2.Key Lab of Hubei Province oratory Waterjet for Theory and New Technology, Wuhan, Hubei 430072, China; 3.Hefei General Machinery Research Institute, Hefei, Anhui 230031, China; 4.Shenyang All-Powerful Science and Technology Stock Co.Ltd., Shenyang, Liaoning 110179, China |
|
|
|
|
Abstract Abrasive entrained waterjet nozzle is a core component of high-pressure abrasive waterjet equipment. In order to investigate the internal flow and particle movement in the nozzle, numerical simulation of the multiphase flow in the nozzle was conducted based upon the Euler-Lagrange approach, and Discrete Particle Method was adopted to calculate the trajectories of abrasive particles by taking the shape factor of particles and the energy loss due to the collision with the wall into consideration. The results indicate that the air phase near the entrance of focusing tube has a comparatively large tangential velocity which will drag the particles to conduct circumferential movement, and the resulting centrifugal force will enhance the possibility of the collision of the particles with the local wall which can enhance the erosion in this area. A longer focusing tube will contribute to the dissipation of the circumferential movement and guarantee the particles ejecting from focusing tube without large tangential velocity. The decease of particle shape factor will enhance the acceleration of abrasive particles. The particle inlet velocity has little impact on the particle outlet velocity in the current nozzle model. The results are of importance to gaining a deep insight of the nozzle internal flow and nozzle optimization.
|
|
Received: 30 January 2016
|
|
|
|
| [1]李晓红,卢义玉,向文英. 水射流理论及在矿业工程中的应用[M]. 重庆: 重庆大学出版社, 2006.[2]薛胜雄, 陈正文,韩彩红,等.高端超高压水切割机的水平标志[J]. 流体机械, 2015,43(10): 37-41. XUE Shengxiong, CHEN Zhengwen, HAN Caihong,et al. Sign of the high-end ultra-high pressure waterjet cutting machine development level[J]. Fluid machinery, 2015,43(10): 37-41.(in Chinese)[3]杨雪龙,龙新平,肖龙洲,等. 不同湍流模型对射流泵内部流场模拟的影响 [J]. 排灌机械工程学报, 2013, 31(2): 98-102. YANG Xuelong, LONG Xinping, XIAO Longzhou, et al. Influence of different turbulence models on simulation of internal flow field of jet pump [J]. Journal of drainage and irrigation machinery engineering, 2013, 31(2): 98-102.(in Chinese)[4]TAZIBT A, PARSY F, ABRIAK N. Theoretical analysis of the particle acceleration process in abrasive water jet cutting [J]. Computational materials science, 1996, 5(1/2/3): 243-254.[5]NARAYANAN C, BALZ R, WEISS D A, et al. Modelling of abrasive particle energy in water jet machining[J]. Journal of materials processing technology, 2013, 213(12):2201-2210.[6]UMBERTO P, MARIA C D. Three-dimensional CFD simulation of two-phase flow inside the abrasive water jet cutting head[J]. International journal for computational methods in engineering science & mechanics, 2008, 9(5):300-319.[7]潘峥正,万庆丰,雷玉勇,等.基于后混合式磨料水射流磨料颗粒运动研究[J]. 机床与液压,2014, 42(9): 109-112. PAN Zhengzheng, WAN Qingfeng, LEI Yuyong, et al. Research on motion of abrasive in post-mixed abrasive water jet[J]. Machine tool & hydraulics, 2014, 42(9): 109-112.(in Chinese)[8]张滕飞,邓松圣,陈晓晨,等.后混磨料射流颗粒运动仿真和实验分析[J]. 重庆理工大学学报(自然科学版),2015,29(2): 57-60. ZHANG Tengfei, DENG Songsheng, CHEN Xiaochen, et al. Simulation and analysis of post-mixed abrasive water jet particle trajectory[J]. Journal of Chongqing University of Technology(natural science edition), 2015,29(2): 57-60.(in Chinese)[9]MORSI S A, ALEXANDER A J. An investigation of particle trajectories in two-phase flow systems[J]. Journal of fluid mechanics, 1972, 55(2):193-208.[10]HAIDER A, LEVENSPIEL O. Drag coefficient and terminal velocity of spherical and nonspherical particles[J].Powder technology, 1989, 58(1):63-70.[11]FORDER A, THEW M, HARRISON D. A numerical investigation of solid particle erosion experienced within oilfield control valves[J]. Wear, 1998, 216(2):184-193.[12]NANDURI M, TAGGART D G, KIM T J. The effects of system and geometric parameters on abrasive water jet nozzle wear[J]. International journal of machine tools & manufacture, 2002, 42(5):615-623. |
|
|
|
