|
|
|
| Cutting thickness model comparison considering cutting tool deflection in micro milling |
| Liao Dong |
| Mathematical and Statistical College, Nanyang Normal University, Nanyang, Henan 473000, China |
|
|
|
|
Abstract To use a more accurate method to simulate the trajectory of the tip of micro milling process,and decrease the micro cutter tip movement errors. This paper describes the use of trochoidal tip trajectory, and considering the impact on the tool deflection process. Besides, an improved theoretical model was established for the instantaneous chip thickness, the course focused on the tool rotation, the tool deflection and the impact on the amount of feed per tooth momentary cutting thickness, meanwhile, a variety of different cutting thickness models were compared. The simulation results show that the thickness from the model of the instantaneous cutting thickness considering cutting tool deflection was very close to the real trajectory, which verified the accuracy of the improved model. In addition, the thickness of the instantaneous cutting increases with the increases of cutting tool deflection, the greater the feed amount, the more significant the impact.
|
|
Received: 29 August 2014
|
|
|
|
| [1]闫雪, 陶华, 蔡晋, 等. 基于真实刀刃轨迹的立铣刀切削厚度模型[J]. 机械工程学报,2011,47(1):182-186. Yan Xue,Tao Hua,Cai Jin,et al. Model of the instantaneous undeformed chip thickness in milling based on real tooth trajectory[J]. Journal of Mechanical Engineering,2011,47(1):182-186.(in Chinese)[2]张棉好,朱春耕,刘智强,等. 微铣削切削厚度模型的研究[J]. 机械制造,2010, 48(553): 51-53. Zhang Mianhao,Zhu chungeng,Liu Zhiqiang,et al. Study on micro milling cutting thickness model[J]. Machinery, 2010, 48(553): 51-53.(in Chinese)[3]许鸿利. 铣削加工中尺寸效应对切削系数影响的探讨[D].台湾:国立成功大学机械工程学系, 1991.[4]Kang I S,Kim J S,Kim J H,et al. A mechanistic model of cutting force in the micro end milling process[J]. Journal of Materials Processing Technology, 2007,187: 250-255.[5]Bao W Y, Tansel I N.Modeling micro-end-milling operations. Part1:analytical cutting force model [J].International Journal of Machine Tool & Manufacture, 2000, 40(15):2155-2174.[6]赵岩. 微细铣削工艺基础与实验研究[D]. 哈尔滨:哈尔滨工业大学机电工程学院,2008.[7]Li Chengfeng, Lai Xinmin, Li Hongtao, et al. Modeling of three-dimensional cutting forces in micro-end-milling[J]. Journal of Micromechanics and Micro Engineering, 2007, 17:671-678.[8]Kline W A,Devor R E.The effect of runout on cutting geometry and forces in end milling[J].Journal of Engineering for Industry, 1983, 23(2):123-140.[9]Wang J J,Liang S Y.Chip load kinematic in milling with radial curer runout[J].Journal of Engineering for Industry, 1996,118(1): 1-13.[10]Rivire-Lorphevre E,Filippi E.Mechanistic cutting force model parameters evaluation in milling taking cutter radial runout into account[J].International Journal of Advanced Manufacturing Technology, 2009, 45(1/2): 8-15.[11]吴世娟, 张焯康.车刀刀尖高度对零件加工质量的影响[J]. 装备制造技术,2007(8):122-123. Wu Shijuan, Zhang Zhuokang. Effects on quality of the parts caused by the tallness of lathe tool tip[J]. Equipment Manufacturing Technology, 2007(8):122-123.(in Chinese) |
|
|
|
