|
|
|
|
Effect law of axial clearance on stock pump performance |
| Li Hong,Feng Shifeng,Wang Tao,Zhuang Haifei,Wang Chao |
| (Research Center of Fluid Machinery Engineering and Technology,Jiangsu University,Zhenjiang,Jiangsu 212013,China) |
|
|
|
|
Abstract In order to research the effect of axial clearance on hydraulic performance of a stock pump,3D turbulent numerical simulation was carried out for a semi-open centrifugal stock pump with three kinds of axial clearances by the computational fluid dynamics software Fluent under the conditions of 0.7 to 1.3 times of design flow rate.The simulations were conducted on mediums of clean water and pulp fiber suspensions,respectively,and in which the standard k-ε turbulent model and SIMPLEC algorithm were adopted.The simulation results show that the head and efficiency both decrease with the increasing of clearance when taking clean water as media.The velocity distribution in impeller and clearance is in accordance with that of clean water when taking pulp fiber suspensions as medium.The method of properly increasing the blade outlet angle is proposed to reduce the low-velocity regions,while the latter causes flow distortion at the condition that the volume fraction of pulp fiber suspensions is of 2%.When the rigidity effect is of no more action due to the clearance increases,the overall performance of the pump would be decreased.Due to the impact of axial clearance,the pressure and velocity between the suction side and pressure side of blades are of great variation,and the transmission capacity will increase for a small axial clearance and a certain volume fraction of pulp fiber.Compared with test data,it shows that the semi-open pulp stock pump will work well when tip clearance is 1.0 mm,and the numerical simulated results agree with that of the tested.
|
|
Received: 15 November 2010
Published: 30 May 2011
|
|
|
|
| [1]Cui Heping,Gracei J R.Flow of pulp fiber suspension and slurries, A review[J].International Journal of Multiphase Flow,2007,33:921 -934.[2]张万义 朱荣生 曹卫东 李红.离心式纸浆泵的结构特点[J].中国造纸,2003,22(4):38.[3]李红 袁寿其 袁建平 等.基于泵内纸浆悬浮液数值计算的纸浆泵设计[J].江苏大学学报：自然科学版,2007,28(1):51-55.[4]杨建国.半歼式低浓度纸浆泵设计方法研究[J].现代制造技术与装备,2007,(6):8-9.[5]Tahsin E,Mesut G.Performance characteristics of a centrifugal pump impeller with running tip clearance pumping solid-liquid mixture[J].Journal of Fluids Engineering,2001,123(9):532 -538.[6]Tahsin E,Mesut G.Effects of tip clearance and impeller geometry on the performance of semi-open ceramic centrifugal fan impellers at elevated temperatures[J].Experimental Thermal and Fluid Science,2006,30(6):565 -577.[7]谈明高 刘厚林 吴贤芳.基于FLUENT的离心泵水力性能预测技术[J].排灌机械,2008,26(3):22-25.[8]刘炜巍.[D].镇江:江苏大学,2004.[9]陈次昌 杨昌明 王金诺 等.轴流泵端壁区域流动三维粘性数值计算[J].四川工业学院学报,2003,(S3):3-5.[10]操松林 丁强明 许元兰 等.开式叶片泵叶轮间隙的试验研究[J].流体机械,2002,30(9):4-6. |
|
|
|
