|
|
|
| Effects of nozzle location on new type annular jet pump performance |
| Xu Maosen1,2, Long Xinping1,2, Yang Xuelong1,2, Wu Wei1,2, Wang Xiaochuan1,2, Wang Xueying1,2 |
| 1.School of Power and Mechanical Engineering, Wuhan University, Wuhan, Hubei 430072, China; 2.Key Laboratory of Hubei Pro-vince for Water Jet Theory & New Technology, Wuhan, Hubei 430072, China |
|
|
|
|
Abstract A numerical simulation method was utilized to explore effects of nozzle location on perfor-mance of a new type annular jet pump(NTAJP). NTAJP has a newly-designed annular nozzle in which an annular jet is off the pump suction chamber wall and totally immerged in the sucked liquid compared with the conventional annular nozzle that the annular jet is along the chamber wall only. The NTAJP performance was numerically predicted and compared with the conventional pump. Effects of nozzle location on the performance were analyzed under different central suction nozzle-to-outer annular nozzle velocity ratios(vr). It was shown that NTAJP generally has better efficiency than the conventional one. The annular nozzle located at 8 mm away from the suction chamber wall has the best performance. For the NTAJP with the nozzle at 4 mm and 6 mm away from the wall respectively, the best vr is 1/1 when the flow ratio is ranged in 0.4-0.8. For the NTAJP with the nozzle at 8 mm away from the wall, however, the best vr is 3/1 in the same flow ratio range.
|
|
Received: 12 November 2013
|
|
|
|
| [1]Elger D F, Taylor S J, Liou C P. Recirculation in an annular-type jet pump[J]. Journal of Fluids Enginee-ring, 1994, 116(4): 735-740.[2]Shimizu Y,Nakamura S,Kazuhara S,et al. Studies of the configuration and performance of annular type jet pump [J]. Journal of Fluids Engineering,1987,109(3):205-212.[3]Kwon O B, Kim M K, Kwon H C, et al. Two-dimensional numerical simulations on the performance of an annular jet pump[J]. Journal of Visualization, 2002, 5(1): 21-28.[4]Xiao L, Long X, Li X, et al. Numerical investigation on the recirculation in annular jet pumps[J].Journal of Mechanical Science and Technology, 2013, 27(6):1603-1609. [5]鄢恒飞. 基于CFD的环形射流泵结构优化[D]. 武汉: 武汉大学动力与机械学院, 2010.[6]Long Xinping, Zeng Qinglong, Yang Xuelong, et al. Structure optimization of an annular jet pump using design of experiment method and CFD [C]//Proceedings of the IOP Conference Series: Earth and Environmental Science,2012:052020.[7]Yang Xuelong, Long Xinping, Kang Yong, et al. Application of constant rate of velocity or pressure change method to improve annular jet pump performance[J].International Journal of Fluid Machinery and Systems,2013, 6(3):137-143.[8]陆宏圻. 喷射技术理论及应用[M]. 武汉:武汉大学出版社,2004.[9]Mallela R, Chatterjee D. Numerical investigation of the effect of geometry on the performance of a jet pump[J]. Journal of Mechanical Engineering Science, 2011, 225(7): 1614-1625.[10]龙新平,程茜,韩宁,等. 射流泵最佳喉嘴距的数值模拟[J].核动力工程,2008,29(1): 35-38. Long Xinping, Cheng Qian, Han Ning,et al. Numerical simulation of optimal nozzle-to-throat clearance of jet pump[J]. Nuclear Power Engineering, 2008, 29(1):35-38.(in Chinese)[11]姚鑫, 龙新平, 鄢恒飞,等. 多孔喷嘴射流泵流场和性能的数值模拟[J].工程热物理学报,2011,32(S1):65-68. Yao Xin, Long Xinping, Yan Hengfei,et al. Numerical simulation on the flow field and performance of multi-nozzle jet pump[J]. Journal of Engineering Thermophy-sics, 2011, 32(S1):65-68.(in Chinese)[12]Namiki N, Kitamura O, Yamamoto M. Numerical prediction of performance of annular-type jet pump[J]. Transactions of the JSME, 1997, 607(63):950-956. [13]Gazzar M E,Meakhail T, Mikhil S. Numerical study of flow inside an annular jet pump[J]. Journal of Thermophysics and Heat Transfer, 2006, 20(4): 930-932.[14]Yang X, Long X, Yao X,et al. Numerical investigation on the mixing process in a steam ejector with different nozzle structures[J]. International Journal of Thermal Sciences, 2012,56:95-106.[15]陶文铨. 数值传热学[M]. 2版. 西安:西安交通大学出版社,2001. |
|
|
|
