|
|
|
| Analysis of influence factors on flow rate characteristics in gear pump |
| Kong Fanyu1, He Yuyang1, Zheng De2, Zhang Hui1, Xia Bin1 |
| 1.Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang, Jiangsu 212013, China; 2.Sinopec Yizheng Chemical Fibre Co. Ltd., Yangzhou, Jiangsu 211900, China |
|
|
|
|
Abstract In order to research the important influence factors of the coefficient of the flow rate pulsation φ on the external gear pump, the analytic way of deducing and simulation was adopted. By deducing the formulation of the coefficient of flow rate pulsation, the relationship between gear number, press angle and φ were analyzed. A numerical simulation of the transient flow field of the gear pump was performed by using the moving boundary condition and dynamic mesh method with k-ε turbulent model, and the relationships among the loading pressure,the clearance and the φ were achieved. The result shows that the coefficient of flow rate pulsation will decrease with the increasing of the gear number z or the pressure angle α. It is good for improving the flow rate characteristic of the gear pump. Furthermore, the gear number makes a very similar function in improving the flow characteristics with the pressure angle′s function. On the other hand, the coefficient of the flow rate pulsation will also decrease with the loading pressure p or the clearance δ increasing. The exaggerated loading pressure and clearance δ will lead to the volumetric efficiency decreasing, and this characteristics should be attached great importance in pump design procedure.
|
|
Received: 17 December 2012
|
|
|
|
| [1]Houzeaux G, Codina R. A finite element method for the solution of rotary pumps[J]. Computers & Fluid, 2007, 36(4):667-679.[2]Vande V J, Vierendeels J, Dick E. Flow simulation in rotary volumetric pumps and compressors with the fictitious domain method[J]. Journal of Computational and Applied Mathematics, 2004, 168(1/2):491-499.[3]Riemslagh K, Virendeels J, Dick E. Arbitrary Lagran-gian-Eulerian finite-volume method for simulation of rotary displacement pump flow[J]. Applied Numerical Mathematics, 2000, 32(4): 419-33.[4]李玉龙,王学军,顾广华. 外啮合齿轮泵困油历程的仿真研究[J].机械传动,2004,28(6):19-21. Li Yulong, Wang Xuejun, Gu Guanghua, et al. Simulating research on mutative trends of cubage and pressure among two gear of outer jogging gear pump[J]. Journal of Mechanical Transmission, 2004, 28(6):19-21.(in Chinese)[5]李玉龙, 孙付春.中高压外啮合齿轮泵端面间隙的理论计算[J].排灌机械工程学报,2012, 30(2): 148-152. Li Yulong, Sun Fuchun. Theoretical calculation of axial clearance in medium or high pressure external gear pumps[J].Journal of Drainage and Irrigation Machinery Engineering, 2012,30(2):148-152.(in Chinese)[6]宫柏秋. 齿轮泵参数化设计方法研究与系统实现[D]. 哈尔滨: 哈尔滨工业大学机电工程学院, 2008.[7]甘文彪, 周洲. 基于层流动能湍流模型的数值模拟方法[J]. 计算物理, 2013, 30(2):170-179. Gan Wenbiao, Zhou Zhou.Reynolds-averaged Navier-Stokes method with Laminar Kinetic energy turbulent model[J].Chinese Journal of Computational Physics,2013,30(2):170-179.(in Chinese)[8]张德胜,施卫东,张华,等.不同湍流模型在轴流泵性能预测中的应用[J].农业工程学报,2012, 28(1):66-71. Zhang Desheng,Shi Weidong,Zhang Hua,et al.Application of different turbulence models for predicting performance of axial flow pump[J]. Transactions of the CSAE, 2012, 28(1):66-71.(in Chinese)[9]Wasserman M, Mor-Yossef Y, Yavneh I, et al.A robust implicit multigrid method for RANS equations with two-equation turbulence models[J]. Journal of Computatio-nal Physics, 2010,229(16):5820-5842.[10]Balabel A, El-Askary W A.On the performance of linear and nonlinear k-ε turbulence models in various jet flow applications[J]. European Journal of Mechanics B/F-luids,2011, 30(3):325-340.[11]汪飞,李义天,葛华,等. 同位网格上SIMPLE算法收敛特性的Fourier分析[J].计算力学学报, 2013, 30(1):11-21. Wang Fei, Li Yitian, Ge Hua, et al. Fourier analysis of the convergence behaviors of SIMPLE algorithm on collocated grid[J]. Chinese Journal of Computational Mechanics,2013, 30(1):11-21.(in Chinese)[12]Udaykumar H S, Mattal R, Rampunggoon R, et al. A sharp interface cartesian grid method for simulating flows with complex moving boundaries [J]. Journal of Computational Physics, 2001, 174(1):345-380.[13]刘永丰, 张文平, 明平剑, 等. 一种动网格插值方法在内燃机CFD中的应用[J].内燃机工程,2013,34(1):86-92. Liu Yongfeng, Zhang Wenping, Ming Pingjian, et al.Dynamic mesh interpolation method applying in internal combustion engine CFD[J].Chinese Internal Combustion Engine Engineering,2013,34(1):86-92.(in Chinese)[14]岳向吉, 巴德纯, 刘坤, 等. 干式罗茨真空泵吸气级内流动的瞬态模拟[J].真空科学与技术学报,2012,32(9):850-855. Yue Xiangji, Ba Dechun, Liu Kun, et al.Transient numerical simulation of gas flow in suction stage of dry roots-type vacuum pump[J].Chinese Journal of Vacuum Science and Technology,2012,32(9):850-855.(in Chinese)[15]石丽娜, 陈志平, 章序文, 等. 基于动网格的高压煤浆输送泵内部流场数值模拟优化研究[J].高校化学工程学报,2012,26(3):403-411. Shi Lina, Chen Zhiping, Zhang Xuwen, et al.Numerical simulation and optimization of internal flow field in the high pressure coal conveying pump based on the dynamic mesh[J].Journal of Chemical Engineering of Chinese Universities,2012,26(3):403-411.(in Chinese) |
|
|
|
