|
|
|
| Development and application of environment-friendly blade adjusting device |
| Zhang Rentian1,2,3, Deng Dongsheng4, Zhu Honggeng2, Li Longhua3, Yue Xiubin4 |
| 1.Jiangsu Surveying and Design Institute of Water Resources Co. Ltd., Yangzhou, Jiangsu 225127, China; 2.College of Hydraulic Science and Engineering, Yangzhou University, Yangzhou, Jiangsu 225009, China; 3.College of Mechanical & Electronics Enginee-ring, Hohai University, Changzhou, Jiangsu 213022, China; 4.Jiangsu Water Supply Co. Ltd. in Eastern Route of S-to-N Water Diversion Project, Nanjing, Jiangsu 210029, China |
|
|
|
|
Abstract Blade adjusting is a main method for regulating operational conditions of large-size blade adjustable impeller pumps. An environment-friendly blade adjusting device was developed through a combination of mechanical adjusting mechanism with hydraulic one based on an analysis of shortcomings of existing conventional mechanical and hydraulic adjusting mechanisms. For the device, two designs were proposed, in one design the servo-cylinder is positioned between the pump and electric motor shafts, in the other design, the cylinder is positioned on the top of the hub of the impeller. Thus, the leakage of pressured hydraulic oil can be avoided by using reliable seals. A computational model was established to predict hydrodynamic force and moment of fluid on single blade based on 3D CFD technology. As a result, an approach was put forward in which the cylinder diameter and its operating pressure can be determined by means of a prescribed blade setting angle and predicted hydrodynamic moments at various operating points of pump. Additionally, the structure and governing principle of the conventional oil receptor head were updated and improved; and an oil receptor head with servo-cylinder, pressure control valve and digital proportional valve was innovated successfully. A 4‰ control accuracy has been reached for the device, thus an open/closed-loop control can be realized to adjust blade angle precisely.
|
|
Received: 14 May 2013
|
|
|
|
| [1]Hisashi S, Tokushi S, Sadao N, et al. Pumping Station Engineering Handbook[M]. Tokyo:Japan Association of Agricultural Engineering Enterprises, 1991.[2]Hiromichi A, Osami T, Masahiro T. Adjustable blade circulating water pump and controlling system[J]. Hitachi Review, 1983, 32(1):13-18.[3]Zhang Rentian, Deng Dongsheng, Zhu Honggeng. Structural features and optimal design of Baoying Pumping Station in China S-to-N Water Diversion Project[C]//Proceedings of the 9th Asian International Conference of Fluid Machinery, 2007.[4]沈阳水泵研究所. 叶片泵设计手册[M]. 北京:机械工业出版社,1983.[5]叶渊杰, 陈坚, 徐艳茹. 我国大泵叶片调节机构应用与研究综述[J]. 中国农村水利水电, 2009(8):153-156. Ye Yuanjie, Chen Jian, Xu Yanru. An overview of application and research for blade adjusting mechanism of large pumps in China[J]. China Rural Water and Hydropower, 2009(8):153-156.(in Chinese)[6]谈强, 张仁田, 林其文. 水泵叶片调节机构: 中国, 200820032837.4[P]. 2009-02-04.[7]邓东升, 马志华, 朱红耕. 轴流泵叶片水力矩三维紊流数值计算[J]. 排灌机械,2006, 24(5): 8-11. Deng Dongsheng, Ma Zhihua, Zhu Honggeng. 3-D turbulent calculation of hydraulic moment of axial-flow pump blades[J]. Drainage and Irrigation Machinery, 2006, 24(5): 8-11.(in Chinese)[8]魏培茹, 陈红勋, 路为.全调节轴流泵叶片的受力特性[J]. 上海大学学报:自然科学版, 2007, 13(3):314-319. Wei Peiru, Chen Hongxun, Lu Wei. Characteristics of the force acting on adjustable axial flow pump blade[J]. Journal of Shanghai University: Natural Science Edition, 2007, 13(3):314-319.(in Chinese)[9]朱红耕, 张仁田. 宝应泵站水泵叶轮力矩特性分析研究报告[R]. 扬州:扬州大学水利科学与工程学院,江苏省水利勘测设计研究院有限公司,2009.[10]雍成林, 朱承明, 阚永庚, 等. 水泵叶片液压调节受油器结构形式的探讨[J]. 南水北调与水利科技, 2010,8(5):162-166. Yong Chenglin, Zhu Chengming, Kan Yonggeng, et al. Structural types of oil-supply head in hydraulic vlade adjustment[J]. South-to-North Water Transfers and Water Science & Technology, 2010,8(5):162-166.(in Chinese)[11]黄志坚. 液压伺服与比例控制实用技术[M]. 北京:中国电力出版社, 2012.[12]沈祖诒. 水轮机调节系统分析[M]. 北京:水利电力出版社, 1991. |
|
|
|
