|
|
|
| Transient response of water lubricated bearing-rotor system |
| Ye Xiaoyan, Wang Jing, Gu Rengui, Feng Yaoning, Ye Qun |
| Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang, Jiangsu 212013, China |
|
|
|
|
Abstract Step and pulse loads are the transient loads with sharply and dramatically changing amplitudes. Therefore, when these loads are acted on a rotor, the axial centre of the rotor may be altered, resulting in a sudden change in bearings lubrication condition. A seawater desalination pump unit can experience different transient loads during startup, stopping and rotational speed variation. A fluid-structure interaction(FSI)model for the water lubricated bearing-rotor system in a seawater desalination pump unit was established to explore changes in lubrication condition and vibration dynamics under a transient load. Effects of rotor elastic deformation at different time instances on the circumferential pressure distribution, water film bearing capacity and axial centre position were analyzed by using CFD(computational fluid dynamics)and FSI methods when the rotor system was subject to step, rectangular and triangular pulse loads, respectively. The results showed that the axial centre position, file bearing capacity and maximum pressure in film can change greatly and exhibit a certain oscillation process under a transient load. Due to a pulse load applied in a limited period of time, once it disappears, the axial centre will restore its original balance position; for a step load, however, the centre will move to a new equilibrium position.
|
|
Received: 06 January 2013
|
|
|
|
| [1]蒋小平,施卫东,李伟,等.高压多级泵水润滑轴承-转子系统动力稳定性分析[J].农业工程学报,2012,28(22): 45-50. Jiang Xiaoping, Shi Weidong, Li Wei,et al. Dynamic stability analysis on water lubricated bearing rotor system of high pressure multistage pump[J].Transactions of the CSAE, 2012, 28(22): 45-50.(in Chinese)[2]Alex de Kraker, Ron A J van Ostayen, Daniel J Rixen. Calculation of stribeck curves for water-lubricated journal bearings [J].Tribology International, 2007,40(3):459-469.[3]李元生,敖良波,李磊,等. 滑动轴承动力特性系数动态分析方法[J].机械工程学报,2010,46(21):48-53. Li Yuansheng, Ao Liangbo, Li Lei, et al. Dynamic analysis method of dynamic character coefficient of hydrodynamic bearing[J].Journal of Mechanical Enginee-ring,2010, 46(21):48-53.(in Chinese)[4]Abdallah A Elsharkawy, Lotfi H Guedouar. An inverse solution for finite journal bearings lubricated with couple stress fluids[J].Tribology International,2001,34(2):107-118.[5]Singh U, Roy L, Sahu M.Steady-state thermo-hydrodynamic analysis of cylindrical fluid film journal bearing with axial groove[J].Tribology International, 2008,41(12):1135-1144.[6]刘宇,周建辉,戴明城. 水润滑轴承弹流动压润滑和摩擦特性数值计算分析[J]. 航海工程,2011,40(5):69-72. Liu Yu,Zhou Jianhui,Dai Mingcheng.Numerical analysis of elastic flow lubrication and friction characteristic of water lubricated bearings[J].Ship and Ocean Enginee-ring, 2011,40(5):69-72.(in Chinese)[7]林起崟,魏正英,唐一平,等. 高速滑动轴承流固耦合传热及流场分析[J].润滑与密封,2010,35(10):28-32. Lin Qiyin,Wei Zhengying,Tang Yiping, et al. Analysis on the fluid/solid coupled heat transfer and flow field of high-speed sliding bearings[J].Lubrication and Engineering,2010, 35(10):28-32.(in Chinese)[8]张楚,杨建刚,郭瑞,等.基于两相流理论的滑动轴承流场计算分析[J].中国电机工程学报,2010,30(29):80-84. Zhang Chu,Yang Jiangang,Guo Rui, et al.Simulation of journal bearing flow field using computational fluid dynamics two phase flow theory[J]. Proceedings of the CSEE, 2010, 30(29): 80-84.(in Chinese)[9]康宁,迟启明.基于N-S方程的径向滑动轴承油膜承载力的计算[J].润滑与密封,2010,35(10):9-12. Kang Ning,Chi Qiming.Calculation of oil film load of radial sliding bearing on N-S equation[J].Lubrication Engineering, 2010,35(10):9-12.(in Chinese)[10]马涛,戴惠良,刘思仁.基于FLUENT的液体动静压轴承数值模拟[J].东华大学学报:自然科学版, 2010, 36(3):279-282. Ma Tao,Dai Huiliang,Liu Siren.Numerical simulation study on liquid hybrid bearing based on FLUENT[J]. Journal of Donghua University:Natural Science,2010,36(3):279-282.(in Chinese)[11]张杰,郭宏升,牛犇,等.水润滑高速动静压滑动轴承数值模拟[J].农业机械学报,2008,39(6),159-162. Zhang Jie, Guo Hongsheng, Niu Ben, et al. Numerical simulation study on water-lubricated hydrostatic journal bearings[J].Transactions of the Chinese Society of Agricultural Machinery,2008,39(6):159-162.(in Chinese)[12]Gertos K P, Nikolakopolous P G, Papadopolous C A. CFD analysis of journal bearing hydrodynamic lubrication by Bingham lubricant[J].Tribology International, 2008,41(11):1190-1204.[13]余江波.基于资源节约与环境友好的高性能水润滑轴承关键技术研究[D].重庆:重庆大学机械工程学院,2006.[14]Meruane V, Pascual R. Identification of nonlinear dynamic coefficients in plain journal bearings[J].Tribology International, 2008,41(8):743-754.[15]罗大兵,吴鹿鸣,帅旗.径向动压滑动轴承主轴轴心轨迹的动态仿真[J].机械设计,2006,23(4):51-53. Luo Dabing,Wu Luming,Shuai Qi.Dynamic simulation track of main shaft axis of radial sliding bearing submitting dynamic pressure[J]. Journal of Machine Design, 2006,23(4):51-53.(in Chinese) |
|
|
|
