|
|
Hydraulic pressure switch sensors in Jianbi pumping station |
TAO Ding-ming |
Jianbi Pumping Station, Zhenjiang, Jiangsu 212006, China |
|
|
Abstract Discal tightwire hammer sensors used in valve′s hydraulic pressure switches in Jianbi Pumping Station were discussed,its limitation was analyzed,and other usual sensors characteristics were compared.Discal rubber sensors are prior to be selected at the requirements of Jianbi pumping station.Controlling principle and ways of parameters setting are described in details.In addition,outlet valves switches′ testing results of the No.3 pump show that sensors and switches controlling windage is less than 0.5% of criterions.Discal rubber sensors are tested to be capable of meeting expectations of linking valves with pumps,through running on-line for years.Its improving measures are also suggested to ensure the pumping station′s safety and reliability.sensor;pumping station;valve;hydraulic pressure switch
|
Received: 08 August 2013
|
|
|
|
[1] 徐付祥.谏壁抽水站技术改造后的试运行分析[J].排灌机械,2005,23(4):34-37[2] 李明俊,林震,董国喜.橡胶轮码盘在谏壁站液压启闭机上的应用[J].排灌机械,2000,18(2):14-16[3] 林建时,李明俊.镇江市谏壁抽水站技术改造探讨[J].排灌机械,2001,19(5):24-27[4] 何佳庆.谏壁抽水站闸门液压启闭机系统电气控制改造[J].排灌机械,2006,24(2):26-30 |
|
|
|