|
|
Special software development in selecting hydraulic model of axial flow pump |
YU Yong-hai, JIANG Xiao-ming |
Department of Agricultural Engineering, Hohai University, Nanjing, Jiangsu 210098, China |
|
|
Abstract There exist some relationships between the pump and the pump system.The method and procedure of selection of hydraulic model pump are presented.According to the above method,the efficiency of pump system is increased.The special software to select hydraulic model pump has been developed with Matlab and Visual C++ based on the data from the results of the Tianjin test.When the parameters of pumping station,the suitable hydraulic model pump,the rotating speed and the diameter of impeller of prototype pump are inputted,the curves of comprehensive characteristic will be obtained.The software has high value in the selection of axial flow pump.axial flow pump;hydraulic model pump;selection of pump;software
|
Received: 08 August 2013
|
|
|
|
[1] 刘宁,汪易森,张纲.南水北调工程水泵模型同台测试[M].北京:中国水利水电出版社,2006[2] 汤方平,刘超,成立.低扬程水泵选型新方法[J].水利水电科技进展,2001,21(4):41-43[3] 关醒凡,伍杰,朱泉容.南水北调东线已招标泵站水泵模型装置试验成果及分析[J].排灌机械,2006,24(1):7-13[4] 陈松山,颜红勤,陈玉明.大型泵装置系统性能预测理论探讨[J].排灌机械,1998,16(3):23-30[5] 张仁田.南水北调工程中大型泵站泵型选择的若干问题[J].水力发电学报,2003(4):119-127[6] 张林,于永海,姜晓明.基于B样条的水泵效率特性曲线拟合方法[J].排灌机械,2006,24(3):13-15 |
|
|
|