|
|
Research based on CAD system of drawing meridional plane in impeller of centrifugal pump |
WANG Yan-yan, LI Hong, JI Liu-jin |
Jiangsu University, Zhenjiang, Jiangsu 212013, China |
|
|
Abstract The method of drawing the centrifugal pump impeller meridional plane in the CAD system is by trying and collecting,that to say is,by modify the data again and again to adapt the design.This method causes blindness.In this article,the author puts forward to the method of flow path center line to design impeller from the flow path center line of excellent hydraulic model,and meanwhile using mathematics statistic and non-linear regression to deal with the data.The function between the numbers of average n_s and the points of flow path center lines can be obtained.On this foundation,the F-L curve and educe the equation of front and behind blades were deduced,which provides the whole course of drawing meridional plane.Examples show that method is feasible and has very high practical value.
|
Received: 08 August 2013
|
|
|
|
[1] 曹立新.在AutoCAD For Windows平台下开发水泵CAD系统的软件编程技术[J].排灌机械,1998,16(4):38-42[2] 戴玉姝,王霄,蔡兰.离心泵叶轮扭曲叶片参数化实体造型方法探讨[J].排灌机械,2004,22(1):20-22[3] 关醒凡.现代泵技术手册[M].北京:宇航出版社,1995:203-204[4] 王艳艳.深井泵的设计[D].邯郸:河北工程大学,2004[5] 赵文生,罗京翔,范玉青.NURBS方法设计离心泵叶轮轴面流线[J].航空精密制造技术,1996,32(6):20-23[6] 赵林明,习华勇.数据拟合方法程序设计及其应用[M].石家庄:河北科学技术出版社,2002:31-37[7] 陈田,殷国富,戈鹏.Bezier曲线在水泵叶轮CAD中的应用方法[J].计算机集成制造系统-CIMS,2001,7(1):55-59[8] 张人会,杨军虎.基于样条曲线的水泵叶片流线控制方法[J].排灌机械,2005,23(1):7-9 |
|
|
|