|
|
|
| Flow characteristics of high-order ellipse bevel gear pump |
| Lin Chao1， Hou Yujie1,2， Gong Hai1， Zeng Qinglong1， Nie Ling1 |
| (1.State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China; 2.86 Detachment 96263 PLA Troops, PLA, Luoyang, Henan 471500, China) |
|
|
|
|
Abstract Aiming at the function of variable displacement gear pumps and the application of noncircular bevel gears, a kind of new intersection axis variable gear pump named higher order elliptic bevel gear pump was proposed. The gear pump is a non-circular bevel gear pump which takes the high-order ellipse bevel gear as working rotor. The gear profile formative method of gear rotor can be provided based on the space engagement theory. Transmission characteristic of the pump was analyzed according to the special kinematic traits of ellipse gear. Average theoretical flow formula, instantaneous flow formula and flow pulsation formula of this pump were deduced base on the differential theory of spherical space. Meanwhile the impact of eccentricity ratio and exponent number on flow characteristic was also analyzed. Average theoretical flow and instantaneous flow of high-order ellipse bevel gear pump were compared with both cylindrical gear one and noncircular cylindrical gear one under the same work condition and similar model parameter, and which shows that the characteristic of high-order ellipse bevel gear pump owns the features of higher delivery and wider range of variation.
|
|
Published: 30 September 2011
|
|
|
|
| [1] 丛小青,刘梦仙,乌 骏.直线-共轭内啮合齿轮泵的设计方法[J].排灌机械, 2008,26(1):33-36.Cong Xiaoqing,Liu Mengxian,Wu Jun. Design method of straightconjugate internal gear pump[J].Drainage and Irrigation Machinery,2008,26(1):33-36.(in Chinese)[2] 林 超,侯玉杰,冉小虎,等.高阶椭圆锥齿轮传动的运动仿真及干涉检查[J].重庆大学学报,2010,33(10):1-6.Lin Chao,Hou Yujie,Ran Xiaohu,et al. Transmission model of higherorder elliptical bevel gearing and motion simulation for interference checking[J].Journal of Chongqing University,2010,33(10):1-6.(in Chinese)[3] Xia Jiqiang,Liu Yuanyuan,Geng Chunming,et al. Noncircular bevel gear transmission with intersecting axes[J].Journal of Mechanical Design, 2008, 130(5):1-6.[4] 贾巨民,高 波,赵德龙.基于保测地曲率的非圆锥齿轮传动设计分析方法[J].机械工程学报,2008,44(4):54-57.Jia Jumin,Gao Bo,Zhao Delong. Analysis method for noncircular bevel gearing based on geodesic curvature preserving mapping[J].Chinese Journal of Mechanical Engineering, 2008,44(4):54-57.(in Chinese)[5] Danieli G A,Mundo D. New developments in variable radius gears using constant pressure angle teeth [J].Mechanism and Machine Theory,2005,40(2):203-217.[6] 王维新.基于四轴联动立式加工中心的非圆齿轮滚齿系统[J].江苏大学学报:自然科学版,2004,25(2):157-159.Wang Weixin. Noncircular gear hobbing system based on fouraxis gang manipulative vertical machining center[J].Journal of Jiangsu University: Natural Science Edition,2004,25(2):157-159.(in Chinese)[7] Bair B W,Sung M H,Wang J S,et al. Tooth profile generation and analysis of oval gears with circular arc teeth [J].Mechanism and Machine Theory,2009,44(6): 1306-1317.[8] Zhang Rui,Wu Xutang. Design of noncircular gears with discontinuous pitch curve[J].Journal of Mechanical Engineering,2006,19(4):594-599.[9] 李特文.齿轮几何学与应用理论［M］.叶凌云,译.上海:上海科学技术出版社,2008:52-61. |
|
|
|
